Adding brake products onto my website, I'm extending special pricing for all brake pads until *edit*October 31st, 2003*edit*.

EBC Green Stuff
Front: $67.50/pair (Reg: $72.50)
Rear: N/A

Hawk HPS Pads
Front: $62.00/pair (Reg: $67.50)
Rear: N/A

Hawk HPS Pads (Direct Replacement for Stillen Big Brake Kit)
$130.00 Special Order

Hawk HPS Pads (Direct Replacement for Wilwood Big Brake Kit)
$130.00 Special Order

Axxis MetalMaster Pads
Front: $51.99 (Reg: $57.50)
Rear: $45.00 (Reg: $47.50)

Raybestos Quietstop (Quietstop rear pads not made for 92-94 Max)
Front: $39.99 (Reg: $42.50)
Rear: $42.00 (Reg: $45.50)

UPS Ground shipping cost ranges bet. $5-8 (depending on where you are located).
Mastercard/Visa accepted.
Orders through PayPal must add 2.9%+ .30 cents to cover PayPal Service Fee. PayPal Acct: asiaducati@yahoo.com
Cash/MO accepted. Pickup for NY/NJ orders are welcome.

Any questions, please post here or call to place your order.

Ange
646-321-9779
ange@redlinemax.com

 

my wilwoods dust like a ****. do you know who else makes pads for them?

 

Hi Jeff- I've gotten Hawk HPS brakepads for Wilwood application (for Mitch33x on the .org). Considerably less dusting, quiet and performs great. There is Hawk HP+ version available too, for autocross/track purposes.

Wilwood application:
$130/set for Hawk HPS
$155/set for Hawk HP+

Ange

 

hmmm... I think you may be getting another phone call real soon

 

no Porterfield R4-S Brake Pads?

 

No Portofeels... those were my first set of replacement pads when I swapped out my OE ones. Though they are great pads, I hated cleaning all the brakedust. I still have Porterfield rear pads on the Max.

Hawk HPS is just about as great as those Porterfield pads at 40% cheaper.

Ange

 

is this for 5th gen as well? if so those raybestos QS you sell for rear will fit a 5th gen?

p.s. i think the model# should be PGD540QS

 

What about Axxis Ultimate?

 

http://forums.maxima.org/showthread.php?t=244599

 

Yes, discount pricing apply to 3rd and 5th gen Maximas, Infinitis as well.
Email or call for availability of pads for a specific application.
PS- I'm not offering discount on Ultimates since Soundmike is conducting a groupdeal for those right now.

AnGe
asiaducati@yahoo.com
646-321-9779

 

Hi, I currently have Axxis Metal Master front and rear with Dimpled - Slotted rotor, my front brake cant probably hold for another week or two, the rear one are still very good until next summer. The Axxis are good pads but a little rough and dusty, would you suggest to replace with the Hawk ? Let me know asap cuz I need to order like yesterday I dont want to shot the rotors.

Cheers


AA

 

2 questions:
Do the raybestos have the holes for the pins/wire things that keept the pads of the rotors?
Has anyone experienced noise from the raybestos?

i was thinking about going oem but i hate to buy anything from the dealer. im worried about noise from the pads.
also do you need to resurface or do anything else to your rotors when you put on new pads?(i put on brembo oem replacements about 6 months ago)

if they raybestos are cheaper than oem and meet my requirements im in.

thanks

 

Hi- I've been using Hawk HPS pads on my front (Stillen Big Brakes) and they are excellent. I highly recommend them.

 

I haven't had any customers complain about Raybestos QS pads.. good product for the money.

I haven't seen the condition of your rotors, nor am I a mechanic. I can't tell you if you're in need of resurfacing your rotors.


As I've mentioned on prior post, I believe you can reuse the stock shimkit (the pins/wire thing you're talking about).

Ange

 

thanks for the info

 

hey. what do you have for front and rear rotors?? don't want any crazy dimpled/slotted/cross drilled ones...just plain ones,,,like ray's

thanks

 

your pads are here. check your email.

