Belt Size for Vortech 3.125" Pulley
#1
Belt Size for Vortech 3.125" Pulley
My friend told me to post on this site. I have a 6rib 3.125" pulley from Vortech and want to know what size 6-rib belt I need and where I can order it online or what major automotive stores have them.
Thanks!
Thanks!
#2
#4
Originally posted by Bandit
I did a search previously to asking the question and could only find out that the 3.33" can use the stock belt. I couldn't find anything about 3.125" but I'll look again.
I can already tell this guy's a ****
I did a search previously to asking the question and could only find out that the 3.33" can use the stock belt. I couldn't find anything about 3.125" but I'll look again.
I can already tell this guy's a ****
#6
Originally posted by SprintMax
i think the 4th link/post in that link i posted has the belt size.. got some good reading too.. good knowledge and know how.. i love it when Y2KevSE talks dirty about belts and pulleys
i think the 4th link/post in that link i posted has the belt size.. got some good reading too.. good knowledge and know how.. i love it when Y2KevSE talks dirty about belts and pulleys
#9
actuall break down of belts and pulleys - http://forums.maxima.org/showthread....5&pagenumber=5
where to purchase -
where to purchase - http://www.google.com/search?hl=en&i...=Google+Search
where to purchase -
Originally posted by i30krab
Y2KevSE'
What gates belt are you using with the 3.125 midget?
I'm installing one and I'm wondering if my current K060705 belt will fit or should I go down one size.
Also, Vortech has some links on their site and one is a place called Auto Specialities. I called and they will make custom steel coated aluminum idler and tension pulleys to replace the composite pulleys that came with the kit. I'll feel better with these pulleys since I'll be running 12 lbs of boost. Vortech said If a bearing locks up for just a second under high boost the plastic pulley will self destruct!
If anyone is interested, you can also get the pulleys at $85.00 a piece plus shipping and a donation 0f $5.00 to help defray the $65.00 that stillin charged me for the plastic pulleys to send to auto specialties. I must know very soon because it takes 3 weeks to make them! All money must be paid in advance, no hemming and hawing This is cheap insurance for people running high boost.
Y2KevSE'
What gates belt are you using with the 3.125 midget?
I'm installing one and I'm wondering if my current K060705 belt will fit or should I go down one size.
Also, Vortech has some links on their site and one is a place called Auto Specialities. I called and they will make custom steel coated aluminum idler and tension pulleys to replace the composite pulleys that came with the kit. I'll feel better with these pulleys since I'll be running 12 lbs of boost. Vortech said If a bearing locks up for just a second under high boost the plastic pulley will self destruct!
If anyone is interested, you can also get the pulleys at $85.00 a piece plus shipping and a donation 0f $5.00 to help defray the $65.00 that stillin charged me for the plastic pulleys to send to auto specialties. I must know very soon because it takes 3 weeks to make them! All money must be paid in advance, no hemming and hawing This is cheap insurance for people running high boost.
where to purchase - http://www.google.com/search?hl=en&i...=Google+Search
#11
Originally posted by Chebosto
cant you just GO to the gates website and seach for a local dealer?
cant you just GO to the gates website and seach for a local dealer?
http://www.gates.com/automotive/dist...ocation_id=539
#13
Originally posted by Chebosto
cant you just GO to the gates website and seach for a local dealer?
cant you just GO to the gates website and seach for a local dealer?
www.gatesbelts.com does not work.
#14
#15
Originally posted by SprintMax
:-D another free post
http://www.gates.com/automotive/dist...ocation_id=539
:-D another free post
http://www.gates.com/automotive/dist...ocation_id=539
#17
Originally posted by Bandit
Thanks, someone told me it was gatesbelts.com
Anyways, I ordered from courtesy, it was like $35 shipped.
Thanks for the help!
Thanks, someone told me it was gatesbelts.com
Anyways, I ordered from courtesy, it was like $35 shipped.
Thanks for the help!
#18
Originally posted by Y2KevSE
The belt will cost WAY less than that if you went to a local Napa store. I can almost buy 2 belts for that price.
The belt will cost WAY less than that if you went to a local Napa store. I can almost buy 2 belts for that price.
Unfortunately, only when I used to goto Cali would I see Napa's, I don't see them anywhere else I travel.
I really appreciate the help and advice though.
#19
Originally posted by Bandit
We dont' have Napa's here, I did a search for Gates and found one local retailer but they're super expensive as well and would also have to order it, and if I have to order it I'd rather just have it shipped to my house.
Unfortunately, only when I used to goto Cali would I see Napa's, I don't see them anywhere else I travel.
I really appreciate the help and advice though.
We dont' have Napa's here, I did a search for Gates and found one local retailer but they're super expensive as well and would also have to order it, and if I have to order it I'd rather just have it shipped to my house.
Unfortunately, only when I used to goto Cali would I see Napa's, I don't see them anywhere else I travel.
I really appreciate the help and advice though.
#22
Supporting Maxima.org Member
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by Y2KevSE
The belt will cost WAY less than that if you went to a local Napa store. I can almost buy 2 belts for that price.
The belt will cost WAY less than that if you went to a local Napa store. I can almost buy 2 belts for that price.
Like Kev stated above NAPA belts are Gates belt flip the carton over and read it. The belt number is K0605705, if is wrong Kev will corrct me. If you did your own pulley swap hoped you shaved down the plate that holds the V2 blower
#25
Originally posted by Y2KevSE
@ injector upgrade with 2.87. Have I blown up yet? My A/F looks fine to me.
@ injector upgrade with 2.87. Have I blown up yet? My A/F looks fine to me.
That's what Matt suggested to me.
So I guess it's a green light for me to get the 2.87" pulley.
#26
Originally posted by Cumalot
That's what Matt suggested to me.
So I guess it's a green light for me to get the 2.87" pulley.
That's what Matt suggested to me.
So I guess it's a green light for me to get the 2.87" pulley.
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM