I made up a trailerload of parts to take to Maxus, which nobody bought!
The credit card bills have rolled in this month for all the parts I made last month, and I have no money to send them..


sooo, everything's on sale so I can pay bills!

Suspension
Stage 1 Lower Tie bars: $65 shipped
Stage 2 Lower Tie Bars: $175 shipped
Rear Strut Tower Brace for 3 gens: $95 shipped


SS Lines
Technafit SS Brake line kits: $105 shipped
SS Clutch lines: $25 shipped Have 3 and 5 gen in stock, no 4 gen.

Ground Kits: 3 gen-$54, 4 gen: $40, 5 gen: $45 shipped

Brake kits:
5th gen caliper/2004 Max rotor relocation kit: $145 shipped
Z32 caliper/2004 Max rotor kits, $190 shipped
(I also have rear SS lines available to go with the brake kits, and they are an additional $45 a pair when purchased with a brake kit)


All of these prices include shipping to the main 48 states. If you live outside these areas, please contact me for a shipping quote.

I accept check, money order, or PayPal. Paypal is sales@mattblehm.com, or PM/email me for mailing address to send check/MO. Prices will be good through July 4, on in-stock items only. I have all of the listed items in stock currently, but when I sell out, it's going to take me a while to make more and it's back to regular prices. So get 'em while I have 'em!!

Everyone, I'm headed out of town for about a week. should be back around July 8-9.
I will try to check the forums, but no guarantess. my parents dialup SUXORS like a $5 *****. If you need to get in touch with me, please shoot me an email to sales@mattblehm.com or tech@mattblehm.com

These GD prices are still good through july 4 and paypal is always on...

 

Stage 2 Lower Tie bar for me i sent an email

 

YGM back!

 

I'll take a 5.5 gener's LTB stage 2 for sure...let me call my mechanics to see if i can get the part shipped to them direct to avoid parents trouble.

 

Yo Matt could you include a copy of instructions for ground kit for a 99 maxima if I buy the Stage 2 lower tie bar? I bought a used Sun Automotive ground kit off ebay but it didn't come with instructions and I figure it should be the same to install as yours. I just need to know where to bolt them.
THanks

 

Shogun, that's no problem.. I'll be glad to ship to a shop if you wish.

One_Mil_2010, don't take this the wrong way, but the ground kit instructions for for people that actually buy my kit. handing out the instructions to everyone wouldn't be wise as a business move. Not smart to give away the things I worked hard on and am trying to sell to put food on my table..

 

Payment sent for SS clutch lines. For a 95 maxima.
Thanks

Will be sending payment for technafit brake lines next week. What does the kit include?
How good are these? Is there any feedbacks that i can read about?
Thanks
Shawn

 

Payment refunded for the clutch line.. I don't have any 4 gen lines in stock, sorry. (I've edited main post for eveyone else).

I don't have any particular reviews on the technafit SS lines.. but they're good quality SS lines, just like all the other brands out there.
they include all 4 lines, 4 new banjo bolts, and 8 copper crush rings. everything you need to do the install other than brake fluid.

 

Hey Matt, I just purchased the front BBK for a 4th gen. I was wondering if there was a sale price for the rear BBK. If there is I may be incline to purchase it. Just an idea though, let me now.

 

Are the stage II lower tie bars powdercoated or something?

Thanks,
drew

 

What's included w/ this Z32 caliper/2004 Max rotor kits, $190 shipped?

 

Do the ground kits come in any color choices or is the coating clear?

 

Hey Matt!

I'm interested in the 5th gen caliper/2004 Max rotor relocation kit with the SS Lines but I'm wondering about the rotors. Are you giving a deal on those too or could you recommend a place to buy some? Thanks!

Justen

 

i have basic teinc coilover will i have any problem if i put on Stage 2 Lower Tie Bars

 

the_luch, I can make you a deal on the rear BBK, but shipping to Canukistan is going to hurt. I'll get you a quote in a little bit.

Drew, all of the bars are powdercoated gloss black. you can see pics on my website here: http://mattblehm.com/suspension.htm

jmeister, the kit includes relocation brackets, front pair of SS brake lines, and all of the mounting hardware necessary. You'll nee to supply rotors, calipers, and pads. I can get all of that for you if you wish, but you can get it cheaper yourself since I don't have any wholesale sources on that stuff yet.

