PBR/Axxis Brake Pads - Ultimate, Metal Master XBG, Deluxe Plus
11-07-2005, 11:28 AM
#82
Originally Posted by brian02max
Hey Jeff,
How do the Metal Masters compare to Hawk HPS or EBC Greenstuff pads?
Thanks
How do the Metal Masters compare to Hawk HPS or EBC Greenstuff pads?
Thanks
Thanks,
Jeff
11-08-2005, 01:23 PM
#84
Originally Posted by brian02max
Jeff-
You guys are in Monroe? I grew up in Snohomish! Small world.
Anyway, ordering a full set on your site now. Awesome deal.
You guys are in Monroe? I grew up in Snohomish! Small world.
Anyway, ordering a full set on your site now. Awesome deal.
Regards,
Jeff
11-09-2005, 10:47 AM
#86
Originally Posted by brian02max
When do you expect my order to ship? I'm guessing it's 3-4 days transit to VA.
Thanks again,
Jeff
11-10-2005, 10:16 AM
#88
Originally Posted by joeyd
how much is shipping for front 300zx delux pads and rear 02 maxima delux pads so i know how much to send for paypal
Thanks again,
Jeff
11-10-2005, 09:57 PM
#89
I am intrested in buying whatever I need to elimate the squeaking my powerslot + hawk HPS fronts are giving me. Its pretty bad. Often the squeak will go away once the pads and rotor is heated up, but after 2-3 minutes of driving at speed the squeak will come back.
Just to note, the OE pads and rotor does not dust at all nor will you hear squeaks (maybe during the break in period, but certinally not after)
So my question, if I threw some Deluxe pads at those powerslots, would the squeaking go away?
Just to note, the OE pads and rotor does not dust at all nor will you hear squeaks (maybe during the break in period, but certinally not after)
So my question, if I threw some Deluxe pads at those powerslots, would the squeaking go away?
11-11-2005, 11:41 AM
#90
Originally Posted by RR5
I am intrested in buying whatever I need to elimate the squeaking my powerslot + hawk HPS fronts are giving me. Its pretty bad. Often the squeak will go away once the pads and rotor is heated up, but after 2-3 minutes of driving at speed the squeak will come back.
Just to note, the OE pads and rotor does not dust at all nor will you hear squeaks (maybe during the break in period, but certinally not after)
So my question, if I threw some Deluxe pads at those powerslots, would the squeaking go away?
Just to note, the OE pads and rotor does not dust at all nor will you hear squeaks (maybe during the break in period, but certinally not after)
So my question, if I threw some Deluxe pads at those powerslots, would the squeaking go away?
Thanks again,
Jeff
11-11-2005, 01:01 PM
#91
Alright, I really hate to throw on new pads when I just replaced them 3 months ago. But if they will cure the squeaking.. Consider them purchased. I just need the price and shipping to zip code 92883.
Thanks!
Thanks!
11-11-2005, 03:31 PM
#92
Originally Posted by RR5
Alright, I really hate to throw on new pads when I just replaced them 3 months ago. But if they will cure the squeaking.. Consider them purchased. I just need the price and shipping to zip code 92883.
Thanks!
Thanks!
Thanks again,
Jeff
11-16-2005, 12:20 AM
#94
Member
Join Date: Apr 2004
Location: Oxnard, CA
Posts: 289
I have a max but i was wondering if you had pads for a 95 Infiniti J30?
11-22-2005, 08:19 PM
#97
*order placed*
(bump for a good deal)
Order id: #21684
Picked up a complete set of Deluxe plus pads for my 2002 SE. Also nabbed two rear brembo oe blank rotors.
Going to see if these pads will stop the squeaking hawk APS pads when used with powerslot front rotors. If not, I'm going to have to drop in new brembo oe blank front rotors.
Total was $145 shipped, even a good deal before the .org discount.
Order id: #21684
Picked up a complete set of Deluxe plus pads for my 2002 SE. Also nabbed two rear brembo oe blank rotors.
Going to see if these pads will stop the squeaking hawk APS pads when used with powerslot front rotors. If not, I'm going to have to drop in new brembo oe blank front rotors.
Total was $145 shipped, even a good deal before the .org discount.
11-23-2005, 10:48 AM
#98
Originally Posted by RR5
(bump for a good deal)
Order id: #21684
Picked up a complete set of Deluxe plus pads for my 2002 SE. Also nabbed two rear brembo oe blank rotors.
Going to see if these pads will stop the squeaking hawk APS pads when used with powerslot front rotors. If not, I'm going to have to drop in new brembo oe blank front rotors.
Total was $145 shipped, even a good deal before the .org discount.
Order id: #21684
Picked up a complete set of Deluxe plus pads for my 2002 SE. Also nabbed two rear brembo oe blank rotors.
Going to see if these pads will stop the squeaking hawk APS pads when used with powerslot front rotors. If not, I'm going to have to drop in new brembo oe blank front rotors.
Total was $145 shipped, even a good deal before the .org discount.
Regards,
Jeff
11-26-2005, 10:27 AM
#100
Member
Join Date: May 2004
Posts: 32
I ordered the MM pads today, thanks for the deal.
