Wil's95SE

iTrader: (3)

Please don't get my sig confused with a cf 95-96 front lip. I was only stating that Jose hasn't done a cf front lip for the 95-96 Max yet. He is waiting to sell a couple of regular front lips and bodykits for the 95-96. After the sale of these is when he going to make the cf front lip for the 95-96. I know some of you guys are anxious to get a cf one but trust me these guys are swamped right now. Be a little patient and you will have pics of the cf front lip soon.

MIXMAX

iTrader: (20)

Have you sold 5 kits? wondering if the $25 price drop has happened yet. Still sourcing funds, but will most likely be taking a full 95/96 kit off your hands.

cardana24

iTrader: (81)

I need the two peice rears for a 95-96. What is the difference in your design a stillen's? I will also need a price shipped to VA, 22901. Thanks.

kameron816

hey how much is the whole kit shipped to 92122?

ionicmax

iTrader: (30)

SBman182: The shipping will run 92 dlls.

Wil's95SE: Thanks for the support

MIXMAX: I have only sold two full kits on this GD, I've sold lots of individual parts, but few full kits.

cardana24: They are different, you will need to look up a few pics and compare them with my rear valances. My rear valances are lower and stop shorter.

kameron816: You are in San Diego, we can meet up and you can save money on the shipping. Please PM me so we can set something up.

Thanks guys!

kameron816

hey can u also tell me where i can get the kit installed in the san diego area? or u think u can do it for me if i pay u extra?

MDeezy

iTrader: (27)

Anyone paint there lip/kit themselves? Or know if the shop they painted your lip/kit used flex agent with the paint?

I'm thinking of purchasing this lip and painting myself. I know the poly urothane lips neede flex agent other wise they would crack at any small bump. Curious if this would be the case for Ionics lips? Its not made out of poly uerothane but its flexes like it.

If it does need flex agent then I'll just wait for the CF lip.

Is flex agent needed ionic? Its not like the lip would get bumps but maybe scrapes (thank you D2's)

DR-Max

iTrader: (3)

Good point, I'd like to know as well so that I can tell the shop that will be painting these to use the proper agent if necessary.

86maxima96

iTrader: (10)

just to be safe, but still save a few bucks, maybe just tell them to do the flex on the lip only? the sides and rear shouldn't be too big a deal for gettin bent as often. it's probably better to be safe than sorry with this one. it'll be cheaper in the long run, i think. but just my $.02

orleanzmax

iTrader: (8)

hey ionic. i test fitted the kit. i ran into the same problem. the rear seems to not fit. there is a huge gap on the side.the pic everyone have sen is similiar to mine. im try to sand it down to get it to fit flush. front and side fit very well. last is i got a question on the rear. i see that they have a mold screws in the bumper reinforcement brackets. b/c they don't seem to interfere with them. only problem i ran into guys. this is a great buy. gettem while there hot.

ionicmax

iTrader: (30)

MDeezy: It all depends on if you have done this type of work by your self in the past then I would say that it won't be difficult for you to paint these because these are not that big. I would recommend a flex agent for the front, just in case you bump into something your paint will not flake off.

DR-Max: I do recommend using a flex agent on the front lip ONLY, it should not raise the price very much.

orleanzmax: try to get some screws from the underside where the small gap is, the presure will close that gap

Thanks guys!

MDeezy

iTrader: (27)

Yea I've done this type of work before.The lip isnt that big, plus you stated is already primed, so some light sanding with say 2000 grit should have it nice and ready for the paint to adhere. I'll order this lip and paint myself, my front bumper need painting soon so when I get that done, I'll have the lip done at the same time.

I'll PM you ionic with my info to order the lip, would it ship today?

MIXMAX

iTrader: (20)

Is the whole kit primered? or does it still have a mold release residue on it?

kameron816

hey jose did u get my pms?

MDeezy

iTrader: (27)

tried PM'ing your Ionic but your box is full.

ionicmax

iTrader: (30)

Inbox cleaned

MIXMAX

iTrader: (20)

still waiting for an answer?

maximabebe

iTrader: (24)

Actually in my sig pic I have an Ionic dynamics carbon fiber 97-99 lip that was modified to fit my 95 and painted body color, Thanks. I think I would know. I don't give Stillen my money.

ionicmax

iTrader: (30)

MIXMAX: Slight residue might be present, please keep in mind that with a spray on primer or a gel coat primer you will still need to do sanding for proper prepping and paint adhesion.

What did you do to get it fit ?

Thanks guys!

metallic97gxe

iTrader: (3)

more pics just for looks

maximabebe

iTrader: (24)

Just beneath the lowest gap in the lower middle of the front bumper, I cut a long thin horizontal strip with an angle grinder. Therefore, I was able to slidt the upper portion of the lip into the slot and screw it down to the inner part of the bumper using a hollow aluminum spacer to fill the gap and also give it a tight fit.

Kevlo911

iTrader: (36)

Also more pics

cardana24

iTrader: (81)

would these rears match up with stillen front and sides? The reason I ask is because I already have the stillen front and sides, I am looking for rears now, and I am having trouble finding them used so now I am considering either buying these new or getting the stillen rears new. Any insight?

blackmaxx96

iTrader: (23)

I'm jealous of all these pics!!!!!

Indymax

Ionicmax,

How much for the entire 96 kit shipped to 46845?

Did you ever find out how the FRP holds up in cold weather?

Thanks.

MDeezy

iTrader: (27)

Hot damn, kevlo! Car is definately looking sick. Looks like they a good job painting the kit, and the install almost looks like its molded on (front lip I mean).

MaxxedOut624

iTrader: (2)

Email sent regarding 96 front lip and 2-piece rears. Also I want to know more about the CF lip available.

cardana24

iTrader: (81)

bump for this question ionic...thanks.

D-Bo

iTrader: (9)

Lookin good Kevlo!

vsamoylov

i think everybody does

ionicmax

iTrader: (30)

Thanks for the pics guys

Indymax: My supplier said that flexibility will be reduced because of the cold weather, but that the parts should hold up very well. I also contacted a customer in Canada and asked him how it was holding up and he said that's it's ok. The shipping would only be $92.

MaxxedOut624: Email sent back.

cardana24: I have seen these rear paired up with the stillen sides, but I can't find any pics. This is the best I could do, it's my rear valance paired up with the skyline side skirts that are similar in size as the stillen sides: http://www.cardomain.com/ride/560141

Please let me know if you guys have any more questions.

Jose.

stronium_95se

iTrader: (1)

still no pics of the 95-96 CF kit on the max?

MIXMAX

iTrader: (20)

Check your PM

mershonmc1

is the deal still going on,if so , how much for the new 97-99 in frp shipped to 30087

ionicmax

iTrader: (30)

Hi guys!

I'm getting a lot of PM's and emails from orgers that need a little more time to gather up the funds for the GD because of spring break, so I am extending the GD for another two weeks

MIXMAX: PM responded to.

The lip will cost you 160 shipped =)

DR-Max

iTrader: (3)

Yo Jose, did you get my Paypal payment???

mershonmc1

how much for the whole kit with the new 97-99 lip in frp shipped to 30087

ionicmax

iTrader: (30)

DR-Max: Yes, thanks for the purchase, the lip will be shipped out later this week.

Your grand total will come out to 465 shipped. Please let me know if you have any more questions

DR-Max

iTrader: (3)

Sweet......thanks bud!

MDeezy

iTrader: (27)

sent you a PM ionic