Gear Shift knob question
Gear Shift **** question
Ok I read up on the previous posts regarding automatic gear shift ***** and I just want to make sure that I understand my options.
I have a 5.5 gen Max. I don't have an overdrive button on my automatic gear shift ****. See Below:

I would like to see about having my current **** resprayed but only if it's cost effective and safe.
Since I don't have to worry about a overdrive button, can I also use unmarked manual stick shift ***** that may fit my decor better than the stock one?

This is one of the automatic ***** I am looking at:

Thanks
I have a 5.5 gen Max. I don't have an overdrive button on my automatic gear shift ****. See Below:

I would like to see about having my current **** resprayed but only if it's cost effective and safe.
Since I don't have to worry about a overdrive button, can I also use unmarked manual stick shift ***** that may fit my decor better than the stock one?

This is one of the automatic ***** I am looking at:

Thanks
Last edited by Mr. Wet; Apr 10, 2009 at 10:30 AM.
yea they do. just buy a manual ****. the stock **** is on WAY too tight and they use an adhesive, so its hard to take off bare handed, so wrap a towel around it and use vicegrips or channel locks to twist it off
Please tell me it's true!!! There were a couple of manual ***** that I really liked such as the one below:

It looks pretty similar to my stock ****. Any reason why I shouldn't give this one a try?
Last edited by Mr. Wet; Apr 20, 2009 at 09:10 PM.
I have one in my garage, brand new, I think from an Infiniti M. It looks much like your OEM **** but black leather (silver bottom). I'd be happy to sell it if you want. I ended up not using it.

Hehe.. Believe it or not Kev, I just reached 61k on it yesterday..lol!
I used to drive sticks all the time I do push the car hard at times. My right hand is always on the stick shift mind you.
It's an eye soar because the rest of the interior is mint..smh!
Last edited by Mr. Wet; Apr 28, 2009 at 08:30 AM.
Enjoy.
http://forums.maxima.org/detailing/2...ic-eraser.html
Hey Kev. I don't know if you know about this or not but I am going to let you in on what I use to keep my interior looking like it does. I found this link on this great forum and have never looked back.
Enjoy.
http://forums.maxima.org/detailing/2...ic-eraser.html
Enjoy.
http://forums.maxima.org/detailing/2...ic-eraser.html
I use maguires cleaner/conditioner and it works great. leaves me with a new car smell, too.
I'm sure the Mr. Clean things can clean hundreds of other stuff though, so good lookin' out. I hadn't heard of them before.
comments like these make me nervous. I didn't go through the whole thread, so there may be some success stories with black interiors.
I use maguires cleaner/conditioner and it works great. leaves me with a new car smell, too.
I'm sure the Mr. Clean things can clean hundreds of other stuff though, so good lookin' out. I hadn't heard of them before.
I use maguires cleaner/conditioner and it works great. leaves me with a new car smell, too.
I'm sure the Mr. Clean things can clean hundreds of other stuff though, so good lookin' out. I hadn't heard of them before.
I'm going to look into it a little more but I have never had a problem with it. Then again, my leather isn't black either.
Oh, Mr. Wet, I have one of these ***** too. But it's black/chrome like erty's. Brand new, unused. I'd be willing to sell it.

But I don't think you want one because you don't need the OD button like the 4th gens do, right?

But I don't think you want one because you don't need the OD button like the 4th gens do, right?
Thanks to everyone who responded. In regards to the shift ****, I really would like to have wood in the finish of my shift ****.
I coincidentally am cleaning out my garage this weekend. I found the Levoc shift **** we were talking about, I found the black stitched leather over silver Infiniti **** I told you guys about and I found another **** I totally forgot about. It's all wood. I bought it for my 1990 Audi 100 over 10 years ago. It was very hard to track down because I wanted Zebrano wood to match the rest of the Audi's interior. I think it's meant for a Mercedes. I'd be happy to sell it to you cheap Mr. Wet but I am guessing you won't want it since the striped Zebrano wood doesn't match your darker marble wood. Here's a picture of all three *****:

erty, I couldn’t find my receipt for the Levoc **** but check this out, it looks like there is a guy on e-bay selling one for $29 shipped! That's a heck of a deal. I can't remember what I paid for mine but I'm thinking somewhere between $50 and $100. Mr. Wet, you might try contacting him because he does say he has white and CF as well as black. So there's a chance he can get wood. Good luck guys.

erty, I couldn’t find my receipt for the Levoc **** but check this out, it looks like there is a guy on e-bay selling one for $29 shipped! That's a heck of a deal. I can't remember what I paid for mine but I'm thinking somewhere between $50 and $100. Mr. Wet, you might try contacting him because he does say he has white and CF as well as black. So there's a chance he can get wood. Good luck guys.
erty, I couldn’t find my receipt for the Levoc **** but check this out, it looks like there is a guy on e-bay selling one for $29 shipped! That's a heck of a deal. I can't remember what I paid for mine but I'm thinking somewhere between $50 and $100. Mr. Wet, you might try contacting him because he does say he has white and CF as well as black. So there's a chance he can get wood. Good luck guys.
Thread
Thread Starter
Forum
Replies
Last Post
sctludwig
3rd Generation Maxima (1989-1994)
8
Sep 1, 2022 01:32 PM
hez8813
5th Generation Maxima (2000-2003)
11
Mar 12, 2020 12:06 AM





