swapmeetlouie

I just switched to penzoil full synthetic for my Max, but I have always run Shell Rotella T full synthetic in my '02 Yamaha WR426 dirt bike. I think my Max likes it way better.... I have been changing my own oil and was wondering what you guys have had good luck with and what prices.

MannyNJ2k2max

iTrader: (3)

Mobil 1 synthetics

swapmeetlouie

how much is it and where do you get it?

Luquire

Screw Penzoil. If you are going to go synthetic get mobil one, Amsoil, Redline, or what I AM using ROYAL PURPLE
Royal Purple is the best i have come across

Colonel

want to check out the fluid and lubrication section...much more information there OTHER than opinion...like fact

MaximaPolak

iTrader: (9)

That should answer the Question.

swapmeetlouie

thanx bro, I appreciate the heads up

Virus

iTrader: (1)

I'll second that notion. Don't go by peoples opinions as everyone has their favorite brand. The fluid and lubricants section of the board have a wealth of info.

While Royal Purple does well in racing, it doesn't hold up very well at all for extrended drain intervals and tends to break down quickly. Both Amsoil, Redline and Mobil 1 (SuperSyn only) provide far superior characteristics compared to the rest. Check out the oil analysis spreadsheet in the fluids section and you will find that Amsoil tends to be the best, followed by Redline and Mobil 1. No oil will give you tremendous boosts in hp or mpg. Mobil 1 is easily available. Amsoil provides up to 1 year drain intervals, which saves you a ton of money.

swapmeetlouie

Virus, do you have a favorite vendor that you use to get good deals on Amsoil or any oil for that matter?

Virus

iTrader: (1)

I normally buy from iwannabmw here. www.mdvsynthetics.com. However, talkinghorse offers the same discounts and both of them are very highly regarded for their outstanding customerservice. I usually get mine within 2 days after ordering.

Just be sure to mention maxima.org to them and they will offer you huge discounts off retail.

Virus

iTrader: (1)

I've used Amsoil for about 11 years now. When I had an apartment for a couple of years and wasn't allowed to change my oil in the parking lot, I went with Mobil 1 and did 5k oil changes.

MaximaPolak

iTrader: (9)

I change my mobile 1 Syn (pic on post 6) every 3500 miles.....I need to change it soon. Winter is bad on an engine.

90maxgxe

castrol 20w50 every 2-3000k mi.(6 months) 192k miles strong

MaxSE03

iTrader: (1)

Mobil 1 5w30

$19.00 for the 5 quart bottle from Wal-Mart.

Danny95

penzoil any good? w30?

Love_00_Max

Iam not a great fan of synthetics !!!!

I used to be a loyal Mobil 1 Drive clean user but I switched to Pennzoil dino sometime back and my Max loves it.

Looks like Pennzoil is better for stop and go traffic and my car is well behaved and acceleration better. I don't know if it has got to do with engine oil but I don't see myself going back to Mobil anytime!!! Pennzoil is great -- I would think their synthetics would be equally good too.

Push2TheMax

Mobile 1 Synthetic. $17.10 for the 5quart bottle from Wal-Mart. Get a 10% discount! OH YA!

Virus

iTrader: (1)

Oil analysis doesn't lie. The only dino oil worth using is Castrol GTX.

itdood

That's exactly what I use in all my cars (the higher mileage ones I use 10w-30)

$18 @ walmart. 5 single quarts at pep boys is about $3-4 more.

00Max00

Where do you live in? how can you get 10% discount on mobil1? The lowest price from walmart here is $19.88. I bought my mobil1 from samsclub for $23.33/carton

03maximan

Using Amsoil 5W-30, bought from talkinghorse (great to do biz with). Plan on getting about 20,000 miles on the oil with a filter change at 10,000 miles.
Like Virus said: UOA don't lie.

trey

mobil 1 and amsoil, whichever i happen to buy.

NuJerseyDrive

iTrader: (3)

I used conventional oil for the 1st 10,000 miles, I then switched to Mobil 1 and used that till 70,000 (week and a half ago). I am now using Amsoil (from talkinghorse, who was very helpful) and I honestly notice a difference. My car is running much smoother...almost effortless. I'm more than satisfied with this purchase!

† ErV †

mobil 1 supersyn with the bosch 3323 filter. the previous oil change i used the mobil 1 filter but dammit, 13$ for a filter?

so i reverted back to the bosch. it may have the tendency to get stuck but I don't mind using the channel locks (and i change the oil every 5k so it doesn't really matter).

Virus

iTrader: (1)

Bosch makes good filters. You could buy the K&N filters. They are almost identical to the Mobil 1 and both are made by Champion labs. The K&N usually costs around $8.

MrGone

iTrader: (30)

Castrol GTX + Napa Gold oil filters

TZapper

I think that turbo95max and/or hakk97se are amsoil dealers and will give you a discount. They are both from NorCal. Check out the west coast section on this forum.

2002 Maxima SE

iTrader: (3)

Thats a bit much. I change mine every 5k. I just did a change at 4200 (was going on a trip) and sent it in for analysis. With 30k on the clock, Blackstone lab said all looked well and I could probably increase the drain interval to 6k.

Will try that on the next drain and lab test.

† ErV †

Thanks. Never even thought about K&N.

my99maxisnice

Castrol GTX 10w30 and Nissan OEM filter...3.50 with org discount and Jerry Rome Nissan

gsleve

I use synlube, vehicle is running flawlessly have not changed out for 30k, analysis was near perfect. Have changed the oil filter twice

iwannabmw

iTrader: (3)

Do you have the analysis posted anywhere? I haven't seen anyone actually post one on Synlube yet and would love to see it!

NismoMax80

iTrader: (6)

How did you get the org discount?

I checked the site and saw the 15208-9E000 filter is for 1995-2001. Will it also work for my 04? They have the inferior 1520865F00 listed for mine.

thanks

gsleve

No I have not posted it, the analysis is a little different than most in that it contains data that is non conventional to other oil analysis, ie: there will be a higher number of solids which in fact is really the coloidal properties of the oil, whereas a conventional analysis would flag this, another example would be in area of Iron or fe, the type of antioxidants used in this lubricant has a higher fe count than normally expected, this as well would be flagged.

Additionally the thresholds that are set and adhered to in a conventional analysis, are much higher in synlube due in part that the chemistry of the oil it being radically different, therefore the numbers can be misinterpreted, one has to have a baseline of the virgin sample and work from this premise forward in order to calculate the data properly, and know intimately how this oils chemistry reacts with metals to know what is considered normal or abnormal.

Given this I'm a little apprehensive to post some of this data due that this may incite a unhealthy debate instead of a healthy one yet I'll give it some thought and see in the interim when I get some time, I'll try differentiate the data so as to make comparisons, I have not posted in quite some time have been too busy with work, yet I'll see what I can do.

aznsap

iTrader: (29)

are you using the oem nissan filter? i thought those weren't supposed to be used more than 5k miles or something like that?