Autobahn Max

For those of you who have put MT-90 in your tranaxles, how did you get it in into the transaxle? The transaxles service point is in an ackward location, and as much as the MT-90 costs I don't want to spill that much of it. Any advice would be appreciated.

Jeff K

iTrader: (1)

Use some plastic tubing and run it from the top of the engine down to the fill hole. Add a oil funnel
to the top of the plastic hose and start pouring. It takes alittle more than 4 quarts. I give this suggestion
on my site in the 60K tuneup secton.