Speed Limiter Removal is up!
Beware beware beware!!!! I do not know if this is illegal or not! Please do this at your own risk! Please!
How-2 Remove Speed Limiter
How-2 Remove Speed Limiter
Originally posted by NickStam
Beware beware beware!!!! I do not know if this is illegal or not! Please do this at your own risk! Please!
How-2 Remove Speed Limiter
Beware beware beware!!!! I do not know if this is illegal or not! Please do this at your own risk! Please!
How-2 Remove Speed Limiter
IF you have a five speed, you could place a reference table over the speedo. But why not just get a SE ECU. What's the point of having no speed limiter if you don't know how fast you're going?
this is only a temporary measure.. you know.. like if you have a trip and you are sick of getting your *** kicked 
its only temporary.. you can plug it back in real easily

its only temporary.. you can plug it back in real easily
Originally posted by medicsonic
IF you have a five speed, you could place a reference table over the speedo. But why not just get a SE ECU. What's the point of having no speed limiter if you don't know how fast you're going?
IF you have a five speed, you could place a reference table over the speedo. But why not just get a SE ECU. What's the point of having no speed limiter if you don't know how fast you're going?
awww damn.. don crashed the party


Originally posted by Don in Texas
There's no need to check your local laws to find out whether or not this is illegal, it is a FEDERAL law, so if you are in the US, it is illegal
Don
There's no need to check your local laws to find out whether or not this is illegal, it is a FEDERAL law, so if you are in the US, it is illegal

Don
Originally posted by NickStam
Beware beware beware!!!! I do not know if this is illegal or not! Please do this at your own risk! Please!
How-2 Remove Speed Limiter
Beware beware beware!!!! I do not know if this is illegal or not! Please do this at your own risk! Please!
How-2 Remove Speed Limiter
Ummmmmmmm ... k.. so I now have no speed limiter, but I also can't tell how fast I'm going.

Hopefully I'll have a friend nearby with a radar gun who can tell me ...
NickStam....
hey, can you make a write up over this installing a switch too in the dash somewhere. i think it would be great to have a switch to activate it. that way, if you doin a highway battle and you need to push your max a little harder, you can flip a switch and be on your way.....
Re: NickStam....
I thought about that.. but i decided i wasn't going to have anyone stripping wires and connecting it or anything like that..
Originally posted by _DRU_
hey, can you make a write up over this installing a switch too in the dash somewhere. i think it would be great to have a switch to activate it. that way, if you doin a highway battle and you need to push your max a little harder, you can flip a switch and be on your way.....
hey, can you make a write up over this installing a switch too in the dash somewhere. i think it would be great to have a switch to activate it. that way, if you doin a highway battle and you need to push your max a little harder, you can flip a switch and be on your way.....
yes... but it has to be the same year as your max
this is because you have a 98
this is because you have a 98
Originally posted by NickStam
Does swapping an SE ECU remove the limiter? Is it that easy?
Thanks for the reply Don. I didn't have a good feeling about the legality behind it.
Does swapping an SE ECU remove the limiter? Is it that easy?
Thanks for the reply Don. I didn't have a good feeling about the legality behind it.
Let's see if I have this straight...
I have a 97 GXE 5-speed, now if I am going to swap it with another ECU to remove the limiter I'm going to need to get a 97 SE ECU, But, does it need to be from a 5-speed??? Does an auto have different programming? Also, developing an on/off switch for the new wire removal way is something to look into.
I have a 97 GXE 5-speed, now if I am going to swap it with another ECU to remove the limiter I'm going to need to get a 97 SE ECU, But, does it need to be from a 5-speed??? Does an auto have different programming? Also, developing an on/off switch for the new wire removal way is something to look into.
Originally posted by BlkStnValyMaxima
Let's see if I have this straight...
I have a 97 GXE 5-speed, now if I am going to swap it with another ECU to remove the limiter I'm going to need to get a 97 SE ECU, But, does it need to be from a 5-speed??? Does an auto have different programming? Also, developing an on/off switch for the new wire removal way is something to look into.
Let's see if I have this straight...
I have a 97 GXE 5-speed, now if I am going to swap it with another ECU to remove the limiter I'm going to need to get a 97 SE ECU, But, does it need to be from a 5-speed??? Does an auto have different programming? Also, developing an on/off switch for the new wire removal way is something to look into.
then it must be a 5spd ECU
you have a 97 so you can also use a 96 or 95 5spd ECU
you have a 97 so you can also use a 96 or 95 5spd ECU
Originally posted by BlkStnValyMaxima
Let's see if I have this straight...
I have a 97 GXE 5-speed, now if I am going to swap it with another ECU to remove the limiter I'm going to need to get a 97 SE ECU, But, does it need to be from a 5-speed??? Does an auto have different programming? Also, developing an on/off switch for the new wire removal way is something to look into.
Let's see if I have this straight...
I have a 97 GXE 5-speed, now if I am going to swap it with another ECU to remove the limiter I'm going to need to get a 97 SE ECU, But, does it need to be from a 5-speed??? Does an auto have different programming? Also, developing an on/off switch for the new wire removal way is something to look into.
im looking into it
all thats required for the speedo to work is an electrical connection, so a typical electrical switch setup would work just fine i would think. im going to look into this tomorrow.... for that very rare instance when i feel a need to go over 118mph and risk death and/or imprisonment...
"do you know how fast you were going son?"
"no officer, i dont have a working speedometer"
heh i bet that would go over well...
Neal
96 GXE with a limiter
"do you know how fast you were going son?"
"no officer, i dont have a working speedometer"
heh i bet that would go over well...
Neal
96 GXE with a limiter
Re: just thought of something
No it doesn't
Originally posted by Nealoc187
i just thought of this... would this affect the odometer too? it would be a shame to buy a car that says it has 50K miles and it really has 100K....
Neal
i just thought of this... would this affect the odometer too? it would be a shame to buy a car that says it has 50K miles and it really has 100K....
Neal
If you get the ECU, it should be from the same year, must be the same transmission type and should be the same emission spec (Cali vs. Fed). I notice that everyone keeps leaving the third part out.
since you have a GLE-R does that mean you can use the 5spd SE ECU?

Originally posted by medicsonic
If you get the ECU, it should be from the same year, must be the same transmission type and should be the same emission spec (Cali vs. Fed). I notice that everyone keeps leaving the third part out.
If you get the ECU, it should be from the same year, must be the same transmission type and should be the same emission spec (Cali vs. Fed). I notice that everyone keeps leaving the third part out.
Guest
Posts: n/a
He also forgot to mention that your ECU light will come on as a failure, and the error was recorded into the ECU and next time ur car needs a check, the dealer hooks it up, it will see what happened.
Oh yeah, also people who did this on there 3rd gens, noticed a loss in power, most likely the ecu needs to know how fast your going,
Oh yeah, also people who did this on there 3rd gens, noticed a loss in power, most likely the ecu needs to know how fast your going,
i have gone 130 mph in my max... felt like i was floatin....scary **it... i do not plan on doing that again... and no... i didn't have the momos... i probably can't get past 110 with these suckers.... i need a y-pipe!!!!
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
Jan 2, 2024 09:23 AM




