Attn: x-drilled/slotted rotors owner, directions?
Attn: x-drilled/slotted rotors owner, directions?
I got the completed 4 set from raceconcepts.net, and believed I may have put the rotors on the wrong side after doing some research here.
On my driver side both the rotors face this direction in my cheesy drawing, plz tell me if this is right or not, thanks!
- ßaller
On my driver side both the rotors face this direction in my cheesy drawing, plz tell me if this is right or not, thanks!
- ßaller
Okay here is a better picture of what it looks like on the driverside. Remember, these are from raceconcepts.net. Front rotors are Brembo fully x-drilled/slotted, rears are EMC fully x-drilled/slotted.
What is your config like, please edit my pic and show me yours and if it is the proper way, or like Mtrai who said its okay.
Another stupid question, if its labeled LH I assume it means Left Hand side, so would that be Driver or Passenger side? Don't worry, I do know the difference in front or rear rotors, just not the sides.
Thanks,
ßaller, need info asap since I will be at mechanic tomorrow to adjust the wheel nut, so he can swap for me, thanks!
What is your config like, please edit my pic and show me yours and if it is the proper way, or like Mtrai who said its okay.
Another stupid question, if its labeled LH I assume it means Left Hand side, so would that be Driver or Passenger side? Don't worry, I do know the difference in front or rear rotors, just not the sides.
Thanks,
ßaller, need info asap since I will be at mechanic tomorrow to adjust the wheel nut, so he can swap for me, thanks!
Member who somehow became The President of The SE-L Club
iTrader: (19)
Joined: Jun 2001
Posts: 16,024
Left is the driver side. I believe you have them on backwards. Even my x-drilled which were labeled L & R face forward, not backwards like yours do. The swipe should be from top to bottom.
Originally posted by ßaller
Okay here is a better picture of what it looks like on the driverside. Remember, these are from raceconcepts.net. Front rotors are Brembo fully x-drilled/slotted, rears are EMC fully x-drilled/slotted.
What is your config like, please edit my pic and show me yours and if it is the proper way, or like Mtrai who said its okay.
Another stupid question, if its labeled LH I assume it means Left Hand side, so would that be Driver or Passenger side? Don't worry, I do know the difference in front or rear rotors, just not the sides.
Thanks,
ßaller, need info asap since I will be at mechanic tomorrow to adjust the wheel nut, so he can swap for me, thanks!
Okay here is a better picture of what it looks like on the driverside. Remember, these are from raceconcepts.net. Front rotors are Brembo fully x-drilled/slotted, rears are EMC fully x-drilled/slotted.
What is your config like, please edit my pic and show me yours and if it is the proper way, or like Mtrai who said its okay.
Another stupid question, if its labeled LH I assume it means Left Hand side, so would that be Driver or Passenger side? Don't worry, I do know the difference in front or rear rotors, just not the sides.
Thanks,
ßaller, need info asap since I will be at mechanic tomorrow to adjust the wheel nut, so he can swap for me, thanks!
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
trsandrew
7th Generation Maxima (2009-2015)
17
Apr 8, 2016 06:45 PM
magiconthetire
Audio and Electronics
2
Oct 26, 2015 09:03 PM
trsandrew
Group Deals / Sponsors Forum
2
Oct 25, 2015 02:47 PM