got my Ypipe back problem solved 0803 code gone, if ur S/Ced you may want to read
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
got my Ypipe back problem solved 0803 code gone, if ur S/Ced you may want to read
Everyone knows I been having problems tunning my S/Cer etc...well today I finally got my Y pipe back after I picked it up from New Orleans school district UPS the st!pid f!cks delivered it there and then blamed it on Cattman but he got my address correct.
Anyways everytime I was going to the track my car was slow, my best time so far has been 14.5, these are the problems I was having due to a damaged Ypipe..
1. My EGT gauge was hitting 800 degrees celsius very fast so I thought I was running lean.
2. My egine was very loud and noisy, after swapping to my stock pipe the noise went away.
3. I was getting the 0803 code Absolute manifold pressure or
circuit something like that... as I hit 10PSI.
4. My exhaust all of a sudden quiet down completely before it was very loud since I have a Greddy.
5. My engine bay was very very hot after I drive my car normally for
6 blocks or so, and thats with the stock Ypipe as well.
Now I am hitting 10PSI in 2nd gear before only about 5 or 6, also the car feels so much smoother. I dont get the engine light after hitting 10PSI tonight after going on a test run. Engine bay is not hot like it usually gets. I am no thermometer but I know what a hotter then normal engine bay feels like. It also dropped the EGT Temperature to like 700 degrees celsius something like that. So if your having serious problems with your car even if its not supercharged dont pay a couple of hundred dollars tunning your car when it can just be air restriction due to a damaged flex section.
just though I share this information with everyone
I think I am ready for high 13s now the car feels very fast!!!
Anyways everytime I was going to the track my car was slow, my best time so far has been 14.5, these are the problems I was having due to a damaged Ypipe..
1. My EGT gauge was hitting 800 degrees celsius very fast so I thought I was running lean.
2. My egine was very loud and noisy, after swapping to my stock pipe the noise went away.
3. I was getting the 0803 code Absolute manifold pressure or
circuit something like that... as I hit 10PSI.
4. My exhaust all of a sudden quiet down completely before it was very loud since I have a Greddy.
5. My engine bay was very very hot after I drive my car normally for
6 blocks or so, and thats with the stock Ypipe as well.
Now I am hitting 10PSI in 2nd gear before only about 5 or 6, also the car feels so much smoother. I dont get the engine light after hitting 10PSI tonight after going on a test run. Engine bay is not hot like it usually gets. I am no thermometer but I know what a hotter then normal engine bay feels like. It also dropped the EGT Temperature to like 700 degrees celsius something like that. So if your having serious problems with your car even if its not supercharged dont pay a couple of hundred dollars tunning your car when it can just be air restriction due to a damaged flex section.
just though I share this information with everyone
I think I am ready for high 13s now the car feels very fast!!!
#3
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by bags533
hurry up and get here so we can find out
hurry up and get here so we can find out
#4
Re: got my Ypipe back problem solved 0803 code gone, if ur S/Ced you may want to read
Originally posted by JAY25
Everyone knows I been having problems tunning my S/Cer etc...well today I finally got my Y pipe back after I picked it up from New Orleans school district UPS the st!pid f!cks delivered it there and then blamed it on Cattman but he got my address correct.
Everyone knows I been having problems tunning my S/Cer etc...well today I finally got my Y pipe back after I picked it up from New Orleans school district UPS the st!pid f!cks delivered it there and then blamed it on Cattman but he got my address correct.
#6
Re: got my Ypipe back problem solved 0803 code gone, if ur S/Ced you may want to read
Originally posted by JAY25
I think I am ready for high 13s now the car feels very fast!!!
I think I am ready for high 13s now the car feels very fast!!!
#7
Supporting Maxima.org Member
Thread Starter
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Re: Re: got my Ypipe back problem solved 0803 code gone, if ur S/Ced you may want to read
Originally posted by MardiGrasMax
Oh yea? We can go out and test this sometime
Oh yea? We can go out and test this sometime
Mike I will hopefully try to leave Monday, the tirerack said my stuff is suppose to be delivered tomorrow and same thing with the tires. I will be close to Manhattan today I have a luncheon with my work section. It will be at the Mandarin something off of Lapalco.
Matt we can try to test this out as soon as you get a chance you tell me when and I can come by your place and you can drive for yourself that the car indeed feels normal. Last night I went out to try to race it just for fun but no fast cars the Hondas want to
play but I dont want to pick on now slow car.
#8
Jaime, as I was about to get off the Manhattan exit coming home from school, I saw a blue WRX with exhaust flying by. I thought if Jaime was here, he would probably have gave chase...lol.
Thread
Thread Starter
Forum
Replies
Last Post
CorollaULEV
7th Generation Maxima (2009-2015)
30
08-09-2021 08:11 PM
yat70458
5th Generation Maxima (2000-2003)
2
08-03-2015 01:16 PM