Painted Valve Cover...
#3
i think it s a valve cover could be wrong...
http://www.cyberhosts.net/~gotrice/m...cmeet00/24.jpg
like this one is lime green.....
like this one is lime green.....
#5
High temp paint for the
spark cover. If you want the letter to show either put tape over the letter or naval jelly.
Take the cover off the engine.
Mask letters...up to you
Spray with high temp paint(Home Depot)
Re-install
Finished product:
<IMG SRC=http://integra.vtec.net/geeser/megamax/images/new/motor_painted_wirecover.jpg>
Take the cover off the engine.
Mask letters...up to you
Spray with high temp paint(Home Depot)
Re-install
Finished product:
<IMG SRC=http://integra.vtec.net/geeser/megamax/images/new/motor_painted_wirecover.jpg>
#9
I'm going to paint mines blue. The thing is I want to cover up the letters. How do I go about it? Using tape to cover them? And then I guess you a razor/knife to trim? Seem like it would be a long process. Maybe I should just chrome it, or polish it.
#12
very easy job...
Remove from engine, place a peice of masking tape over the strip that has the Nissan symbol, and spray. Probably nothing that wasn't said in some of these posts, but hey, just thought I would get in on the action
<img src="http://www.gofishguys.com/images/andy/engine1.jpg" border=0>
<img src="http://www.gofishguys.com/images/andy/engine1.jpg" border=0>
#13
Supporting Maxima.org Member
iTrader: (11)
Join Date: Aug 2000
Location: New Windsor, NY
Posts: 2,799
Originally posted by doug
whats that..
whats that..
#15
What color ....
what color should I paint it though....is there like a team color like with dirtbikes...honda..red ect....or jsut go with a theme I pick......or has anyone found a color that just went perfect....definitally not lime green...sorry....
#16
Guest
Posts: n/a
Cumalot
Originally posted by Cumalot
I'm going to paint mines blue. The thing is I want to cover up the letters. How do I go about it? Using tape to cover them? And then I guess you a razor/knife to trim? Seem like it would be a long process. Maybe I should just chrome it, or polish it.
I'm going to paint mines blue. The thing is I want to cover up the letters. How do I go about it? Using tape to cover them? And then I guess you a razor/knife to trim? Seem like it would be a long process. Maybe I should just chrome it, or polish it.
#17
Re: What color ....
Originally posted by Dahnryman
what color should I paint it though....is there like a team color like with dirtbikes...honda..red ect....or jsut go with a theme I pick......or has anyone found a color that just went perfect....definitally not lime green...sorry....
what color should I paint it though....is there like a team color like with dirtbikes...honda..red ect....or jsut go with a theme I pick......or has anyone found a color that just went perfect....definitally not lime green...sorry....
#18
Re: No...this is beautiful
[QUOTE]Originally posted by Jeff K
[QUOTE]Originally posted by doug thats beautiful jeff
My masterpiece...
<IMG SRC=http://integra.vtec.net/geeser/megamax/images/Megamax_engine.jpg>
Jeff, how much did it cost you to polish your engine like that. How much was each individual part? It looks sweet!! For the valve cover, I used FoliaTec red caliper paint since I painted my calipers red and had a lot of paint left over. Sorry, I don't have a pic.
[QUOTE]Originally posted by doug thats beautiful jeff
My masterpiece...
<IMG SRC=http://integra.vtec.net/geeser/megamax/images/Megamax_engine.jpg>
#21
Re: Cumalot
Originally posted by Eman97SE
Most hobby shops have this stuff that is used to cover up decals on models etc... It's in a small nail polish sized bottle. Anyway, you dab this stuff over the letters you want to protect, and after it dries, you can spray paint the rest. Once the paint is dry, you just go back and peal this stuff off... alot easier than taping and cutting!
Originally posted by Cumalot
I'm going to paint mines blue. The thing is I want to cover up the letters. How do I go about it? Using tape to cover them? And then I guess you a razor/knife to trim? Seem like it would be a long process. Maybe I should just chrome it, or polish it.
I'm going to paint mines blue. The thing is I want to cover up the letters. How do I go about it? Using tape to cover them? And then I guess you a razor/knife to trim? Seem like it would be a long process. Maybe I should just chrome it, or polish it.
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
08-15-2024 12:30 AM
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
TKHanson
5th Generation Maxima (2000-2003)
6
11-24-2018 01:39 AM
tseng1023
5th Generation Classifieds (2000-2003)
3
10-15-2015 08:30 AM