I'm organizing a group deal through Warpspeed Performance on their
Y-Pipes. I've never heard of a deal this good. If you have any questions then PM me or email me at overley@fastmail.fm, but I'm a full-time college student/working so be patient. You can check them out at:
http://www.warpspeedperformance.com/nissan.htm
Here's the deal:
We would do the following offer good through 2-21-2004 only:
Mandrel bent aluminized steel Y pipes only, gaskets and WSP decal
included.
only 1989-2001 models
01-10 $190 delivered
11-20 $175 delivered
21-30 $160 delivered
Add a high flow cat for just $85.00 for any number.
Insured delivery via FedEx included. Does not include Canada, Alaska or
Hawaii.
This includes: 4 year no rust through warranty.
The site also says: "Our mandrel bent design "Y" pipes are designed to eliminate weld restrictions and enhance exhaust flow.
We designed our "Y" pipes with ground clearance in mind.
We designed our "Y" pipes for the Gen 3 VE dohc and the VG sohc configurations, there is a difference.
All of our pipes have the same long lined flex connector.
Our welders are certified, our welding procedures were approved by a CWI (certified welding Inspector) and we use only high quality Miller welding equipment.
We MIG weld our aluminized steel pipes, all welds are fillet type for added strength and flex, we don't do butt welds because all of our pipes are custom bent.
Our laser cut flanges are 3/8" thick steel which keep flanges from warping and help reduce leaks.
Detailed instructions for easy installation with all hardware included.
Available in either 16 gage aluminized steel.
We only use the highest quality lined flex sections to eliminate the bees in a can sound.
All of our products are proudly made in the USA from materials made in the USA.
Unlike our competition we actually manufacture our products, we don't just send it out to the cheapest bidder.
Our Y pipes continue to outperform our competition, even when "they" dyno them. The Dyno test results we performed showed an increase in torque of .8ft. lbs and an increase of 6.6 to 6.7 hp over that "other Y pipe" for our 1989-1994 model."
They will take check, money orders, Visa/MasterCard or Paypal. If credit
card, give me your name and phone number which they can send call and get
credit card info. If check or money order, make payable to: Warpspeed
Performance and mail to me at:
Matt Overley
5132 Golden Tower Dr.
Evansville, IN 47712
As long as they have an idea of the quantities and model pipes they'll
ship the same week they receive payment, so we can get these maybe even
before March!
To know if it's Fed or Cali:
Raise your hood. Look for a shiny metal identification tag fastened to the passenger side of firewall. The top row is the Vehicle Identification Number, starting with J. The second row is model information. The first five characters are BLHUL. The 12th character is the destination:
N = Canada
V = California
U = US, not California
Credit: Daniel B. Martin
Here's a link that talks about Y-pipes, including how to tell if your car is a Fed or Cali spec.
http://forums.maxima.org/showthread....5&page=1&pp=30
There are tons of others around, so read up. Remember I'm just organizing this deal...everything's through warpspeed so all I can do is what they do. I can't guarantee anything. If you're definitely in then PM me with the following info:
1) Name
2) Address
3) Year and Model (ie: 1996 Fed spec and CAT)
4) Phone Number
5) Email
6) Method of payment
Here's the OFFICIAL list of people who have PM'd me their info. If I missed you then sorry, please PM me again. I'm keeping the updated list of everyone who has given me all their info and committed. I'll update this as we go, but maybe not every day so don't freak out if your name isn't on the list yet. We've got 21, so the price won't be any higher than $160, maybe lower if they give us a better deal. I'll also see if we can get one group shipped out sooner than the 21st.
