Now that I've offended everyone it's time for the annual "clean out my shop so I can buy my wife something for Christmas" Sale!


Suspension
Stage 1 Lower Tie bars: $65 shipped
Stage 2 Lower Tie Bars: $175 shipped
Rear Strut Tower Brace for 3 gens: $95 shipped
Rear Parallel link replacement kit for 3 gens: $360 shipped
Rear Sway Bar Brackets: $45 shipped
(I have stage 1 and 2 in stock for 3,4,5 gens and stage 2 in stock for B14 Sentra)

SS Lines
Technafit SS Brake line kits: $100 shipped
SS Clutch lines: $25 shipped Have 3 and 5 gen in stock, no 4 gen.
Z32/BlehmCo BBK Conversion lines: $45/pr shipped
rear SS lines to fit stock calipers, $45/pr shipped

Ground Kits: 3 gen-$54, 4 gen: $40, 5 gen: $45 shipped

Brake kits:
5th gen caliper/2004 Max rotor relocation kit: $145 shipped
BlehmCo brake kit to mount Z32 calipers/2004 Max Rotors, $190 shipped (includes brackets, front lines, and all mounting hardware. If you're interested in calipers and rotors as well, I'll price those separately.)
2-pc 12.6" Rotors to fit my kits and replace 2004 Max Rotors: $550 shipped

Energy Suspension Polyurethane Bushings
7.1114G 4-5G Motor Mount set, $85
7.1115G 00-03 Shifter Bushing, $22
7.1116G 4-5Gen Subframe bushings, $26
7.3111G 3/4Gen Control Arm Bushings, $40
7.3117G 3 Gen Parallel link bushings, $43
7.3118G 5Gen control arm bushings, $55
7.5118G 4gen front sway bar, $10
7.7108G 5gen rear trailing arms, $75


All of these prices include shipping to the main 48 states. If you live outside these areas, please contact me for a shipping quote.

I accept check, money order, or PayPal. Paypal is sales@mattblehm.com, or email me for mailing address to send check/MO. Prices will be good through Jan 5, 2006 so you have plenty of time to buy gifts for your friends or blow your Christmas money you received! I have all of the listed items in stock currently, but when I sell out, it's going to take me a while to make more, So get 'em while I have 'em!!

 

holy shi0t

190 shipped for the Z32 calipers w/ 6th gen rotors??



Is it this kit you are offering w/o the lines?

 

That's without the rotors or calipers- just the brackets, lines, and hardware.


I'll edit my original post to be more clear.

 

NIIIIIIICE!
You put this stuff on sale just in time!!!
I'll hopefully be placing a quite large order in about 4 days.....
Thanks!

Mike

 

woohoo!!
no more beans and potatoes for us this winter!

 

I see a Stage 1 LTB in my future

 

Matt's stuff is great! I have a bunch on my car and each one was a nice addition. If you are on the fence about buying stuff, just do it!!!

 

hey matt, how come you dont make the FRONT strut tower brace?
or am i just forgetting?

 

Are these for the front control arms? What brand are they? OEM replacements?

 

Stage I LTB is definately worth the money for anyone thinking about buying one. Plus Matt is a great guy to deal with.

 

And I see stage II in mine.

 

how long is this sale going on for? will it be around.. say after christmas?

and how many 5.5 gen ground kits do you have left? and what colors?

 

Are the brackets that mount the z32 calipers the same as the 5 gen relocation ones?

 

[QUOTE=Matt93SE]Now that I've offended everyone it's time for the annual "clean out my shop so I can buy my wife something for Christmas" Sale!


Suspension
Stage 1 Lower Tie bars: $65 shipped
Stage 2 Lower Tie Bars: $175 shipped
QUOTE]

Only thing im saving on is shipping??? thats it???

 

Nocturnal, basically I'm throwing in free shipping, which equates to a 10% overall savings on it. I'll be glad to charge you $160 for a stage 2 lower tie bar and still charge my standard $15 for shipping if you wish.

Spin20, the brackets are different between the relo kit and the Z32 brake kit. just a couple mm in the spacing, but enough that you can't use one bracket for both.

MaxedOut, read the text at the bottom of the original post for a closing date. On the ground kits, I still make them to order. I keep a small stock of them made up- one or two of each color- but I have several hundred feet of each color wire.. I can make them up as needed to fill the order. available colors are here:
http://www.blehmco.com/imagens/groun...ound_wires.jpg
(note the solid black and the clear/smoked black).

MaximaPolak, bring it on! I just made 25 of them!
Dubbya, thanks for the props! :thumbsu
XtinctWS6, those are Energy Suspension Polyurethane bushings.

andy044, I don't make a FSTB because there's not much reason. tons of $19 Fleabay ones out there already, and my cost in materials to make one is significantly higher than that. I simply wouldn't have any sales on them, so I don't bother making something that won't sell.

 

hey Matt, I noticed that most of your wires are 8 gauge while one is 4 gauge. Is there a big difference between 4 gauge and 8 gauge wire for grounding purposes? (compared to the CE kit)

 

bump. i just got a stage1 ltb shipped to my door and it came with 2 b!tchin stickers. i'm soooo anxious to go put it on... i have to go rub one out or somethin...

