Hit 10PSI again! had a 2-3PSI problem..whatever I did tonight
10-22-2002, 04:43 PM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Hit 10PSI again! had a 2-3PSI problem..whatever I did tonight
After so much talk on the SE forums about Dyno tuning and possibly going to the track this Friday, I got home woke up and messed with the air ambient sensor and checked it out, I had the BOV kind of too loose, went on a test drive and only hit 8 PSI, then the belt slipped at 5700RPMS I can hear it. Came home this tighten it to have just a 1/4 of inch play which I thought I had done that last week
. Just went on another test run and I hit 10PSI very fast in 2nd gear
, boy I am so happy to see my boost gauge climb so fast up there. It is a site of relief. The pulley I am using is the 3.25 pulley and yes I am 5 speed. Thing pulls so hard in this nice cool weather. I still need a bit more power and loose a bit of more weight some where I would like to see lower 13's. Now I am starting to sound like Mardigrasmax
. Just went on another test run and I hit 10PSI very fast in 2nd gear, boy I am so happy to see my boost gauge climb so fast up there. It is a site of relief. The pulley I am using is the 3.25 pulley and yes I am 5 speed. Thing pulls so hard in this nice cool weather. I still need a bit more power and loose a bit of more weight some where I would like to see lower 13's. Now I am starting to sound like Mardigrasmax
10-22-2002, 05:00 PM
#3
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by Cumalot
Hm...I wonder maybe I need to tighten my belt too. So far I only get 8psi. I can still turn the belt about 90 degrees, too loose?
Hm...I wonder maybe I need to tighten my belt too. So far I only get 8psi. I can still turn the belt about 90 degrees, too loose?
10-22-2002, 05:02 PM
#4
Senior Member
Join Date: Jan 2002
Posts: 876
hey man, I should be getting my sprints on fri, so maybe you can cut them on sat? Congrats on your car, hopefully, when you cut the springs for me, you can do for my SC what you did for yours. When you say 45-60 degrees, you mean taking the belt in hand and trying to turn it, where does the belt tighten and what size drive? Thanks.
10-22-2002, 05:09 PM
#5
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by brodaiga
hey man, I should be getting my sprints on fri, so maybe you can cut them on sat? Congrats on your car, hopefully, when you cut the springs for me, you can do for my SC what you did for yours
hey man, I should be getting my sprints on fri, so maybe you can cut them on sat? Congrats on your car, hopefully, when you cut the springs for me, you can do for my SC what you did for yours
10-22-2002, 05:14 PM
#8
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by brodaiga
hmmm, you can tell me about it when you help me out with the sprints
hmmm, you can tell me about it when you help me out with the sprints
, come spank some rice out there you wont regret it. Is fun addicting. Lets roll out. You want me to ask your folks for permission
10-22-2002, 05:16 PM
#9
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by JAY25
Lets roll out to the track man! you have a 2.87 pulley every mod in the book except the ME VI, get that car out of the drive way. It does that car no good to kick it in the porch, come spank some rice out there you wont regret it. Is fun addicting. Lets roll out. You want me to ask your folks for permission
Lets roll out to the track man! you have a 2.87 pulley every mod in the book except the ME VI, get that car out of the drive way. It does that car no good to kick it in the porch
, come spank some rice out there you wont regret it. Is fun addicting. Lets roll out. You want me to ask your folks for permission
Baggy you rolling out to the track with us too or thats a no go?
Brodaige if Baggs comes out the porch then you have to come out the porch and play.
10-22-2002, 05:19 PM
#10
Senior Member
Join Date: Jan 2002
Posts: 876
Originally posted by JAY25
Baggy you rolling out to the track with us too or thats a no go?
Brodaige if Baggs comes out the porch then you have to come out the porch and play.
Baggy you rolling out to the track with us too or thats a no go?
Brodaige if Baggs comes out the porch then you have to come out the porch and play.
10-22-2002, 05:22 PM
#11
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by brodaiga
I be coming out the porch, when I get my suspension done, lol. Sounds like a fun though! My only reservation is ruining my new tires?Otherwise, I'm down.
I be coming out the porch, when I get my suspension done, lol. Sounds like a fun though! My only reservation is ruining my new tires?Otherwise, I'm down.
The only way you will ruin your tires is if you go out there and do burn out every time or you want to show the girls some serious smoke. Just dont do no burn outs and you will just fine. If suspension is troubling you if you get your stuff on Thurs maybe I can do it then therefor you can roll out there w/us.