1.D1NOnly34: 95 Fed
2.NotoriousMak: 95 Fed
3.Brudaddy: 99 Fed
4.Conz35: 95
5.Blackmax96NY: 96 Fed
6.Topdog1207: 95 Fed
7.Silvia: 98 Fed
8.MaxaholicNY: 99
9.BlueC: 99.5 Fed
10.MaxZilla: 98 Fed
11.Maxima-2: '00 Cali
12.Big_Al: 95 Fed
13.glass88jaw: 96 Fed
14.96GreenMax: 96
15.Image: 95 Fed
16.Maxtank: 99 Cali
17.Sadice: 99 Cali
18.Meanbean: 99 Fed
19.MaximaTodd: 97 Fed
20.SMOKEYMOUNTAIN:98 Cali
21.Rowan:95 Fed
22.SpeedCrazie:95 Fed
23.Felix822:97 Fed
24.NismoTam:98 Fed
25.MaxDaddy98:98 Fed
26.BigJayx23:96 Fed
27.Smokeydriver:97 Fed
28.JeEvE:98 Cali
29.Cool J:97 Cali
30.Skyboarder
31.Serguei Batchilo:95 Fed
32.Mymaxlvsattn:99
33.Callmezeus:'00 Fed
34.Gotmaxwiltravel:96 Fed
35.redstradic:'00 Fed
36.geo1317:98 Fed
37.Twoslow2Go
38.Vxn12:Fed
39.Budha56: 96 Fed
Y-Pipes. I've never heard of a deal this good. If you have any questions then PM me or email me at overley@fastmail.fm, but I'm a full-time college student/working so be patient. You can check them out at:
http://www.warpspeedperformance.com/nissan.htm
Here's the deal:
We would do the following offer good through 2-21-2004 only:
Mandrel bent aluminized steel Y pipes only, gaskets and WSP decal
included.
only 1989-2001 models
01-10 $190 delivered
11-20 $175 delivered
21-30 $160 delivered
Add a high flow cat for just $85.00 for any number.
Insured delivery via FedEx included. Does not include Canada, Alaska or
Hawaii.
This includes: 4 year no rust through warranty.
The site also says: "Our mandrel bent design "Y" pipes are designed to eliminate weld restrictions and enhance exhaust flow.
We designed our "Y" pipes with ground clearance in mind.
We designed our "Y" pipes for the Gen 3 VE dohc and the VG sohc configurations, there is a difference.
All of our pipes have the same long lined flex connector.
Our welders are certified, our welding procedures were approved by a CWI (certified welding Inspector) and we use only high quality Miller welding equipment.
We MIG weld our aluminized steel pipes, all welds are fillet type for added strength and flex, we don't do butt welds because all of our pipes are custom bent.
Our laser cut flanges are 3/8" thick steel which keep flanges from warping and help reduce leaks.
Detailed instructions for easy installation with all hardware included.
Available in either 16 gage aluminized steel.
We only use the highest quality lined flex sections to eliminate the bees in a can sound.
All of our products are proudly made in the USA from materials made in the USA.
Unlike our competition we actually manufacture our products, we don't just send it out to the cheapest bidder.
Our Y pipes continue to outperform our competition, even when "they" dyno them. The Dyno test results we performed showed an increase in torque of .8ft. lbs and an increase of 6.6 to 6.7 hp over that "other Y pipe" for our 1989-1994 model."
They will take check, money orders, Visa/MasterCard or Paypal. If credit
card, give me your name and phone number which they can send call and get
credit card info. If check or money order, make payable to: Warpspeed
Performance and mail to me at:
Matt Overley
5132 Golden Tower Dr.
Evansville, IN 47712
As long as they have an idea of the quantities and model pipes they'll
ship the same week they receive payment, so we can get these maybe even
before March!
To know if it's Fed or Cali:
Raise your hood. Look for a shiny metal identification tag fastened to the passenger side of firewall. The top row is the Vehicle Identification Number, starting with J. The second row is model information. The first five characters are BLHUL. The 12th character is the destination:
N = Canada
V = California
U = US, not California
Credit: Daniel B. Martin
Here's a link that talks about Y-pipes, including how to tell if your car is a Fed or Cali spec.
http://forums.maxima.org/showthread....5&page=1&pp=30
There are tons of others around, so read up. Remember I'm just organizing this deal...everything's through warpspeed so all I can do is what they do. I can't guarantee anything. If you're definitely in then PM me with the following info:
1) Name
2) Address
3) Year and Model (ie: 1996 Fed spec and CAT)
4) Phone Number
5) Email
6) Method of payment
Here's the OFFICIAL list of people who have PM'd me their info. If I missed you then sorry, please PM me again. I'm keeping the updated list of everyone who has given me all their info and committed. I'll update this as we go, but maybe not every day so don't freak out if your name isn't on the list yet. We've got 21, so the price won't be any higher than $160, maybe lower if they give us a better deal. I'll also see if we can get one group shipped out sooner than the 21st.
