Still looking for a New Warpspeed Ypipe? It's still $160 shipped!!
#42
Hey, I may be getting in on this. When is the deadline to the deal? How late are they accepting money?
#43
Originally Posted by R5a7B
Hey, I may be getting in on this. When is the deadline to the deal? How late are they accepting money?
#45
Originally Posted by Pizzaman
awww **** am i to late for this?
I finally got the response from Dallas...
From: <dallaswarpspeed@sbcglobal.net>
To: "Tony Taing" <tonytaing@comcast.net>
References: <000501c442c7$bd156e80$c83c0418@pauly>
Subject: Re: still stirring a lot of interest
Date: Wed, 26 May 2004 14:31:29 -0500
Tony:
If you would like to post on the ORG that would be fine, we'll do the =
same price $160 delivered for Y pipes 1989-2001, add a cat for $85.
We'll keep it open for a couple of weeks. If may take several weeks for =
them to receive their pipe but they can call in and give their info.
regards
Dallas
To: "Tony Taing" <tonytaing@comcast.net>
References: <000501c442c7$bd156e80$c83c0418@pauly>
Subject: Re: still stirring a lot of interest
Date: Wed, 26 May 2004 14:31:29 -0500
Tony:
If you would like to post on the ORG that would be fine, we'll do the =
same price $160 delivered for Y pipes 1989-2001, add a cat for $85.
We'll keep it open for a couple of weeks. If may take several weeks for =
them to receive their pipe but they can call in and give their info.
regards
Dallas
#47
Originally Posted by zx2max
i would like to get in on this deal, but when do i have to send the money? Payday isnt until next friday.
I want in. 89 Maxima.
#48
I'm in if it is still good to go.. for my 96 GXE 5 spd. for the us model non- cali y-pipe only no cat plz..
#50
so... even though I sent you all my info, i still need to call them and give them that? or do I just need to confirm payment and shipping options? might you be able to give me a little more insight on to what i need to do?
#51
Originally Posted by mel6822
I will need you full name, address, phone # and email address. I will CC you when I send our list to Warpspeed. You can then contact them directly to confirm you order and arrange payment.
Here is the revised list so far...
Please send me your contact information if you haven't already done so. I will CC everyone when I send Warpspeed our list. You can then contact them directly to confirm your order(s) and arrange payment. For those that do not get in on time, I will ask Dallas to see when he would like to set a deadline for you.
Thanks
Tony
Here is the revised list so far...
- mel6822 - 99SE, FED EMISSION
- chowdude - 89SE
- DCM Maxima - 96GLE
- Nazca - 99GLE, CA EMISSION
- TooEasy - 90SE
- tsaulz - 96SE
- Maxima Dan - 01SE
- ludacris - 98SE
- eckohb - 97SE
- kpby911 - ?SE
- maximadoc - 96GXE
- BlackBIRDVQ - 01GXE
- 99maxx-on19's - 99GXE ~ need to know FED or CA EMISSION
- Tjd135 - 95SE
Please send me your contact information if you haven't already done so. I will CC everyone when I send Warpspeed our list. You can then contact them directly to confirm your order(s) and arrange payment. For those that do not get in on time, I will ask Dallas to see when he would like to set a deadline for you.
Thanks
Tony
#52
Originally Posted by antonthegrey
so... even though I sent you all my info, i still need to call them and give them that? or do I just need to confirm payment and shipping options? might you be able to give me a little more insight on to what i need to do?
#53
Originally Posted by 99maxx-on19's
I'm F E D and i'm going to call wsp to let them know i will have my money on friday.Will they be shipping as soon as they get the payments???
#55
I'm in for just the Y-pipe. Do I still need to send you my info Mel or just Warpspeed? If you need my info, what all do you need to know?
#57
Originally Posted by divisions
Is there an group deal option for the y pipe and resonated b pipe?
Thanks
Tony
#59
GD still on if anybody else interested...
I saw this Group Deal thread and contacted Dallas (of WarpSpeed) directly. He offered the Group Deal price to me and now, I got one coming...wooohooo!
For anyone interested in this GREAT DEAL, contact Dallas directly and update this thread.
Here is part of Dallas' latest response to me:
"We'll probably continue the group buy for a few more weeks. No idea so far as to how many, 20 or so I guess. We'll keep cranking them out as long as there is interest."
For anyone interested in this GREAT DEAL, contact Dallas directly and update this thread.
Here is part of Dallas' latest response to me:
"We'll probably continue the group buy for a few more weeks. No idea so far as to how many, 20 or so I guess. We'll keep cranking them out as long as there is interest."
#60
Originally Posted by R5a7B
How much hp gain with:
y pipe?
cat?
cat and ypipe together?
y pipe?
cat?
cat and ypipe together?
#62
Originally Posted by Ludacris
Has anyone gotten any info from Warpspeed since ordering?
#63
We'll hold the price until July1.
We'll hold the price until July 1, 2004. Remember to ask for it as it's only good for Maxima.org members.
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
#64
Originally Posted by bmfjeep
We'll hold the price until July 1, 2004. Remember to ask for it as it's only good for Maxima.org members.
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
It is the same models as last time (1989-2001 Maxima's) and includes the same pricing for aluminized steel Y pipes and cats as well. If you have a question just call Lynne toll free 866-801-9338.
I'll be a bit hard to get a hold of as we are doing dirt work and prepping the slabs for our new shop buildings but we have three people working on pipes and such so there should not be too bad of a wait. I know we have shipped some already.
As always gaskets and fasteners are included.
We may add some 2002 and 2003 Y pipes late this month, we'll have the usual 2-1/2" collector or a 2-1/4" version in case like Cat*man you believe smaller is better.
regards
Dallas
#65
So we can just call them and pay on the phone and give them our adress? Or do we have to go through the org first?
#66
Originally Posted by R5a7B
So we can just call them and pay on the phone and give them our adress? Or do we have to go through the org first?
#68
Originally Posted by R5a7B
Do you need to get oxygen sensors with the pipe also?
#69
Originally Posted by R5a7B
Do you need to get oxygen sensors with the pipe also?
#71
Originally Posted by R5a7B
I'm at 151k... So I suppose I should be replacing them.
How much do they normally run for?
How much do they normally run for?
#72
Just so you guys know.I called monday and gave my cc # and info and recived mine in today! I was expecting atleast 2 weeks but no not even a week! thanks me6822 and WSP.
P.S. i think i got it early cuz it came from dallas and im in houston?
P.S. i think i got it early cuz it came from dallas and im in houston?
#74
Originally Posted by mel6822
As I stated above that's entirely up to you. I'm replacing mine as preventative maintenance and hoping that it'll increase fuel economy. I paid ~$60 each through GD - if you search under the GD section you'll find the thread. Hope that helps.
#79
I received mine 4 days ago. I'm now recording my 0-60 and 1/4 mile times before I get the y-pipe installed. I want to see how much performance gains I'll get after its installed.
#80
Are They Going To Have The Group Deal On The Y-pipe Again Cuz I Miss This One And I Want To Get In On The Deal