it just said WALKER as the recommendation. but im curious to know what the OE for my 97. i went and looked but the angle was hard to spot anything, but i took the thing out to inspect connections and it was tight.


i emailed them already asking. would bosch or ngk be better?

 

nissan uses bosch

 

btw, where do u see NGK?

 

it was just a thought u know cuz ngk makes o2 sensors as well, but after searchign they dont make one for the rear..

thanks.

 

well, on their site they only offer Walker, Denso and Bosch....walker's the cheapest so i went with that...total was about $113 for 2 front Walker OEM

 

cool thanks..

 

Is this 15% discount still good? I'm getting codes for the O2 sensors, so its that time for replacement!

 

15% off with money order or 10% off with CC phone payment

 

those who have had walkers, any probs/ i guess i'll end up buying the one for the rear b4 it throws a code again..

2 times it came up and 2 times ive resetted. but im guessing it is going bad.
59.42 shipped seems good, but im not sure about the reliabitliy. haven't realy heard of walker b4.

 

Lots of people bought Walkers, nothing wrong with them... Buy another brand for more if you don't want Walkers...

 

ya but the deal only applies to the walkers. but if they are that good. i might as well..

will give it a shot..

 

Who said deal is only for Walkers?

 

is this still goin on? cause if it is ill send out a money order monday. i need the rear sensor.

 

yes i emailed them and they said its only for walkers and even the 1st page??? but ya.

walkers only and yes its going to be 59 or so SHIPPED. im gonna do mines tomorrow.

i hope it lasts long though...

 

1st page says "Mike recommended the Walker sensors." - not you have to buy the Walker sensors and http://forums.maxima.org/showpost.ph...1&postcount=15 also says any of them - they must have changed it recently then

 

but i just emailed them. and they said its just for the walkers. paul welch said it himself.. :P

cuz if it wasn't i wouldve gone w/ bosch. but we'll see, everyone says the walkers are good.

hehe hope my car won't throw codes though its been okay ever since the restart. but i might as well change it like u guys have mentioned.

thanks.

 

jus replaced my bad O2 sensor with the new walker last friday. went to autozone the following monday to reset the CEL...3 days later, the CEL popped bak up

anyone knows what else i can do?

 

yikes ur scaring me.

what code is it and what sensors did u replace? i got a 0707 denoting the rear, 2 times it came up and those 2 times i had put gas at this particular 76. ever since the reset the code is gone.

tomorrow i will jump the code to see if im getting a reading. if not then something is SCREWY..

 

Did you replace the correct sensor? What code you getting now?

 

i'm pretty sure i did replace the correct sensor...autozone guy said it was the front left, which is the one i changed.....dont remember what the code # was tho

haven't checked to see what code it is right now....prolly do it this monday that way i can take to get my state inspection done too jus in case the CEL comes bak on

 

Changed out the one near the radiator?

 

yes...which is the left one

 

Get the code checked again (write it down this time)

 

well, i said i was going to get it checked again monday....and i'll make sure i remember the code this time

 

I've been using Walker sensors for some time now, both for my dad's '99 CA spec and my '97 Fed spec, and have had absolutely no problems.

 

here's the code P0133 i got from the scanner at autozone today, which converts to 0409
but on this thread, 0409 gets skipped
http://forums.maxima.org/showthread.php?t=104931

the scanner still came up as Front O2 sensor

 

thast wierd that a CEL will throw u a code yet its UNDEFINED?

have u tried other brands of O2 sensors? maybe a bosch.

 

nope....bosch is the one i replaced

 

that is REALLY wierd.. so what sensors and brands do u have and have replaced?

all bosch?? did u try reset ecu?

 

ok i posted in another thread and some said the code was for the right O2 sensor near the firewall and not the front left near the radiator....so i'm gonna go ahead and change that one later this week...and i'll give another update

 

I just had my 98 maxima hooked up to the diagnostic at Advance Auto today. It came up codes P0154 (Bank 2 sensor 1)and P0140 (Bank 1 Sensor 2). My question is shouldn't I replace all three sensors? The employee at Advance was telling me that the computer was only showing that it had 2 oxygen sensors on the car and I told him that I thought there were 3. He stated that it was only showing 1 upstream and 1 downstream. What gives?

 

i dont think that guy knows what he is talking bout


anywho...i changed the O2 sensor near the firewall saturday and got Autozone to reset it again for me.....and i passed inspection today..so far so good....usually if the code pops up, it'll pop up about a day after i reset it, so hopefully the CEL doesn't come back on

i've been driving with the CEL on for over a yr

 

are these O2 sensors just the sensor or does it include all of the harness/wiring so it'll just plug in/screw in at the respective ends? or is some splicing involved?

 

"OEM" type = plug and play
"Universal" type = splicing

 

that's all i needed. thanks for the quick reply JaTaN

 

I count 4 on the pic that Jatan posted: http://www.jatan.net/02Sensor1.jpg

I have the Cali spec tho, wonder if that makes a difference?

 

Bumping this back up, is this deal still offered? I need to replace all the O2 sensors, car is running bad and I have broken wires on 2 of them.

 

Call them?

 

are these still avail? 3rd time CEL came on in 2-3 months, i guess i do have to change the rear after all, i have 65k on my 97.

 

i sent them for 1 o2 sensor on SEPT 1 and its SEPT 12 NOW and i just emailed them, they said they didn't get my money order..

this sucks... what's going on!!!! im 100000000000% i sent to their new addy..