Guess what i just got? Headers! Pics and info
#81
am i..
dreaming?!? lol. *pinch* nope *ouch*!! lmao. i need one of those now. lol. i really want to see what power it will give you too. looks really sweet man. one small step for man, one big leap for maxima kind. lol.good job. peace Brian
#82
Re: Bends on Ypipe
Originally posted by MikeO
I noticed from the pics that on the y-pipe the bends apprear to be crimp bend not mandrel. But hard to tell from pics. It might be better to keep the Stillen or Cattman y-pipe
I noticed from the pics that on the y-pipe the bends apprear to be crimp bend not mandrel. But hard to tell from pics. It might be better to keep the Stillen or Cattman y-pipe
#87
Originally posted by SprintMax
it looks to me like you are going to need an additional pipe after the flex section.. or did you not take pics of those?
it looks to me like you are going to need an additional pipe after the flex section.. or did you not take pics of those?
Dmb, I ment 2 hours all together, 1 hour of testing tomarrow{before the headers} and 1 hour next week{with the headers}.
#88
Originally posted by emax95
Dmb, I ment 2 hours all together, 1 hour of testing tomarrow{before the headers} and 1 hour next week{with the headers}.
Dmb, I ment 2 hours all together, 1 hour of testing tomarrow{before the headers} and 1 hour next week{with the headers}.
#89
Originally posted by dmbmaxima88
ya true, so they only bill in one hour increments?? that's bull. Where is the dyno, maybe we could split an hour, IF my car is ready for dyno. 30 minutes is enough for some pulls. just a thought IF my car is ready.
ya true, so they only bill in one hour increments?? that's bull. Where is the dyno, maybe we could split an hour, IF my car is ready for dyno. 30 minutes is enough for some pulls. just a thought IF my car is ready.
#90
Originally posted by emax95
The dyno is in Danielson CT, at thew Danielson Ford dealership. He said it takes him a 1/2 hour to setup and then I get 3 runs. I am going in at 4:30 today.
The dyno is in Danielson CT, at thew Danielson Ford dealership. He said it takes him a 1/2 hour to setup and then I get 3 runs. I am going in at 4:30 today.
Thanks allot Ethan, your efforts are appreciated. Dyno info for this is invaluable!
#91
.org dyno log
Their should really be some kind of .org dyno log. I think I asked Jamie about something like this a while ago, but I didn't get a responce.
It might work something like a list of mods on car in comparrison to HP/TQ ratings, accompanied by a dyno gif. This could be an interactive search based on component. Search for all dyno's with Y-pipe. Out comes a list of all Y-pipe dyno's, telling brand name and other mods along with car year, (maybe even humidity, bar pressure and temp for the day, blah, blah.
I know this isn't worked out. I just thought about it as I commented. Anybody else got any ideas?
It might work something like a list of mods on car in comparrison to HP/TQ ratings, accompanied by a dyno gif. This could be an interactive search based on component. Search for all dyno's with Y-pipe. Out comes a list of all Y-pipe dyno's, telling brand name and other mods along with car year, (maybe even humidity, bar pressure and temp for the day, blah, blah.
I know this isn't worked out. I just thought about it as I commented. Anybody else got any ideas?
#92
Originally posted by emax95
The dyno is in Danielson CT, at thew Danielson Ford dealership. He said it takes him a 1/2 hour to setup and then I get 3 runs. I am going in at 4:30 today.
The dyno is in Danielson CT, at thew Danielson Ford dealership. He said it takes him a 1/2 hour to setup and then I get 3 runs. I am going in at 4:30 today.
#93
dam .. $120 an hour to dyno ..
my cousins supra club goes to a place that charges $80 an hour and they even open on sunday just for them...
it's prolly too far from your house anyway ..
good luck E
Ant
my cousins supra club goes to a place that charges $80 an hour and they even open on sunday just for them...
it's prolly too far from your house anyway ..
good luck E
Ant
#94
Originally posted by Ant95se
dam .. $120 an hour to dyno ..
my cousins supra club goes to a place that charges $80 an hour and they even open on sunday just for them...
it's prolly too far from your house anyway ..
good luck E
Ant
dam .. $120 an hour to dyno ..
my cousins supra club goes to a place that charges $80 an hour and they even open on sunday just for them...
it's prolly too far from your house anyway ..
good luck E
Ant
#95
Originally posted by ejj5875
Yeah, but you gotta figure that your typical Supra driver does a lot more dyno's than a Maxima driver. I'm sure that guy is making a ton of money off their club!
Yeah, but you gotta figure that your typical Supra driver does a lot more dyno's than a Maxima driver. I'm sure that guy is making a ton of money off their club!
#100
Originally posted by emax95
Whats up guys, I just recieved my headers VIA fedex international! They look awesome and very well built. They came complete with all the gaskets and hardware plus a very informative installation enstruction print out. I even got a cool looking sticker . I will take pics in a few minutes, I have to run out to the store and get some AA bateries and then I will post the pics.