Ange

 

Looking to order the following for my 2002 Maxima:

Front: Hawk HPS pads

Rear: Axxis MetalMaster

Please contact me with shipping charges included (zip 60085). I intend to pay for this using M/O.

 

I tried to email you at dunn.v@attbi.com but that account is no good. Here's the info you need:

Hawk HPS Front Pads $62.00
Axxis MetalMaster Rear Pads $45.00
UPS Shipping to IL (Zip: 60085) is $11.50

Total: $118.50

Please remit payment (Money Order) payable to Angela Liu
Initial D Auto Salon
ATTN: Angela Liu
8671 18th Ave,
Brooklyn, NY 11214

No we do not carry shim kits, you may either reuse your stock shims, or purchase that from your local Nissan dealership. You order will be shipped out within 48 hours upon receipt of your payment.

Angela Liu
646-321-9779

 

I originally had the Wilwood Q series pads, (pads that come with the kit) and they dusted like a **** on crack

Ange got me some Hawk HPS, I like them a lot so far, much less dust.

Thanks Ange

 

Looking to order the following for my 2002 Maxima:

Front: Hawk HPS pads

Rear: Axxis MetalMaster

Please contact me with shipping charges included (zip 93727). I intend to pay for this using my VISA card.

 

Please call 646-321-9779 to place your order.

Sincerely,
AnGe

 

Can you get the pads for the 300zx TT brakes (front z32 mod) ?
I have the Axxis now (they have lasted 1 year)...do you recommend something else.

 

Hey ange,
Do you have the metal masters for a 2k2????
Thanks
Billy

 

Hi Billy-
Yes I do. Will confirm that with the distributor shortly.


Latinmax- I will need to get in touch with Hawk to see if they make brakepad application for the z-brakes.

Ange

 

Thanks for the pads Ange! Maybe one day I will get to meet you in person

 

Hawk part # for 300 ZX is HB-178.564

FMSI # is 7340 D647

I got a Hawk catalog

 

Price is $130, the same as Stillen or Wilwood application

Ange
646-321-9779

 

Angie, please verifythat Axxis MetalMaster REAR pads are available for a 2002 Maxima. There is discussion going around that Axxis does not make rear pads for 2002 Maximas.

 

No Axxis pads for the rear. Best that you go with Raybestos Quietstop pads for the rear.

Ange

 

Dernit.......why cant these places get on the ball....sheesh. SUCH a PITA.

I'll be getting ahold of you later ange when I finally decide which ones I want!!!!!

 

Is the deal for 3rd gen pads still on?

 

yes, the deal is good until Oct. 15th.

Phone: 646-321-9779
PayPal: paypal@redlinemax.com

AnGe

 

I have a 2000 Maxima and it needs brakes and the dealer and midas both want outrageous prices. the car has 40K on it and supposedly the rear pads are almost toast and the fronts are 1/2 gone. They want to install new pads all around and resurface all the rotors. Now after telling you my entire life story, the reason I'm writing is because it seems that I can get new rotors and pads for about the same as they want to put **** on my car. How much would it cost for good rotors and pads for my car? I'm not looking for looks, I just want it to stop safely. I appreciate the time and I hope we can do some buisness.

 

Yes, you've got the correct part number. It works for 5th gen.

AnGe
BTW- I've extended the discount til end of the October!

 

for rotors go to tirerack.com, i got brembo oem replacements all four for 218 shipped, arrived in two days and they are fantastic(you can also say you have brembos)

on a side note i recieved my pads in less than a week from this deal(rabestos quiet stops) and have since installed the front pads, they are completely silent and have also eliminated the groaning noise i used to get when coming to a stop. they perform much better than the oem pads as i had no fade running through the hills around fall creek falls state park TN last week.

Thanks Ange

 

Good deal!

 

Ange,
You have PM