cobymoby

iTrader: (2)

THIS DEAL IS CLOSED. THANK YOU FOR MAKING IT A HUGE K&N SELL OFF!


I have a few cases of K&N RE0930 filters on the way. They are 6" long and 6" wide at the base.

I bought old stock from DC Sports who used to use K&N for their DAC intake kits. They are stamped with the DC logo on them.

http://www.knfilterchargers.com/sear...x?Prod=RE-0930

$30 shipped via 8 day parcel post - no insurance available
$32 shipped via 3 day air with delivery confirmation

Regards,
Bryan
bryan@berktechnology.com

ManualMaxima

iTrader: (10)

which intakes and for what gen are the these going to fit?

tko507

I have the Injen CAI on my 04' Maxima. Will it fit the Injen CAI? Thanks in advance.

cobymoby

iTrader: (2)

It should fit an Injen but I'm not 100% sure. You just have to measure the width of the Injen, if you have the space to fit it then you'll be fine. The filter inlet is the same size, 3".

This should fit most of the intakes out there. The only one where they may be a fitment issue is Place Racing because the fender space is limited. If it is a under hood intake then you will not have any problems.

{-_-}

iTrader: (2)

will this fit the 97 i30 (stock)?

Flava_24/7

iTrader: (46)

You take paypal?

Glude

iTrader: (5)

The injen filter for the 04 max has a 3 1/2 inch filter so it wont fit. unless you use just the mid pipe and make your injen a short ram like I did.

cobymoby

iTrader: (2)

Yes, "paypal@berktechnology.com"

cobymoby

iTrader: (2)

no, it will not. If you want the stock replacement filter then you have to go with the 33-2031-2. $40 shipped.

cobymoby

iTrader: (2)

Are you sure the filter ID is 3.5"??

Glude

iTrader: (5)

Im possitive, the mid pipe is 3 inch but the opening on the 2nd piece that runs to the fender well gets wider at the end. I might possibly be ordering one of these filters though because im running my injen as a short ram.

rule da road

How about some weapon r short rams, will it fit? I don't know what diameters are so if any posts it'll be good to know.

cobymoby

iTrader: (2)

as long as your intake pipe is a 3" diameter then it will fit. Here's how to find the diameter of the pipe without taking it off. Wrap a piece of string around it to measure the circumfrence of the pipe. Divide by "pi" or 3.14. That is the diameter of your pipe.

JeEvE

iTrader: (10)

Do you have any left?

cobymoby

iTrader: (2)

I have 31. Once these are gone, they are gone. I will not be getting any more of these at this price.

JeEvE

iTrader: (10)

payment sent!

cobymoby

iTrader: (2)

thanks, got it.

cobymoby

iTrader: (2)

all of them are going out today.

cobymoby

iTrader: (2)

Those pics I promised. You will get exactly what you see. There are not retail boxed. They are OEM filters that were made for DC Sports.

BioMaxDDS

iTrader: (1)

does anyone know if these will fit frankencar intake for 02? I'll take one if it fits, thx

goodhead

iTrader: (4)

i got a generic CAI off ebay for a 96 max will this fit?

dgmaxse

Does it fit a 2000 maxima with a stock intake? I guess I would need a 3" adapter right?

cobymoby

iTrader: (2)

Yes it will.

cobymoby

iTrader: (2)

It should but I am not 100% sure. If your intake inlet is 3" then yes, this will fit. Make sure that you have clearance for the filter.

cobymoby

iTrader: (2)

You should just go with our basic intake system which comes with all of the neccesary brackets, hardware, instruction manual etc. I can include this same filter or a K&N RU-2820. The choice is your's.

Feel free to give us a call.

Regards,
Bryan 949-679-8618

BioMaxDDS

iTrader: (1)

payment sent.
my paypal address is
tapwr3000@hotmail.com
thx

cobymoby

iTrader: (2)

Got it, thank you. The filter will go out tomorrow.

Regards,
Bryan

dgmaxse

What's the difference between the RU-2820 and this one?

cobymoby

iTrader: (2)

Just the shape of the filter. The actual size of the filter is about the same.

The RU2820 is a cylinder shaped filter and the RE0930 is a cone shaped filter.

NYC_Maxima97

Just sent paypal

speeds5@aol.com

cobymoby

iTrader: (2)

got it, thank you. already sent it out.

kraz3eaocp

Are these still available? Please let me know. Thank you.

cobymoby

iTrader: (2)

yes, still available.

Glude

iTrader: (5)

Still some available???

cobymoby

iTrader: (2)

Yes, will not run out of these anytime soon.

MadChef

iTrader: (1)

Payment sent.

R5a7B

Payment sent also.

Flava_24/7

iTrader: (46)

Was it determined wether or not these fit the Injen CAI?

cobymoby

iTrader: (2)

Here are the dimensions:

RE-0930 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 3 in (76 mm)
Flange Length: 1.75 in (44 mm)
Flange Type: Centered
Height: 6 in (152 mm)
Top Outside Diameter: 4.625 in (117 mm)
Top Style: Rubber
Top Material/Finish: None
Filter Re-Oiling Amount: 1.27 oz (38 ml)
Flanges: 1
Weight: 1.6 lb (0.7 kg)
Product Box Length: 6.25 in (159 mm)
Product Box Width: 6.25 in (159 mm)
Product Box Height: 10.81 in (275 mm)

sterlingmissile (the .org scammer)

Guys,

Bryan is the best. I ordered my filter and it came as described BRAND NEW in record time. He is great to deal with and an excellent business man. I am going to order another soon as backup for my CAI. Best prices I have seen and I recommend him to anyone who need a K&N.