GD Zinc plated Brembo Rotors, Axxis MM pads & SS lines *Early Xmas sale*
#82
Originally Posted by cardana24
can you get a full set of x-drilled and slotted for a 93 Z 2+2 non turbo?...if so I would like to get a set...please let me know, I need them asap.
for 2k rotors, we still have some left
same for 2k1 everything is still aviable
2k2's pads, and rotor is not included in the specials
thanks
jason
#83
Originally Posted by AuToMaX_95
Yes i can still get them
for 2k rotors, we still have some left
same for 2k1 everything is still aviable
2k2's pads, and rotor is not included in the specials
thanks
jason
for 2k rotors, we still have some left
same for 2k1 everything is still aviable
2k2's pads, and rotor is not included in the specials
thanks
jason
#85
Originally Posted by aznsap
can i get a price quote for:
2 brembo blank rotors for the rear of a '95 maxima
shipped to 61265. thanks.
2 brembo blank rotors for the rear of a '95 maxima
shipped to 61265. thanks.
Specials are end now all price are back to normal
thanks =)
aznsap you got p.m
#86
For some reason i can't edit my post so here is the price brake down
$100 for Front rotors, Dimpled, slotted, dimpled/slotted cross drill, cross drill/slotted
$100 for rear same thing.
$44 for Brembo blanks each $88 for pair zinc plated
$44 for brembo blanks rear each $88 for pair zinc plated
$35 for Axxis MM/PBR pads Front
$35 for Axxis MM/PBR pads rear
$85 SS lines F/R Technofit (company own by the vice presdent of Goodridge)
everything for year 89-01 maxima
02-03 Is still in process, rougly next week another GD will be up for 02-03 maxima only.
I know i been posting about 02-03 for a while now, but surly next week GD will be up
thanks
jason
$100 for Front rotors, Dimpled, slotted, dimpled/slotted cross drill, cross drill/slotted
$100 for rear same thing.
$44 for Brembo blanks each $88 for pair zinc plated
$44 for brembo blanks rear each $88 for pair zinc plated
$35 for Axxis MM/PBR pads Front
$35 for Axxis MM/PBR pads rear
$85 SS lines F/R Technofit (company own by the vice presdent of Goodridge)
everything for year 89-01 maxima
02-03 Is still in process, rougly next week another GD will be up for 02-03 maxima only.
I know i been posting about 02-03 for a while now, but surly next week GD will be up
thanks
jason
#87
Originally Posted by AuToMaX_95
For some reason i can't edit my post so here is the price brake down
$100 for Front rotors, Dimpled, slotted, dimpled/slotted cross drill, cross drill/slotted
$100 for rear same thing.
$44 for Brembo blanks each $88 for pair zinc plated
$44 for brembo blanks rear each $88 for pair zinc plated
$35 for Axxis MM/PBR pads Front
$35 for Axxis MM/PBR pads rear
$85 SS lines F/R Technofit (company own by the vice presdent of Goodridge)
everything for year 89-01 maxima
02-03 Is still in process, rougly next week another GD will be up for 02-03 maxima only.
I know i been posting about 02-03 for a while now, but surly next week GD will be up
thanks
jason
$100 for Front rotors, Dimpled, slotted, dimpled/slotted cross drill, cross drill/slotted
$100 for rear same thing.
$44 for Brembo blanks each $88 for pair zinc plated
$44 for brembo blanks rear each $88 for pair zinc plated
$35 for Axxis MM/PBR pads Front
$35 for Axxis MM/PBR pads rear
$85 SS lines F/R Technofit (company own by the vice presdent of Goodridge)
everything for year 89-01 maxima
02-03 Is still in process, rougly next week another GD will be up for 02-03 maxima only.
I know i been posting about 02-03 for a while now, but surly next week GD will be up
thanks
jason
YGPM.
-Jason
#91
Originally Posted by Conrad283
Hey Jason, do you have any pics of what the dimpled rotors look like? And do you still have the rotors available in slotted or slotted/dimpled?
I should have them on my homepage, you can check it out.
yes I still have everything aviable. Only the price is adjusted.
Dark Lord Bunny
you got p.m
thanks
jason
#95
Originally Posted by aussie983
Hey, i just happen to be in need of some new rotors since my old ones were warping badly.
Just wondering if you have any more 2k brembo blanks and pads?
Just wondering if you have any more 2k brembo blanks and pads?
