O2 Sensors Group Deal!!
07-03-2005, 09:02 PM
#201
Senior Member
Join Date: Jul 2004
Posts: 888
it just said WALKER as the recommendation. but im curious to know what the OE for my 97. i went and looked but the angle was hard to spot anything, but i took the thing out to inspect connections and it was tight.
i emailed them already asking. would bosch or ngk be better?
i emailed them already asking. would bosch or ngk be better?
07-03-2005, 10:27 PM
#204
Senior Member
Join Date: Jul 2004
Posts: 888
it was just a thought u know cuz ngk makes o2 sensors as well, but after searchign they dont make one for the rear..
thanks.
thanks.
07-05-2005, 05:44 PM
#209
Senior Member
Join Date: Jul 2004
Posts: 888
those who have had walkers, any probs/ i guess i'll end up buying the one for the rear b4 it throws a code again..
2 times it came up and 2 times ive resetted. but im guessing it is going bad.
59.42 shipped seems good, but im not sure about the reliabitliy. haven't realy heard of walker b4.
2 times it came up and 2 times ive resetted. but im guessing it is going bad.
59.42 shipped seems good, but im not sure about the reliabitliy. haven't realy heard of walker b4.
07-05-2005, 06:32 PM
#211
Senior Member
Join Date: Jul 2004
Posts: 888
ya but the deal only applies to the walkers. but if they are that good. i might as well..
will give it a shot..
will give it a shot..
07-08-2005, 06:09 PM
#213
Senior Member
Join Date: May 2005
Posts: 218
is this still goin on? cause if it is ill send out a money order monday. i need the rear sensor.
07-08-2005, 06:19 PM
#214
Senior Member
Join Date: Jul 2004
Posts: 888
yes i emailed them and they said its only for walkers and even the 1st page??? but ya.
walkers only and yes its going to be 59 or so SHIPPED. im gonna do mines tomorrow.
i hope it lasts long though...
walkers only and yes its going to be 59 or so SHIPPED. im gonna do mines tomorrow.
i hope it lasts long though...
07-08-2005, 06:35 PM
#215
1st page says "Mike recommended the Walker sensors." - not you have to buy the Walker sensors 
and http://forums.maxima.org/showpost.ph...1&postcount=15 also says any of them - they must have changed it recently then 
and http://forums.maxima.org/showpost.ph...1&postcount=15 also says any of them - they must have changed it recently then
07-08-2005, 07:02 PM
#216
Senior Member
Join Date: Jul 2004
Posts: 888
but i just emailed them. and they said its just for the walkers. paul welch said it himself.. :P
cuz if it wasn't i wouldve gone w/ bosch. but we'll see, everyone says the walkers are good.
hehe hope my car won't throw codes though its been okay ever since the restart. but i might as well change it like u guys have mentioned.
thanks.
cuz if it wasn't i wouldve gone w/ bosch. but we'll see, everyone says the walkers are good.
hehe hope my car won't throw codes though its been okay ever since the restart. but i might as well change it like u guys have mentioned.
thanks.
07-08-2005, 09:26 PM
#218
Senior Member
Join Date: Jul 2004
Posts: 888
yikes ur scaring me.
what code is it and what sensors did u replace? i got a 0707 denoting the rear, 2 times it came up and those 2 times i had put gas at this particular 76. ever since the reset the code is gone.
tomorrow i will jump the code to see if im getting a reading. if not then something is SCREWY..
what code is it and what sensors did u replace? i got a 0707 denoting the rear, 2 times it came up and those 2 times i had put gas at this particular 76. ever since the reset the code is gone.
tomorrow i will jump the code to see if im getting a reading. if not then something is SCREWY..
07-09-2005, 09:04 AM
#219
Originally Posted by MaximaPower
jus replaced my bad O2 sensor with the new walker last friday. went to autozone the following monday to reset the CEL...3 days later, the CEL popped bak up
anyone knows what else i can do?
anyone knows what else i can do?
07-09-2005, 12:52 PM
#220
i'm pretty sure i did replace the correct sensor...autozone guy said it was the front left, which is the one i changed.....dont remember what the code # was tho
haven't checked to see what code it is right now....prolly do it this monday that way i can take to get my state inspection done too jus in case the CEL comes bak on
haven't checked to see what code it is right now....prolly do it this monday that way i can take to get my state inspection done too jus in case the CEL comes bak on
07-11-2005, 08:03 PM
#226
here's the code P0133 i got from the scanner at autozone today, which converts to 0409
but on this thread, 0409 gets skipped
http://forums.maxima.org/showthread.php?t=104931
the scanner still came up as Front O2 sensor
but on this thread, 0409 gets skipped
http://forums.maxima.org/showthread.php?t=104931
the scanner still came up as Front O2 sensor
07-11-2005, 08:52 PM
#227
Senior Member
Join Date: Jul 2004
Posts: 888
thast wierd that a CEL will throw u a code yet its UNDEFINED?
have u tried other brands of O2 sensors? maybe a bosch.
have u tried other brands of O2 sensors? maybe a bosch.
07-11-2005, 10:11 PM
#229
Senior Member
Join Date: Jul 2004
Posts: 888
that is REALLY wierd.. so what sensors and brands do u have and have replaced?
all bosch?? did u try reset ecu?
all bosch?? did u try reset ecu?
07-12-2005, 06:28 PM
#230
ok i posted in another thread and some said the code was for the right O2 sensor near the firewall and not the front left near the radiator....so i'm gonna go ahead and change that one later this week...and i'll give another update
07-15-2005, 02:22 PM
#231
Member
Join Date: Apr 2002
Posts: 41
I just had my 98 maxima hooked up to the diagnostic at Advance Auto today. It came up codes P0154 (Bank 2 sensor 1)and P0140 (Bank 1 Sensor 2). My question is shouldn't I replace all three sensors? The employee at Advance was telling me that the computer was only showing that it had 2 oxygen sensors on the car and I told him that I thought there were 3. He stated that it was only showing 1 upstream and 1 downstream. What gives?
07-18-2005, 09:17 AM
#232
i dont think that guy knows what he is talking bout
anywho...i changed the O2 sensor near the firewall saturday and got Autozone to reset it again for me.....and i passed inspection today..so far so good....usually if the code pops up, it'll pop up about a day after i reset it, so hopefully the CEL doesn't come back on
i've been driving with the CEL on for over a yr
anywho...i changed the O2 sensor near the firewall saturday and got Autozone to reset it again for me.....and i passed inspection today..so far so good....usually if the code pops up, it'll pop up about a day after i reset it, so hopefully the CEL doesn't come back on
i've been driving with the CEL on for over a yr
07-29-2005, 10:22 AM
#236
Junior Member
Join Date: Dec 2001
Posts: 43
Originally Posted by mat_man1
The employee at Advance was telling me that the computer was only showing that it had 2 oxygen sensors on the car and I told him that I thought there were 3.
I have the Cali spec tho, wonder if that makes a difference?
08-23-2005, 12:38 AM
#239
Senior Member
Join Date: Jul 2004
Posts: 888
are these still avail? 3rd time CEL came on in 2-3 months, i guess i do have to change the rear after all, i have 65k on my 97.
09-12-2005, 01:35 PM
#240
Senior Member
Join Date: Jul 2004
Posts: 888
i sent them for 1 o2 sensor on SEPT 1 and its SEPT 12 NOW and i just emailed them, they said they didn't get my money order..
this sucks... what's going on!!!! im 100000000000% i sent to their new addy..
this sucks... what's going on!!!! im 100000000000% i sent to their new addy..