10-22-2002, 05:23 PM
#12
Originally posted by JAY25
I had it with a 1/4 of an inch play in New Orleans. After removing the blower and shaving it down and re installing it, I never tightened the belt the way I had it. Kev said it was about a 1/4 of inch play and thats what I have. As a matter of fact I did some work on a new 5th gen this past saturday and his belts only had a 1/4 of inch play. So that is proper the 1/4 of an inch play. like around 45-60 degree angle twist any more twist you have to use a little force
I had it with a 1/4 of an inch play in New Orleans. After removing the blower and shaving it down and re installing it, I never tightened the belt the way I had it. Kev said it was about a 1/4 of inch play and thats what I have. As a matter of fact I did some work on a new 5th gen this past saturday and his belts only had a 1/4 of inch play. So that is proper the 1/4 of an inch play. like around 45-60 degree angle twist any more twist you have to use a little force
Wow, if that's the case, I definitely have to tighten mine up a bit.
10-22-2002, 07:58 PM
#15
I'll be rolling up there with my car club. And we'll finally see how much this LSD is helping my launch.
Originally posted by JAY25
Baggy you rolling out to the track with us too or thats a no go?
Brodaige if Baggs comes out the porch then you have to come out the porch and play.
Baggy you rolling out to the track with us too or thats a no go?
Brodaige if Baggs comes out the porch then you have to come out the porch and play.
10-23-2002, 05:56 AM
#16
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by bags533
No Go
No Go
baggs thats alright youll make it one day, I got another three full years. Shadow about what time you and your club going up there? You got a new tranny with LSD? I would like to see you put up some nice numbers since with that LSD.
GTR I was suppose to be riding down to Miami around the Feb time period but not sure if that will come thru or not. Depends on my father.
10-23-2002, 07:58 AM
#18
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Re: Re: Hit 10PSI again! had a 2-3PSI problem..whatever I did tonight
Originally posted by MardiGrasMax
Who's yo daddy!!!
Who's yo daddy!!!
just trying to drop my numbers a bit in the lower 13's
10-23-2002, 08:57 AM
#19
We're going to get there around 6 or so.
And my tranny is the same, I just had an LSD custom built (and I am selling them for all you auto owners)
And my tranny is the same, I just had an LSD custom built (and I am selling them for all you auto owners
)
Originally posted by JAY25
baggs thats alright youll make it one day, I got another three full years.
Shadow about what time you and your club going up there? You got a new tranny with LSD? I would like to see you put up some nice numbers since with that LSD.
GTR I was suppose to be riding down to Miami around the Feb time period but not sure if that will come thru or not. Depends on my father.
baggs thats alright youll make it one day, I got another three full years. Shadow about what time you and your club going up there? You got a new tranny with LSD? I would like to see you put up some nice numbers since with that LSD.
GTR I was suppose to be riding down to Miami around the Feb time period but not sure if that will come thru or not. Depends on my father.
10-23-2002, 10:29 AM
#20
Senior Member
Join Date: Dec 2001
Posts: 2,084
Originally posted by Shadow
We're going to get there around 6 or so.
And my tranny is the same, I just had an LSD custom built (and I am selling them for all you auto owners)
We're going to get there around 6 or so.
And my tranny is the same, I just had an LSD custom built (and I am selling them for all you auto owners
)
10-23-2002, 10:37 AM
#21
Lake Lucerne? Yeah, that was me. I saw your car, but I didn't know it was you at first. I was wondering why I hadn't seen it around lately, then I recognized you and tried to wave, but it was too late.
Originally posted by JAIMECBR900
Was that you that drove by when I was at my mailbox the other day? I had just gotten home from work and was out getting the mail by the street and heard something come by and when I looked over it looked like your car from behind....????
Was that you that drove by when I was at my mailbox the other day? I had just gotten home from work and was out getting the mail by the street and heard something come by and when I looked over it looked like your car from behind....????
10-23-2002, 10:49 AM
#22
Senior Member
Join Date: Dec 2001
Posts: 2,084
Originally posted by Shadow
Lake Lucerne? Yeah, that was me. I saw your car, but I didn't know it was you at first. I was wondering why I hadn't seen it around lately, then I recognized you and tried to wave, but it was too late.
Lake Lucerne? Yeah, that was me. I saw your car, but I didn't know it was you at first. I was wondering why I hadn't seen it around lately, then I recognized you and tried to wave, but it was too late.
What's the name of your parents place? The girls at the office were looking for a new place to get their grub from, and I mentioned your place but forgot what's it's called.
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM
doctorpullit
8th Generation Maxima (2016-)
60
12-12-2015 09:39 AM
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM