Clutch/Flywheel Sale: ACT, Centerforce, Clutch Maters, Exedy, Fidanza, RPS, SPEC
#42
Email me at justin@importcarpartsplus.com or PM us for order updates.
#48
wait....so now the spec stage 1 is crap? UNCDooD, what is wrong with it? I was just about to order this clutch b/c people are saying the exedy stage 1's have TO bearing problems...my alternative was the exedy stage 1, but I wanna know what the maximum power the exedy stage 1 can handle b4 I buy one...
#49
the spec stage 1 seemed like a good alternative...and the guys seem real friendly and knowledgeable over at SPEC inc. plus the clamping force seemed pretty good...now I am confused, I don't know what to get!
#50
Originally Posted by UNCDooD
i bought a spec in the last GB and its worthless. I will be calling tomorrow to order an exedy stage 1. these are in stock right?
#52
ACT doesn't have one. Exedy lists #NSK1002, but it is listed as To Be Anounced. SPEC is the only one I can find for the 3.5L 02+ Altima.
This is the first person to complain about a Spec clutch, and I have sold many for the Maxima, Eclipse, Civic, Mazda and others.
This is the first person to complain about a Spec clutch, and I have sold many for the Maxima, Eclipse, Civic, Mazda and others.
#53
people on the forums here are saying the exedy stage 1's all have TO bearing problems...is that true at all? what is the maximum torque or power capacity of the exedy stage 1 by the way???
#56
Okay I think I will stick with SPEC been hearing good things from a lot of people in alot of different car forums. Anyway how light is the Spec flywheel? And how long from the time I ordered would it take for you to ship out.
THanks,
Rob
THanks,
Rob
#57
10.5 - 11 lbs They can get ready to ship with-in 1-2 days.
You can order with a Credit or Debit card, just call me at 1.434.454.4469.
We can take Visa, MasterCard, American Express, or Discover from US
addresses only and can only ship to the billing address.
You can also pay with a money order, certified bank check, or personal
check. Just go to http://www.importcarpartsplus.com/mailorder.htm Must
clear before shipping.
You can also pay with PayPal to justin@importcarpartsplus.com as long as you
have a US confirmed address.
If you have any questions or need anything else for your ride just let me
know. We have access to over 1000 brands.
Thanks
Justin DeMatteo
Import Car Parts Plus
justin@importcarpartsplus.com
http://www.importcarpartsplus.com
AOL Instant Messenger - SmoothGalant2
Phone 1.434.454.4469
Mobile 1.434.470.4469
Fax 1.434.454.6942
You can order with a Credit or Debit card, just call me at 1.434.454.4469.
We can take Visa, MasterCard, American Express, or Discover from US
addresses only and can only ship to the billing address.
You can also pay with a money order, certified bank check, or personal
check. Just go to http://www.importcarpartsplus.com/mailorder.htm Must
clear before shipping.
You can also pay with PayPal to justin@importcarpartsplus.com as long as you
have a US confirmed address.
If you have any questions or need anything else for your ride just let me
know. We have access to over 1000 brands.
Thanks
Justin DeMatteo
Import Car Parts Plus
justin@importcarpartsplus.com
http://www.importcarpartsplus.com
AOL Instant Messenger - SmoothGalant2
Phone 1.434.454.4469
Mobile 1.434.470.4469
Fax 1.434.454.6942
#66
Originally Posted by VQ30DES
Are the clutches on your list the only ones you sell. Because it seems like a lot of the higher horsepower maxima gyus love the clutchnet 6 puck and i was wondering if you could get it?
Thanks
Justin DeMatteo
Import Car Parts Plus
#67
I need a clutch cause my ACT once again failed- pressure plate again. I'm feeln Spec stage 2 or 3.. not too sure yet but I need to get one like by next week as my car is getting harder and harder to get into gear at the stop lights. How much more is the lightened pressure plate deal from Spec ? they list it at 79 dollars on their site. I already have a Fidanza flywheel so a lightened pressure plate would be a nice addition for every little HP. Is the Stage 3 Maxima clutch a 3, 4 or 6 puck design ?
#71
Originally Posted by BlackBIRDVQ
I need a clutch cause my ACT once again failed- pressure plate again. I'm feeln Spec stage 2 or 3.. not too sure yet but I need to get one like by next week as my car is getting harder and harder to get into gear at the stop lights. How much more is the lightened pressure plate deal from Spec ? they list it at 79 dollars on their site. I already have a Fidanza flywheel so a lightened pressure plate would be a nice addition for every little HP. Is the Stage 3 Maxima clutch a 3, 4 or 6 puck design ?
Stage 3 are 6 puck.
#72
I wanted to clearify something with you. The Exedy clutch you have listed on the front page is stage 1 correct? I know you said in another post that it was but just wanted to double check. It comes complete with all the assembly parts etc..? If so, I will be ordering this clutch from you soon. Thanks
Andy
Andy
#75
VG and VQ use the same clutch. All 86-01 Maximas have the same clutches. Weird ehh ?
Justin- I wanna get the Stage 2 SPEC, lemme know where I can send the $$$ via PayPal and how soon can I get it, I wanna have the new clutch installed by next weekend and broken in for the next autoX.
Justin- I wanna get the Stage 2 SPEC, lemme know where I can send the $$$ via PayPal and how soon can I get it, I wanna have the new clutch installed by next weekend and broken in for the next autoX.
#76
Justin, I just send ya $$$ for the Exedy clutch for my 01 Maxima, is it possible to have it shipped to my work address ? I am home late everyday and its almost impossible for me to take delivery of my clutch. Plus I'm doing the clutch at work anyways.
#78
any more reviews on spec stage 2 or 3? hard pedal?
BTW, i have spec 1 and i have had a TO bearing issue, but maybe its cause of install...clutch cant take power at top of rpm with SC...the shift into second has slippage, especially after a few runs, even on a cooler day.
BTW, i have spec 1 and i have had a TO bearing issue, but maybe its cause of install...clutch cant take power at top of rpm with SC...the shift into second has slippage, especially after a few runs, even on a cooler day.
#79
I've had a SPEC Stg 2 in my Infiniti G20 and under 10psi around 260WHP the clutch would start to slip, if I nailed the gas boost would kick in very quickly and clutch wouldn't hold it. I've had bad luck with ACT, SPEC and Clutchmasters- they like to launch springs from the disk and cause nasty drivability or even blow up the disk into millions of pieces. JWT uses Pressure Plate that has been modified, and stock pplate is a Exedy piece. I've ran my JWT cluch for 3 years with no problem even under 300WHP in my old Sentra SE-R. I pondered my thoughts for a few hours and decided with a Exedy.
#80
Originally Posted by Xtremeracer
I wanted to clearify something with you. The Exedy clutch you have listed on the front page is stage 1 correct? I know you said in another post that it was but just wanted to double check. It comes complete with all the assembly parts etc..? If so, I will be ordering this clutch from you soon. Thanks
Andy
Andy