 

n3985, For the purposes of the ground kit, 4 awg is completely unnecessary for anything but the battery-to-block connection. Actually even 8 awg is overkill assuming you're running things correctly and to the proper locations. All these are doing is eliminating noise that's picked up by the thousands of feet of tiny wire going to the sensors in the engine bay. all of those long, tiny ground wires are acting as antennas for noise.. the BehmCo ground kit basically eliminates that noise by giving the sensors a much shorter and cleaner path to ground. The ECU then reads the sensors better, allowing the ECU to do its thing more efficiently.

it doesn't take 4awg wire to do that. you're looking at milliamps of current on these wires, and 4awg is good for something around 100A. kinda like swatting a fly with a sledgehammer type of thing.

the 4 and 8 awg wires are only because that's what customers think they need. if 12awg is good, then 10,8,4, or even 2 must be better, right? nah. it just gets in the way after a while.

 

everything ordered so far has been shipped!

 

hopefully you'll have a spring cleaning sale....I will be wanting the 2pc rotors come spring, once my holiday spending spree is recovered from

 

PM sent. . .


on a spring sale. Christmas is going to hard enough without me spending it on myself and the max.

 

What's the cheapest "BBK" you can sell me

 

Many thanks to Matt for bringing these great prices to the Org. I just ordered a Stage I Lower Tie Bar to complete "the box" on my front end and balance the effect of my RSB. Thanks to Irish44J as well for his many detailed posts on the subject. I searched, I read, I purchased. Maybe I will finally install those LCA E/S bushings sitting on the shelf as well. I am on a roll with mods. I installed my Cattman Y-Pipe last weekend and the weekend before was SS brake lines, Hawk pads and Dot 4 fluid. Thanks again, Matt!

 

Kev, what kind of BBK are you wanting, and how much do you want to buy yourself?


Gary, I don't see any emails from you regarding the 5th gen stage I?? :shrug:

 

Any upgrade better than stock. I can get up to speed but I can't slow down

 

Gary, looks like I'm having webhost problems... my email and blehmco website are on same server and I can't get to either right now. evidently it's been down for the last couple of hours... paypal shows the payment has gone through, but no email to me about it. thus the fun with lost orders continues like last Christmas when it did the same thing!!

if it's not up in the morning, I'm going to call my host and rip them a new arsehole.


Kev, your best bet will be the Z32 caliper w/ 2004 Max rotor.
brackets, lines, and hardware for that will be $190 shipped.
I have a set of slightly used OEM rotors if you want to go that way on rotors. PM me and we'll work out a deal on them. all you'll need then are Z32 calipers and pads.

 

i would love it if u could put together a Z32 BBK with the calipers, brackets, lines and cobra rotors. im in desperate need for this setup ! gd 19's

 

I don't use the Cobra rotors. I use the '04 Maxima rotors which are basically the same size and actually designed to fit these hubs.

I can do a full kit including everything you need for anywhere from $800 to $1300, depending on what rotors you want to use. Do you want IRotors or OEM 1-piece rotors, or my badass 2-pc rotors?

 

Matt-

Order placed - Money sent via PayPal. Check your PM.

Thanks.

 

On a 4th gen you have to install the stage 1 LTB first before you install the stage 2 kit, correct?

 

I see alot of 300zx calipers and rotors forsale, you think it is worth using the 300zx rotors too?

I also need to buy some wheels. Arghh, ima be soo poor

 

Kev, you can do the Z32 calipers and rotors after milling down the rotors 3mm. doing that costs you another $40 per rotor on top of the cost of the parts. by the time you replace the rotors again in 3 years, you'd almost be better off buying the brackets and rotors that bolt right on instead of having to custom machine every set of 300ZX rotors you put on it.


96BlackMaxSE, the Lower tie bar is either/or with my parts. The Warpspeed SFCs require a stage I before the II, but my lower tie bar is an either/or thing.

 

Which years had the Alluminum calipers? 93+?

 

90TT and all 91-92 models. they switched to iron in mid 93 or something.

I just order them for a '92 and it's all good.

 

Alright let me see if I can buy some 350z/G35 wheels this week and we will go from there.

The setup should clear 17" wheels right? Or 18" is needed?

 

17" should be fine. they fit on all but one set of 17" wheels I've used.
the G/Z wheels won't have a problem, as Jeff's Cobra rotor kit has even less offset and a tiny bit larger diameter- so if they fit on his car with that kit, then they'll fit with a Blehmco kit as well.

 

Must resist... Why do you have to do this to me Matt. I just bought my mom a maxima 3 weeks ago. Now I'm broke. I still have to look for some leather seats for her once I get some money. She doesn't like the cloth. Maybe I'll have money when you have your Spring Sale I know you gonna offer me free installation right.. haha
BTW... Loving the relocation kit. 1 yr and no problems.

 

depending on how much you buy, I might consider doing free install.

 

How much for the kit to mount 2004 brakes to my 2002? With rotors, calipers, and SS lines.

I looked on your site but it says only works for 2000 and 2001

 

can't relocate the 02-03 calipers to fit over the '04. just not enough room in there because the 02-03 are larger than the 00-01.
only thing I offer is the Z32 kit