11-26-2005, 11:01 AM
#101
Guest
Posts: n/a
im going to order these as well. but i had a question.... is the deluxe plus's stopping power much sacrifised compared to metal master's to achieve the low dusting factor? i dunno which to go for. im lookin for very good stopping power and yet low dust as im on 19's that chew up pads. im leaning towards deluxe but i dont want to sacrifise performance by a lot for low dust
11-28-2005, 01:28 PM
#103
Originally Posted by VIP Maxima
im going to order these as well. but i had a question.... is the deluxe plus's stopping power much sacrifised compared to metal master's to achieve the low dusting factor? i dunno which to go for. im lookin for very good stopping power and yet low dust as im on 19's that chew up pads. im leaning towards deluxe but i dont want to sacrifise performance by a lot for low dust
Thanks,
Jeff
11-30-2005, 10:05 AM
#104
Guest
Posts: n/a
Originally Posted by importrp
Go with the Deluxe Plus, at least thats what I would do. They perform slightly worse than the MM, but dust a lot less.... Hope that helps.:thumsbup:
Thanks,
Jeff
Thanks,
Jeff
thanks, i just called to order but nobody picked up so i did it online
12-01-2005, 11:50 AM
#105
Originally Posted by VIP Maxima
thanks, i just called to order but nobody picked up so i did it online
At any rate, thanks for the order, we'll ship asap!
Best Regards,
Jeff
12-05-2005, 05:10 PM
#107
Senior Member
Join Date: Jul 2001
Posts: 270
just got my deluxe pads last week and installed them.
they seem nice, no squeaking so far. as for brake dust,
its too early to tell. ordering and shipping were easy,
overall a good deal and good buying experience. but next time i think
i will look for pads that come with the shims and metal
brackets, i had to use my old ones which were pretty
crappy.
they seem nice, no squeaking so far. as for brake dust,
its too early to tell. ordering and shipping were easy,
overall a good deal and good buying experience. but next time i think
i will look for pads that come with the shims and metal
brackets, i had to use my old ones which were pretty
crappy.
12-06-2005, 12:07 PM
#108
Originally Posted by kickyoazzz
just got my deluxe pads last week and installed them.
they seem nice, no squeaking so far. as for brake dust,
its too early to tell. ordering and shipping were easy,
overall a good deal and good buying experience. but next time i think
i will look for pads that come with the shims and metal
brackets, i had to use my old ones which were pretty
crappy.
they seem nice, no squeaking so far. as for brake dust,
its too early to tell. ordering and shipping were easy,
overall a good deal and good buying experience. but next time i think
i will look for pads that come with the shims and metal
brackets, i had to use my old ones which were pretty
crappy.
Best Regards,
Jeff
12-10-2005, 09:40 PM
#110
Parts received, got them installed today. Did the brake bedding procedure as listed on the bottom of the Deluxe Plus pad box. Everything went smoothly, and something was missing.
SQUEAKING
To wrap up:
2002 maxima se
Powerslot front rotor + Deluxe Plus Pads
Brembo blank rear rotor + Deluxe Plus Pads
I need to clean off my wheels to check if they dust at all or whatever, but stay tuned.
Major props to Jeff for knowing his brake pads.
SQUEAKING
To wrap up:
2002 maxima se
Powerslot front rotor + Deluxe Plus Pads
Brembo blank rear rotor + Deluxe Plus Pads
I need to clean off my wheels to check if they dust at all or whatever, but stay tuned.
Major props to Jeff for knowing his brake pads.
12-12-2005, 11:46 AM
#111
Originally Posted by RR5
Parts received, got them installed today. Did the brake bedding procedure as listed on the bottom of the Deluxe Plus pad box. Everything went smoothly, and something was missing.
SQUEAKING
To wrap up:
2002 maxima se
Powerslot front rotor + Deluxe Plus Pads
Brembo blank rear rotor + Deluxe Plus Pads
I need to clean off my wheels to check if they dust at all or whatever, but stay tuned.
Major props to Jeff for knowing his brake pads.
SQUEAKING
To wrap up:
2002 maxima se
Powerslot front rotor + Deluxe Plus Pads
Brembo blank rear rotor + Deluxe Plus Pads
I need to clean off my wheels to check if they dust at all or whatever, but stay tuned.
Major props to Jeff for knowing his brake pads.
Thanks for the props, and the business!!!
Best Regards,
Jeff
12-14-2005, 10:12 AM
#113
Originally Posted by FishyMan
does the MM squeek then??
Thanks,
Jeff
12-16-2005, 02:17 AM
#114
Senior Member
Join Date: Jul 2004
Posts: 888
so excited. will be instally them VERY SOON ... thanks.. again..
thanks.. again..
12-16-2005, 08:03 AM
#115
Ah well I gave it about a week. There is a squeaking noise after I apply brake pressure. It will stop if I let off the pedal. Guess I have to drop in oe blank front rotors. No more powerslots up front.
12-19-2005, 12:54 PM
#116
Originally Posted by RR5
Ah well I gave it about a week. There is a squeaking noise after I apply brake pressure. It will stop if I let off the pedal. Guess I have to drop in oe blank front rotors. No more powerslots up front.
Thanks again,
Jeff
12-20-2005, 09:45 PM
#117
Senior Member
Join Date: Jul 2004
Posts: 888
To double check, is the 97 maxima METAL MASTERS product number D1232RM?
THanks.
THanks.
12-21-2005, 09:57 AM
#118
Originally Posted by FishyMan
To double check, is the 97 maxima METAL MASTERS product number D1232RM?
THanks.
THanks.
Thanks again,
Jeff
12-22-2005, 10:32 AM
#120
Originally Posted by RR5
Ok, I got some pretty bad steering wheel vibration today. So it looks like I am going to pick up the brembo oe front rotor blank. What would they run shipped to 92883.
Thanks
Thanks
Thanks again,
Jeff