1.D1NOnly34: 95 Fed
2.NotoriousMak: 95 Fed
3.Brudaddy: 99 Fed
4.Conz35: 95
5.Blackmax96NY: 96 Fed
6.Topdog1207: 95 Fed
7.Silvia: 98 Fed
8.MaxaholicNY: 99
9.BlueC: 99.5 Fed
10.MaxZilla: 98 Fed
11.Maxima-2: '00 Cali
12.Big_Al: 95 Fed
13.glass88jaw: 96 Fed
14.96GreenMax: 96
15.Image: 95 Fed
16.Maxtank: 99 Cali
17.Sadice: 99 Cali
18.Meanbean: 99 Fed
19.MaximaTodd: 97 Fed
20.SMOKEYMOUNTAIN:98 Cali
21.Rowan:95 Fed
22.SpeedCrazie:95 Fed
23.Felix822:97 Fed
24.NismoTam:98 Fed
25.MaxDaddy98:98 Fed
26.BigJayx23:96 Fed
27.Smokeydriver:97 Fed
28.JeEvE:98 Cali
29.Cool J:97 Cali
30.Skyboarder
31.Serguei Batchilo:95 Fed
32.Mymaxlvsattn:99
33.Callmezeus:'00 Fed
34.Gotmaxwiltravel:96 Fed
35.redstradic:'00 Fed
36.geo1317:98 Fed
37.Twoslow2Go
38.Vxn12:Fed
39.Budha56: 96 Fed
Senior Member
Awesome deal!
But I've got mine (mandrel/stainless steel) from Budget 3 months ago for $190...now I (kind of) regret that I didn't wait.
But I've got mine (mandrel/stainless steel) from Budget 3 months ago for $190...now I (kind of) regret that I didn't wait.
Senior Member
wat brand is the cat? is it the carsound cat? and does it come with all the necessary hardware? once this deal hits 21... im gonna pm u.. thanx for this awesome deal... 
Unscrew the stock O2 sensors from the old y-pipe, screw them in to the new one. It has fittings for 'em. 
$160? That's a GOOD DEAL... crap... I can't even buy gas for a month with $160!!
(as for the person asking about a cat, I don't see any cat included in this group deal. IIRC WSP does resell Carsound cats, though... he is asking what year your car is and what emissions package (Federal or California) it is to make sure you get the right y-pipe though!)
$160? That's a GOOD DEAL... crap... I can't even buy gas for a month with $160!!
(as for the person asking about a cat, I don't see any cat included in this group deal. IIRC WSP does resell Carsound cats, though... he is asking what year your car is and what emissions package (Federal or California) it is to make sure you get the right y-pipe though!)
What's the difference between mandrel bent stainless steel, and mandrel bent aluminumized steel? The obvious is the money, but is there anything else? Thanks.
Senior Member
Stainless steel is a little more durable. Most y-pipes or anything done custom in piping is just aluminized steel. It is just steel with aluminum plating on it.
Mandrel bent is when they bend it so that there is the same diameter even through the curves. You lose no space for the air to flow. Less restriction.
Mandrel bent is when they bend it so that there is the same diameter even through the curves. You lose no space for the air to flow. Less restriction.
Senior Member
Does Warpspeed sell RSB? If so, I am needing one, and was wondering if we could ask them while we were at it? Just curious.
Member
Hey, I'm in depending on when this closes out. Can ya let me know what date you're taking the last order cause I've been wanting one forever and am fairly impatient...hmmm, impatient, and I want my Max faster, suprise suprise
Member
Wow, I'm an idiot and see now that it ends 2/21/04. Let me think about it and decide if I can wait that long. Let me know if their's any way to make it a lil' quicker for a few bucks more. THANKS!
Quote:
i should be down, ill give an answer in a few days i think, thats dirt cheap, ill try to get some other heads in on itOriginally Posted by smokeydriver
Wow, I'm an idiot and see now that it ends 2/21/04. Let me think about it and decide if I can wait that long. Let me know if their's any way to make it a lil' quicker for a few bucks more. THANKS!
how does this y pipe compare to the budget y? i thought everyones thoughts was that the budget was the way to go.
Senior Member
Well, let's put it this way...without the group deal, Budget is the best way to go. With this group deal, Warpspeed is $160 shipped, and Budget is still $180 not including shipping from Canada. You tell me.
Member
Hi, I am in for the stainless steel TIG welded one if the price is right, please let me know how much more would it cost me, thank you.
Quote:
Y-Pipes. I've never heard of a deal this good. If you have any questions then PM me or email me at overley@fastmail.fm, but I'm a full-time college student/working so be patient. You can check them out at:
http://www.warpspeedperformance.com/nissan.htm
Here's the deal:
We would do the following offer good through 2-21-2004 only:
Mandrel bent aluminized steel Y pipes only, gaskets and WSP decal
included.
only 1989-2001 models
01-10 $190 delivered
11-20 $175 delivered
21-30 $160 delivered
Add a high flow cat for just $85.00 for any number.