Whats up guys, I just recieved my headers VIA fedex international! They look awesome and very well built. They came complete with all the gaskets and hardware plus a very informative installation enstruction print out. I even got a cool looking sticker . I will take pics in a few minutes, I have to run out to the store and get some AA bateries and then I will post the pics.
#101
Originally posted by medicsonic
I can't believe I'M saying this, but could you keep the spam down?
I can't believe I'M saying this, but could you keep the spam down?
#102
Originally posted by dmbmaxima88
i'm sorry, but you say those guys at the dyno, even though they did your car perfectly.
i'm sorry, but you say those guys at the dyno, even though they did your car perfectly.
#103
Originally posted by SithMax
Okay, this post confuses me greatly. On an unrelated topical note: I can't wait to see these headers perform. I'll probably get them right after I do my suspension if they turn out to be worth it because after that I'd want to supercharge, and that's where the biggest gains would probably be found.
Okay, this post confuses me greatly. On an unrelated topical note: I can't wait to see these headers perform. I'll probably get them right after I do my suspension if they turn out to be worth it because after that I'd want to supercharge, and that's where the biggest gains would probably be found.
#104
Ethan-
When I was installing my Pacesetter shifter a few nights ago, I looked up under the car and checked out the rear manifold bank. Even with the engine cradle and front/rear engine mounts removed, there is no way you have access to all the nuts on the exhaust manifold. There is also no way of taking the manifold heatshield off either from underneath. I seriously believe you will have to remove the intake manifold to get to all the nuts and heatshield. Maybe there is something different about the engine compartment in the Eurpoean Cefiros. I remember GuidoSST telling me that the Cefiros have a different firewall that is pushed back a little farther to make room for the VQ30DET (turbo). The space between the manifold and firewall on the US Maxima is about nill. Even with a wild set of sockets and swivels, you don't have the room to work. You should really get underneath your car to see what I'm talking about. You might want to get in touch with Don since he's already removed the front and rear manifolds.
Dave
When I was installing my Pacesetter shifter a few nights ago, I looked up under the car and checked out the rear manifold bank. Even with the engine cradle and front/rear engine mounts removed, there is no way you have access to all the nuts on the exhaust manifold. There is also no way of taking the manifold heatshield off either from underneath. I seriously believe you will have to remove the intake manifold to get to all the nuts and heatshield. Maybe there is something different about the engine compartment in the Eurpoean Cefiros. I remember GuidoSST telling me that the Cefiros have a different firewall that is pushed back a little farther to make room for the VQ30DET (turbo). The space between the manifold and firewall on the US Maxima is about nill. Even with a wild set of sockets and swivels, you don't have the room to work. You should really get underneath your car to see what I'm talking about. You might want to get in touch with Don since he's already removed the front and rear manifolds.
Dave
#105
Originally posted by Dave B
Ethan-
When I was installing my Pacesetter shifter a few nights ago, I looked up under the car and checked out the rear manifold bank. Even with the engine cradle and front/rear engine mounts removed, there is no way you have access to all the nuts on the exhaust manifold. There is also no way of taking the manifold heatshield off either from underneath. I seriously believe you will have to remove the intake manifold to get to all the nuts and heatshield. Maybe there is something different about the engine compartment in the Eurpoean Cefiros. I remember GuidoSST telling me that the Cefiros have a different firewall that is pushed back a little farther to make room for the VQ30DET (turbo). The space between the manifold and firewall on the US Maxima is about nill. Even with a wild set of sockets and swivels, you don't have the room to work. You should really get underneath your car to see what I'm talking about. You might want to get in touch with Don since he's already removed the front and rear manifolds.
Dave
Ethan-
When I was installing my Pacesetter shifter a few nights ago, I looked up under the car and checked out the rear manifold bank. Even with the engine cradle and front/rear engine mounts removed, there is no way you have access to all the nuts on the exhaust manifold. There is also no way of taking the manifold heatshield off either from underneath. I seriously believe you will have to remove the intake manifold to get to all the nuts and heatshield. Maybe there is something different about the engine compartment in the Eurpoean Cefiros. I remember GuidoSST telling me that the Cefiros have a different firewall that is pushed back a little farther to make room for the VQ30DET (turbo). The space between the manifold and firewall on the US Maxima is about nill. Even with a wild set of sockets and swivels, you don't have the room to work. You should really get underneath your car to see what I'm talking about. You might want to get in touch with Don since he's already removed the front and rear manifolds.
Dave
#106
Originally posted by Dave B
Ethan-
When I was installing my Pacesetter shifter a few nights ago, I looked up under the car and checked out the rear manifold bank. Even with the engine cradle and front/rear engine mounts removed, there is no way you have access to all the nuts on the exhaust manifold. There is also no way of taking the manifold heatshield off either from underneath. I seriously believe you will have to remove the intake manifold to get to all the nuts and heatshield. Maybe there is something different about the engine compartment in the Eurpoean Cefiros. I remember GuidoSST telling me that the Cefiros have a different firewall that is pushed back a little farther to make room for the VQ30DET (turbo). The space between the manifold and firewall on the US Maxima is about nill. Even with a wild set of sockets and swivels, you don't have the room to work. You should really get underneath your car to see what I'm talking about. You might want to get in touch with Don since he's already removed the front and rear manifolds.
