Dyno Discussion and Slips Discussion and a moderated "Dyno Slips" sub-forum to allow for posting of dyno slips.

Not a Maxima nor Nissan but.....

Thread Tools
 
Search this Thread
 
Old Feb 23, 2009 | 10:24 PM
  #1  
99ACCORDonHubs's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2001
Posts: 713
Not a Maxima nor Nissan but.....

Here is the Dyno of my N/A Acura CLS 6MT. It has just about all the bolt ons availible to the car.

Run 10 is before my custom 3 inch exhuast.
Run 12 is with the custom 3 inch exhuast.

The car is totally untuned and running off the stock ECU so once I get around to tuning it should pick up a little more power im assuming.

Old Feb 24, 2009 | 05:54 AM
  #2  
sparks03max's Avatar
DO NOT DO BUSINESS WITH THIS MEMBER - OWES PEOPLE MONEY
iTrader: (7)
 
Joined: Jan 2008
Posts: 3,468
From: Greensboro, NC
Originally Posted by 99ACCORDonHubs
Here is the Dyno of my N/A Acura CLS 6MT. It has just about all the bolt ons availible to the car.

Run 10 is before my custom 3 inch exhuast.
Run 12 is with the custom 3 inch exhuast.

The car is totally untuned and running off the stock ECU so once I get around to tuning it should pick up a little more power im assuming.
Your A/F looks pretty lean already, maybe something to gain from timing. What does this car weigh?
Old Feb 24, 2009 | 10:04 AM
  #3  
95BLKMAX's Avatar
Senior Member
iTrader: (10)
 
Joined: Jun 2003
Posts: 2,317
From: Miami, FL
I must say that TQ curve is quite beautiful. What year is this?
Old Feb 24, 2009 | 10:09 AM
  #4  
Bjs470's Avatar
Senior Member
iTrader: (13)
 
Joined: May 2008
Posts: 1,733
From: Chicago, IL
looks good
Old Feb 24, 2009 | 10:12 AM
  #5  
99ACCORDonHubs's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2001
Posts: 713
Yea the A/F is pretty good right now. The only problem with these cars is that its just about impossible to advance timing and tune. We are stuck with only AF.

The car is a 2003
Old Feb 24, 2009 | 02:46 PM
  #6  
PulsarGTS's Avatar
Senior Member
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,400
From: Cininnati, OH
What does the car trap in the 1/4? And what were the SAE numbers?
Old Feb 24, 2009 | 04:02 PM
  #7  
99ACCORDonHubs's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2001
Posts: 713
Originally Posted by PulsarGTS
What does the car trap in the 1/4? And what were the SAE numbers?
Havent put it on the track since this dyno which was in November. As far as the SAE numbers just take off like 8-10hp if you want which should be more than enough
Old Feb 24, 2009 | 06:17 PM
  #8  
ajcool2's Avatar
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
It traps slow lol. j/k
Old Feb 24, 2009 | 06:49 PM
  #9  
99ACCORDonHubs's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2001
Posts: 713
Originally Posted by ajcool2
It traps slow lol. j/k
He is right, its very slow
Old Mar 1, 2009 | 03:52 PM
  #10  
ShIft_uR FacE's Avatar
Senior Member
iTrader: (4)
 
Joined: Aug 2005
Posts: 520
What exactly are all the bolt-ons available for your car? I/H/E/P ? That car is a 3.2 and is putting down more power than our 3.5? Nice.
Old Mar 1, 2009 | 08:12 PM
  #11  
2002AltimateV6's Avatar
Senior Member
iTrader: (7)
 
Joined: Aug 2005
Posts: 547
From: Tacoma, WA
That'd have to be a LARGE list of N/A modifications since most supercharged CLS are getting around the same numbers (depending on boost)

Did a little research. Interesting build. And FYI for all, this isn't as simple as bolt-ons.

Last edited by 2002AltimateV6; Mar 1, 2009 at 08:31 PM.
Old Mar 3, 2009 | 04:16 PM
  #12  
i2vicious2's Avatar
SCAMMER DO NOT BUY FROM FOR NOW
iTrader: (5)
 
Joined: Apr 2008
Posts: 657
From: Maryland
what are ur SAE numbers?
Old Mar 3, 2009 | 04:49 PM
  #13  
ghostmax301's Avatar
Senior Member
iTrader: (7)
 
Joined: Oct 2002
Posts: 2,524
Originally Posted by i2vicious2
what are ur SAE numbers?
^same question
Old Mar 9, 2009 | 03:39 PM
  #14  
99ACCORDonHubs's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2001
Posts: 713
Originally Posted by 2002AltimateV6
That'd have to be a LARGE list of N/A modifications since most supercharged CLS are getting around the same numbers (depending on boost)

Did a little research. Interesting build. And FYI for all, this isn't as simple as bolt-ons.
Good job, I did my research to at one point which is why i ended up with the power I have.

I am looking to get on the dyno and get tuned with some new toys if they come next week so you can research what the new mods might be

I will update you this when I do but expect new numbers to cross over 300whp SAE
Old Mar 9, 2009 | 03:43 PM
  #15  
99ACCORDonHubs's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2001
Posts: 713
Originally Posted by i2vicious2
what are ur SAE numbers?
Originally Posted by ghostmax301
^same question

284whp 258wtq ... 12whp 9wtq loss. If only the CL was as light as the Maxima
Old Mar 9, 2009 | 08:08 PM
  #16  
2002AltimateV6's Avatar
Senior Member
iTrader: (7)
 
Joined: Aug 2005
Posts: 547
From: Tacoma, WA
Originally Posted by 99ACCORDonHubs
Good job, I did my research to at one point which is why i ended up with the power I have.

I am looking to get on the dyno and get tuned with some new toys if they come next week so you can research what the new mods might be

I will update you this when I do but expect new numbers to cross over 300whp SAE
I'm not hating at all, I was just a little skeptical about a simple 3.2 with bolt-ons making that much power. So I HAD to do a little research.. But even with the amount of work those are still some very respectable numbers.

I had also taken a ton of heat when I wouldn't tell others my modifications. But as you can see by my signature I folded. Keep 'em guessing, even if they hate you for it. Easier to make money that way if ya' know what I mean, haha!
Old Mar 14, 2009 | 07:16 PM
  #17  
Zack342's Avatar
Supporting Maxima.org Member
iTrader: (89)
 
Joined: Mar 2004
Posts: 6,226
From: Quincy, MA
what are you mods can you list them?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
xUNIxPanther
8th Generation Maxima (2016-)
6
Aug 27, 2015 10:09 PM
District
5th Generation Maxima (2000-2003)
8
Aug 15, 2015 08:23 PM
niZ
Maximas for Sale / Wanted
4
Aug 7, 2015 10:18 PM
julian888
7th Generation Classifieds (2009-2015)
0
Aug 6, 2015 04:39 AM
julian888
New Member Introductions
1
Aug 5, 2015 08:26 PM




All times are GMT -7. The time now is 05:25 PM.