M_oz. 555, ground kits come in solid or clear red or black, clear blue, or clear silver.
basically everything in this pic, plus solid black: http://www.mattblehm.com/HSS_images/wire_assortment.jpg

Justen, the best place I've found for the 2004 Maxima rotors is Irotors.com. any of the ones I sell with my kits I get from them, so you might as well just get them direct and save both of us the time and hassle of moving money twice as far.

speedymax99, unless you're REALLY low, then you shouldn't have a problem with the LTB. my car is pretty low (GC type coilovers, approx 1.75" drop) and I haven't had an issue with it at all.

 

payment sent for lower tie brace stage 2 thanks

 

anyway i can get just a set of z32 calipers?

 

Sure.. I can get you some reman calipers for $300 + ship...

rchun, I assume you want one for your 2002?

 

Thanks Matt, let me know how much shipping will be. Hopefully it's in my price range.

 

interested in SS clutchlines for a 2000 nissan maxima i willl be contacting you when i get the money.

 

Hey Matt,

Are there any discounts for buying more than one thing? Say a stage 1 and 2 and a RSTB?

Thanks

 

Hey Matt,

Did you get my email?
I'm also interested in a set of rear SS brake lines for the stock calipers

 

that is correct 2002 maxima se..thanks matt!!!

 

awww mannnnnn. Any idea if you're gonna get any more clutch ss line for the 4th gen?.
Thanks for the update and info.

 

I want the following for a 97SE:

Stage 2 lower tie bar
Ground Kit
Z32 caliper/2004 max rotor kit
rear SS lines

I am also interested in a deal on the BBK for the rear. I also sent an email.

 

question to matt: would a stage 1 + stage 2 lower tie bar be needed or only a stage 2?
what I'm saying is a stage two an upgrade to the stage one or do they both work in tandem?

 

Maxmus_X, I'll be glad to combine shipping on them which will save you another $10 or so. being sale prices, they're discounted a decent amount already.
You'll want either the stage I or II bar.. the SI is part of the SII.

TsingTsaoNYC, not sure which email you are.. I get about 60 a day. let me know your name or email and I can look it up.. I have the SS rear lines in stock as well.

rchun08, I'll get it shipped out today, thanks!

MrRogerStatus, I'll be contacting technafit about getting some next time I order lines from them. they were changing things around last time I placed an order, and I won't need anything else for a while.. But yes, I'll be picking them up next time I order.

Omowe, got your email. I'll give you a complete quote shortly.

Studio718, you'll want one or the other. the sTage I is one of the parts used in the stage 2.

 

Matt,

I sent the email 2 days ago from davetsao@hotmail.com

 

ahh okay.. yeah, it was way down there. simply forgot to reply to it the first time I read it. look for a reply in 5-10 minutes.

 

Sending payment for stage 2 and rstb soon. Curious to know what kind of tools is needed for the stage 2 installation and is there instructions on bolting it on? Hopefully the grinding required isn't a pita to do and project too time consuming with hand tools.

Thanks again.

 

no, it's not bad. I'll send instructions as well.
the grinding required on the 3 gen is just to enlarge one hole in your gontrol arm gusset by about 2-3mm. if you have a die grinder, then it's 5-10 minutes.. a dremel will take a while.

tools needed are 27 and 22 mm sockets, couple of extensions, breaker bar, etc.

 

Paypal payment sent.

 

Matt,

Can you email (davetsao@hotmail.com) or pm me a quote on the combined following:

Grounding kit for 4th gen
Z32 caliper/2004 Max rotor kit
Rear SS brake lines for the stock rear 4th gen calipers

 

Matt,
Interested in ground kit, sent you email.

 

two questions - are the SS brake lines all 4 lines? and do you have them for a 5.5gen? and will the stage 2 ltb fit over the new ebay/ssautochrome headers/y-pipe set up for my 03 max?

 

Paul,
I'm out of blue right now, but will be picking up another spool of wire today.. will be able to ship tomorrow.

03on18s, yes, the SS brake lines are for all 4 lines. just checked in the shop and I have the lines in stock for a 5.5 gen.
Looking at the pictures here: http://www.ssautochrome.com/level.itml/icOid/1433
the LTB should fit without a problem. If it doesn't, I'll be glad to offer you a refund on it. I know there are some issues with the cattman headers because of the loop at the bottom for hte equal length.

 

Is the relocation kit sold?

 

errr, which one? I think I have one of the 5th gen caliper relocation kits left in stock, but I have a pile of the Z32 brackets.

 

Matt,

Payment (PayPal) sent for

1. Grounding kit for 4th gen (clear red)
2. Z32 caliper/2004 Max rotor kit
3. Rear SS brake lines for the stock rear 4th gen calipers

Once you ship can you send me a tracking # to davetsao@hotmail.com

 

got it! already packed up and will ship out in the next little bit.
you'll get tracking info later.