Dave
Ethan-
When I was installing my Pacesetter shifter a few nights ago, I looked up under the car and checked out the rear manifold bank. Even with the engine cradle and front/rear engine mounts removed, there is no way you have access to all the nuts on the exhaust manifold. There is also no way of taking the manifold heatshield off either from underneath. I seriously believe you will have to remove the intake manifold to get to all the nuts and heatshield. Maybe there is something different about the engine compartment in the Eurpoean Cefiros. I remember GuidoSST telling me that the Cefiros have a different firewall that is pushed back a little farther to make room for the VQ30DET (turbo). The space between the manifold and firewall on the US Maxima is about nill. Even with a wild set of sockets and swivels, you don't have the room to work. You should really get underneath your car to see what I'm talking about. You might want to get in touch with Don since he's already removed the front and rear manifolds.
Dave
Tuesday..
#107
Originally posted by emax95
My mechanic seems to know exactly what to do so I am not going to worry about it.
My mechanic seems to know exactly what to do so I am not going to worry about it.
Because the is is will be a biatch to do. I pondered it today when I was under my car doing the motor swap, an its tight on the back side for sure!
#109
i don't know how he's gonna change it without lifting the engine but more power to him, how much is he gonna charge you. if they fit they are on my list and i need someone to put them on for me.
#110
Originally posted by dmbmaxima88
i don't know how he's gonna change it without lifting the engine but more power to him, how much is he gonna charge you. if they fit they are on my list and i need someone to put them on for me.
i don't know how he's gonna change it without lifting the engine but more power to him, how much is he gonna charge you. if they fit they are on my list and i need someone to put them on for me.
I was bored so I just removed the front heat shield . To bad the folks are sleaping or other wise I whould be getting mid evil on the car right now, lol.
BTW the front header looks pretty easy to take off.
#111
Originally posted by emax95
I have never heard that you have to lift the engine? Worse case scenerio is the intake manifold will have to come off. I think I am going to take my Y-Pipe and front header off tomarrow to make the job a little easier for my mechainic. There is a slim chance I might just go ahead and do the whole job myself, but that is unlikely.
I was bored so I just removed the front heat shield . To bad the folks are sleaping or other wise I whould be getting mid evil on the car right now, lol.
BTW the front header looks pretty easy to take off.
I have never heard that you have to lift the engine? Worse case scenerio is the intake manifold will have to come off. I think I am going to take my Y-Pipe and front header off tomarrow to make the job a little easier for my mechainic. There is a slim chance I might just go ahead and do the whole job myself, but that is unlikely.
I was bored so I just removed the front heat shield . To bad the folks are sleaping or other wise I whould be getting mid evil on the car right now, lol.
BTW the front header looks pretty easy to take off.
have fun, if you dont mind me asking, how much is he gonna charge you and how are you gonna get the car there in that condition, tow it?
#112
Originally posted by dmbmaxima88
have fun, if you dont mind me asking, how much is he gonna charge you and how are you gonna get the car there in that condition, tow it?
have fun, if you dont mind me asking, how much is he gonna charge you and how are you gonna get the car there in that condition, tow it?
As for towing the car there? Why do you say that? If I take my Y-Pipe off and front header and then put on my PPC front header, I don't see a problem with me driving the car. The only thing missing will be the Y-Pipe.
#113
Originally posted by emax95
I was bored so I just removed the front heat shield . To bad the folks are sleaping or other wise I whould be getting mid evil on the car right now, lol.
BTW the front header looks pretty easy to take off.
I was bored so I just removed the front heat shield . To bad the folks are sleaping or other wise I whould be getting mid evil on the car right now, lol.
BTW the front header looks pretty easy to take off.
Dave
#114
Originally posted by emax95
I got a hook up with my mechanic. The guy always gives me killer deal, Like $25-30 a hour. I figure the install will land in the $200 range.
As for towing the car there? Why do you say that? If I take my Y-Pipe off and front header and then put on my PPC front header, I don't see a problem with me driving the car. The only thing missing will be the Y-Pipe.
I got a hook up with my mechanic. The guy always gives me killer deal, Like $25-30 a hour. I figure the install will land in the $200 range.
As for towing the car there? Why do you say that? If I take my Y-Pipe off and front header and then put on my PPC front header, I don't see a problem with me driving the car. The only thing missing will be the Y-Pipe.
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
01-02-2024 09:23 AM
tv314
7th Generation Classifieds (2009-2015)
5
04-05-2016 04:54 PM
Derrick2k2SE
5th Generation Maxima (2000-2003)
9
11-19-2015 10:14 PM