#98
Originally Posted by twllin
I might need the whole set too
Probly in a month, right now everything is short on supply. Your are lucky if you even can get a pair at $100 which is a helllla good price =) once we ran out is out. We heard from a insider that brembo is going to jack up the price later for like $5 extra for each rotor, but his not sure when will it happen.
jason
#99
Originally Posted by AuToMaX_95
Probly in a month, right now everything is short on supply. Your are lucky if you even can get a pair at $100 which is a helllla good price =) once we ran out is out. We heard from a insider that brembo is going to jack up the price later for like $5 extra for each rotor, but his not sure when will it happen.
jason
jason
btw guys I have one last set for 2000-2001 rotor BREMBO.
1995-1999 we have 6 set left BREMBO
and one set of 1989-1994 brembo left.
jason
#100
Originally Posted by AuToMaX_95
btw guys I have one last set for 2000-2001 rotor BREMBO.
1995-1999 we have 6 set left BREMBO
and one set of 1989-1994 brembo left.
jason
1995-1999 we have 6 set left BREMBO
and one set of 1989-1994 brembo left.
jason
p.s and we have about 15 extra pairs of front brembo rotors for 1995-1999 maxima.
It should be gone within a week or 2 and after this, we are getting more on march. Hopfully price won't rise
#107
Just got home and find out one of my Dimpled-slotted rotor is shot, ABS light came on this morning while going to work, I could only check when I arrived home tonight. Is it possible to resurface a Dimpled-slotted rotor ? Anyhow how much would it cost me to replace the 4 rotors with good quality one I like the Dimpled slotted so far.
Thanks
AA
Thanks
AA
#108
Originally Posted by doublea
Just got home and find out one of my Dimpled-slotted rotor is shot, ABS light came on this morning while going to work, I could only check when I arrived home tonight. Is it possible to resurface a Dimpled-slotted rotor ? Anyhow how much would it cost me to replace the 4 rotors with good quality one I like the Dimpled slotted so far.
Thanks
AA
Thanks
AA
All 4 zinc plated brembo dimpled/slotted is $200 + shipping
let me know
thanks
jason
#109
Hi Jason, thank for answering, meantime I got stuck with the car, so I just slap on the original oem resurface with new pads, so everything is fine for now but that make me think to review my priority since the Nissan Maxima brake system suck. I think it worth to invest in a complete new brakes systems for this spring. I'd like to go for BB kit ( 2 Pistons should be enough ) with 2 pieces rotor. I have 17" TMW GTV with 42 MM offset and the spoke are flat with the wheel so there is a lot of room, let me know what kit you sell and what kind of deal I can get.
Thank you
AA
Thank you
AA
#112
Originally Posted by UNCDooD
i sent you a PM but never heard anything back..
Uncood i never got your pm, .org has been acting weird lately
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
#113
Originally Posted by AuToMaX_95
Uncood i never got your pm, .org has been acting weird lately
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
-J
#116
Originally Posted by AuToMaX_95
Uncood i never got your pm, .org has been acting weird lately
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
Thank brother
AA
#117
Originally Posted by AuToMaX_95
Uncood i never got your pm, .org has been acting weird lately
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
doublea you want the Brembo big brake kit or just the brake package?
$200 for F/R any type of Brembo zinc plated rotors
$70 for Axxis/PBR MM pads
$85 for Full set of Technofit SS lines
let me know
thanks
jason
what kind of payments do you accept?
-Jason
#118
Jason --
Got my product today -- THANKS!!!
Have to give Jason props for exemplifying GREAT
customer service when he shipped my product to
me -- AT HIS EXPENSE -- because FedEx screwed
up the shipment...I saw how much it cost, and it
wasn't cheap -- A1 CLASS MOVE!!!
nice one!
FLO_BOY
Got my product today -- THANKS!!!
Have to give Jason props for exemplifying GREAT
customer service when he shipped my product to
me -- AT HIS EXPENSE -- because FedEx screwed
up the shipment...I saw how much it cost, and it
wasn't cheap -- A1 CLASS MOVE!!!
nice one!
FLO_BOY
#119
Originally Posted by FLO_BOY
Jason --
Got my product today -- THANKS!!!
Have to give Jason props for exemplifying GREAT
customer service when he shipped my product to
me -- AT HIS EXPENSE -- because FedEx screwed
up the shipment...I saw how much it cost, and it
wasn't cheap -- A1 CLASS MOVE!!!
nice one!
FLO_BOY
Got my product today -- THANKS!!!
Have to give Jason props for exemplifying GREAT
customer service when he shipped my product to
me -- AT HIS EXPENSE -- because FedEx screwed
up the shipment...I saw how much it cost, and it
wasn't cheap -- A1 CLASS MOVE!!!
nice one!
FLO_BOY
Thx George =)
Can you please leave me a feedback here
http://forums.maxima.org/showthread.php?t=261307
Uncood
I accept Money order or Paypal
Doublea
I'll check on Brembo, Wilwood for you, I let you know on Monday.
thanks
jason