e-brake handle
#3
Moderator running more PSI than all the boosted Maximas... combined
iTrader: (5)
Join Date: Aug 2000
Posts: 6,345
Easy. Here is how->
Two ways to do it. Brut strength or with right tools.
Brut strength way: Yank on it hard towards the front of the car and it will come off.
With right tools: You will need a metal punch and a hammer.
Unbuckle the boot. You will see the plastic ebrake handle is covering the metal core. Place the metal punch against end part of the plastic ebrake handle part. Use the hammer to drive the plastic piece toward the front of the car. Two or three little taps and the OEM plastic ebrake handle will come off.
Brut strength way: Yank on it hard towards the front of the car and it will come off.
With right tools: You will need a metal punch and a hammer.
Unbuckle the boot. You will see the plastic ebrake handle is covering the metal core. Place the metal punch against end part of the plastic ebrake handle part. Use the hammer to drive the plastic piece toward the front of the car. Two or three little taps and the OEM plastic ebrake handle will come off.
Originally posted by tclee
my friend got one for $20 from local speed shop.
but is trying to take out the stock one...any ideas on how?
my friend got one for $20 from local speed shop.
but is trying to take out the stock one...any ideas on how?
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
08-15-2024 12:30 AM
thatcollegestudent
5th Generation Maxima (2000-2003)
18
10-05-2015 02:29 PM