Insured delivery via FedEx included. Does not include Canada, Alaska or
Hawaii.
This includes: 4 year no rust through warranty.
The site also says: "Our mandrel bent design "Y" pipes are designed to eliminate weld restrictions and enhance exhaust flow.
We designed our "Y" pipes with ground clearance in mind.
We designed our "Y" pipes for the Gen 3 VE dohc and the VG sohc configurations, there is a difference.
All of our pipes have the same long lined flex connector.
Our welders are certified, our welding procedures were approved by a CWI (certified welding Inspector) and we use only high quality Miller welding equipment.
We MIG weld our aluminized steel pipes, all welds are fillet type for added strength and flex, we don't do butt welds because all of our pipes are custom bent.
Our laser cut flanges are 3/8" thick steel which keep flanges from warping and help reduce leaks.
Detailed instructions for easy installation with all hardware included.
Available in either 16 gage aluminized steel.
We only use the highest quality lined flex sections to eliminate the bees in a can sound.
All of our products are proudly made in the USA from materials made in the USA.
Unlike our competition we actually manufacture our products, we don't just send it out to the cheapest bidder.
Our Y pipes continue to outperform our competition, even when "they" dyno them. The Dyno test results we performed showed an increase in torque of .8ft. lbs and an increase of 6.6 to 6.7 hp over that "other Y pipe" for our 1989-1994 model."
They will take check, money orders, Visa/MasterCard or Paypal. If credit
card, give me your name and phone number which they can send call and get
credit card info. If check or money order, make payable to: Warpspeed
Performance and mail to me at:
Matt Overley
5132 Golden Tower Dr.
Evansville, IN 47712
As long as they have an idea of the quantities and model pipes they'll
ship the same week they receive payment, so we can get these maybe even
before March!
If you're definitely in then PM me with the following info:
1) Name
2) Address
3) Year and Model (ie: 1996 Fed spec and CAT)
4) Phone Number
5) Email
6) Method of payment
Here's the list so far. If I missed you then sorry, please PM me. I also need EVERYONE on the list to PM me with their details and to confirm...if I don't hear from you by the 10th I'm going to take you off the list because I don't want anyone backing out on Warpspeed.
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
Tell all your friends. We can get 21, easy!
Originally Posted by budha56
I'm organizing a group deal through Warpspeed Performance on theirY-Pipes. I've never heard of a deal this good. If you have any questions then PM me or email me at overley@fastmail.fm, but I'm a full-time college student/working so be patient. You can check them out at:
http://www.warpspeedperformance.com/nissan.htm
Here's the deal:
We would do the following offer good through 2-21-2004 only:
Mandrel bent aluminized steel Y pipes only, gaskets and WSP decal
included.
only 1989-2001 models
01-10 $190 delivered
11-20 $175 delivered
21-30 $160 delivered
Add a high flow cat for just $85.00 for any number.
Insured delivery via FedEx included. Does not include Canada, Alaska or
Hawaii.
This includes: 4 year no rust through warranty.
The site also says: "Our mandrel bent design "Y" pipes are designed to eliminate weld restrictions and enhance exhaust flow.
We designed our "Y" pipes with ground clearance in mind.
We designed our "Y" pipes for the Gen 3 VE dohc and the VG sohc configurations, there is a difference.
All of our pipes have the same long lined flex connector.
Our welders are certified, our welding procedures were approved by a CWI (certified welding Inspector) and we use only high quality Miller welding equipment.
We MIG weld our aluminized steel pipes, all welds are fillet type for added strength and flex, we don't do butt welds because all of our pipes are custom bent.
Our laser cut flanges are 3/8" thick steel which keep flanges from warping and help reduce leaks.
Detailed instructions for easy installation with all hardware included.
Available in either 16 gage aluminized steel.
We only use the highest quality lined flex sections to eliminate the bees in a can sound.
All of our products are proudly made in the USA from materials made in the USA.
Unlike our competition we actually manufacture our products, we don't just send it out to the cheapest bidder.
Our Y pipes continue to outperform our competition, even when "they" dyno them. The Dyno test results we performed showed an increase in torque of .8ft. lbs and an increase of 6.6 to 6.7 hp over that "other Y pipe" for our 1989-1994 model."
