Strut mounting?
#1
Strut mounting?
> Hi, i'm new here, and have a question about the way someone assembeled
the
> struts to the towers. I have a factory manual for my '84 Maxima wagon,
and
> it says there is "white paint" in one of the three studs that mount the
> strut to the tower, and that the white ones should be in the inside
> position, facing the engine, on either side. The white studs are in the
> rear positions on both sides! The manual states there is no adjustment
> available to the caster/camber, so what effect is this having on my car?
> Any help out there? Earl
the
> struts to the towers. I have a factory manual for my '84 Maxima wagon,
and
> it says there is "white paint" in one of the three studs that mount the
> strut to the tower, and that the white ones should be in the inside
> position, facing the engine, on either side. The white studs are in the
> rear positions on both sides! The manual states there is no adjustment
> available to the caster/camber, so what effect is this having on my car?
> Any help out there? Earl
#2
it just means that you cannot adjust the camber. I do not recall what the rear suspension for the 84 is, but my 3rd gen had a nice independent suspension, while my 4th gen has a multi-link rear beam.
If your tires do not wear irregularly, then you'll be fine.
Steve
If your tires do not wear irregularly, then you'll be fine.
Steve
#5
Strut mounting?
Originally Posted by slimer
it just means that you cannot adjust the camber. I do not recall what the rear suspension for the 84 is, but my 3rd gen had a nice independent suspension, while my 4th gen has a multi-link rear beam.
If your tires do not wear irregularly, then you'll be fine.
Steve
If your tires do not wear irregularly, then you'll be fine.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
11-01-2015 01:34 PM