They will take check, money orders, Visa/MasterCard or Paypal. If credit
card, give me your name and phone number which they can send call and get
credit card info. If check or money order, make payable to: Warpspeed
Performance and mail to me at:
Matt Overley
5132 Golden Tower Dr.
Evansville, IN 47712
As long as they have an idea of the quantities and model pipes they'll
ship the same week they receive payment, so we can get these maybe even
before March!
If you're definitely in then PM me with the following info:
1) Name
2) Address
3) Year and Model (ie: 1996 Fed spec and CAT)
4) Phone Number
5) Email
6) Method of payment
Here's the list so far. If I missed you then sorry, please PM me. I also need EVERYONE on the list to PM me with their details and to confirm...if I don't hear from you by the 10th I'm going to take you off the list because I don't want anyone backing out on Warpspeed.
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
Tell all your friends. We can get 21, easy!
Senior Member
I am also curious about the Stainless Steel one. I don't even know if they would do a gd for us on that one, but if they would, is that something that you guys would want for a little more? What do you think, Budha?
~PM sent!~
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
Senior Member
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.mymaxlvsattn
18.MAXDADDY98
19.mansurxk (maybe)
let me know if this list is correct
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.mymaxlvsattn
18.MAXDADDY98
19.mansurxk (maybe)
let me know if this list is correct
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.MAXDADDY98
Hey if we get more than 30 would it be cheaper?
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.MAXDADDY98
Hey if we get more than 30 would it be cheaper?
Senior Member
well you have me down twice and i just need 1. So 1 mistake there. And now we just need the maybes to confirm that they r really in. So if my count is correct we just need 1 more person to get them at $160
Senior Member
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.mymaxlvsattn
18.MAXDADDY98
19.mansurxk (maybe)
20.glass88jaw
21.big_al (we need to pm him...I posted thread in 4th gen and he said he was in. I told him to post here and don't see it yet.)
Just updating
Any comments on the Stainless Steel thing that was mentioned?
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.mymaxlvsattn
18.MAXDADDY98
19.mansurxk (maybe)
20.glass88jaw
21.big_al (we need to pm him...I posted thread in 4th gen and he said he was in. I told him to post here and don't see it yet.)
Just updating
Any comments on the Stainless Steel thing that was mentioned?
Senior Member
1. D1NOnly34
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.mymaxlvsattn
18.MAXDADDY98
19.mansurxk (maybe)
20.glass88jaw
21.big_al (we need to pm him...I posted thread in 4th gen and he said he was in. I told him to post here and don't see it yet.)
22. Image
2. sadice
3. Brudaddy
4. redstradic
5. djfrestyl
6. conz35
7. topdog1207
8. felix822
9. Rowan
10.Maxtank
11.minsbang
12.BigJayx23
13.Cool J
14.NotoriousMak
15.Budha56
16.Maxima-2
17.mymaxlvsattn
18.MAXDADDY98
19.mansurxk (maybe)
20.glass88jaw
21.big_al (we need to pm him...I posted thread in 4th gen and he said he was in. I told him to post here and don't see it yet.)
22. Image
Senior Member
All we really have left in question:
1. is everyone signed up really in?
2. if we get more than 30, will it be any less?
3. can we get some kind of deal on Stainless Steel, or do you guys even want to?
1. is everyone signed up really in?
2. if we get more than 30, will it be any less?
3. can we get some kind of deal on Stainless Steel, or do you guys even want to?
aluminized steel with 4 year rust thru guarentee is fine with me, specially us CALI guys who don't see huge gains.
Senior Member
Quote:
1. is everyone signed up really in?
2. if we get more than 30, will it be any less?
3. can we get some kind of deal on Stainless Steel, or do you guys even want to?
Originally Posted by Brudaddy
All we really have left in question:1. is everyone signed up really in?
2. if we get more than 30, will it be any less?
3. can we get some kind of deal on Stainless Steel, or do you guys even want to?
i wouldnt mind seeing the price for a stainless steel one... given the fact that we already made the 21 heads already... wouldnt hurt to see wat kind of price it would b shipped... maybe we can get the same deal...??? or somewhere near that price....
as for the cat... he said in the begining of the post. .add 85 bux for a carsound cat.. i just want to know how good is this cat????
I was also wondering about the cat, mine is prob ready to be replaced soon anyway (122K) I've heard some horror stories about 'high flow' cats
Senior Member
we need ss y pipes
please check up on it and let us know how much
Ny..the snows been on the ground ever since the winter started
thanks
please check up on it and let us know how much
Ny..the snows been on the ground ever since the winter started
thanks
