FUJITA Cold Air Intake for 04-06 Maxima WRINKLED BLACK FINISH
02-18-2007, 10:03 AM
#123
I recently just got a 2007 Nissan Maxima. I see that in your posts, it only states that the CAI works for 04-06 Maximas. Would the intake fit the new 07's, or am I going to have to wait until the new model is released? I hope this question wasn't already covered. I read through the thread, and didn't see the subject. Thanks.
02-18-2007, 05:34 PM
#124
Junior Member
Join Date: Feb 2007
Posts: 28
Originally Posted by EMAXX
I recently just got a 2007 Nissan Maxima. I see that in your posts, it only states that the CAI works for 04-06 Maximas. Would the intake fit the new 07's, or am I going to have to wait until the new model is released? I hope this question wasn't already covered. I read through the thread, and didn't see the subject. Thanks.
02-18-2007, 11:49 PM
#126
Unfortunately this will not fit the 2007 Maxima mainly because the location of the bracket is different from the 04-06.
However, the Fujita CAI for the 2007 Maxima has been in production already. I will let everyone know when it is available.
However, the Fujita CAI for the 2007 Maxima has been in production already. I will let everyone know when it is available.
02-22-2007, 03:33 PM
#131
Take 2 pictures of your car and send it in to Fujita for a chance to win $200.
For more info click here: http://f5air.com/f5cgive.html
02-25-2007, 05:11 PM
#134
Can you please provide us with your email address? We will send you a paypal invoice. You can post here, private message us or email us at sales@ridetuner.com
Thanks!
Thanks!
03-02-2007, 11:36 AM
#137
Originally Posted by Kashanova
03-07-2007, 05:37 PM
#141
Payment received, thank you! Your intake will ship out tomorrow.
Yes, detailed instructions with pictures are included to guide you through the installation process. Feel free to contact us at sales@ridetuner.com if you run into any questions.
Yes, detailed instructions with pictures are included to guide you through the installation process. Feel free to contact us at sales@ridetuner.com if you run into any questions.
03-08-2007, 04:07 PM
#142
Member
Join Date: Feb 2007
Posts: 139
Originally Posted by RideTuner
Payment received, thank you! Your intake will ship out tomorrow.
Yes, detailed instructions with pictures are included to guide you through the installation process. Feel free to contact us at sales@ridetuner.com if you run into any questions.
Yes, detailed instructions with pictures are included to guide you through the installation process. Feel free to contact us at sales@ridetuner.com if you run into any questions.
03-20-2007, 08:59 PM
#147
Originally Posted by RideTuner
I will set up another group deal as soon as our next shipment arrives.
SWEET! dude, is it me or does the polished one have a dual position mounting bracket while the wrinkled black only a single position mounting bracket.
Also do u sell just the replacement rubber attachment screws that attach to the fender well?
Thanks,
Kam
03-20-2007, 09:10 PM
#148
Both finishes have one single point mounting bracket. Its not necessary for 2 =)
Both finishes are in stock and ready to ship.
Did your rubber vibration mount disassemble? If so it is covered under warranty. If, send me an email with your warranty number that can be found on the warranty sticker on the exterior of the box the intake came in and your shipping address. I will ship you one asap.
Both finishes are in stock and ready to ship.
Did your rubber vibration mount disassemble? If so it is covered under warranty. If, send me an email with your warranty number that can be found on the warranty sticker on the exterior of the box the intake came in and your shipping address. I will ship you one asap.
03-20-2007, 09:12 PM
#149
sorry I just realized in your sig you have injen cai. We don't normally sell the vibration mount by itself but we can. I'll let you know the price when I get back in my office tomorrow. 
03-21-2007, 05:34 PM
#151
Originally Posted by Snolife
I sure wish you guys did this for 5.5 Gens. I would be all over this.
03-31-2007, 09:07 PM
#152
Nations 1st 6th Gen Turbo
iTrader: (15)
Join Date: May 2005
Location: Displaced New Yorker in Southern, MD
Posts: 10,202
Originally Posted by RideTuner
Sorry, if it is available in the future I will be sure to let you know. =)
04-01-2007, 02:23 PM
#155
We have not had any complaints with emissions. I personally have one in my 04 Maxima and passed emissoins with no problems in MD.
The current CARB aaproval status for CA is pending and should be approved soon. As soon it is approved we will contact you and Fujita will send you a CARB approved emblem to directly to attach the your intake pipe.
The current CARB aaproval status for CA is pending and should be approved soon. As soon it is approved we will contact you and Fujita will send you a CARB approved emblem to directly to attach the your intake pipe.
04-06-2007, 05:57 PM
#158
BUMP for one sick CAI. Kamski you will love it and so will you Chern
I had that mount dissasemble on me. You call FUJITA send them a pick and new one is on the way. Eventually I'll have to manufacture something on my own.
I had that mount dissasemble on me. You call FUJITA send them a pick and new one is on the way. Eventually I'll have to manufacture something on my own.
04-06-2007, 09:13 PM
#159
Supporting Maxima.org Member
Join Date: Jan 2003
Posts: 281
I just received mine Thursday, and installed it that night. Wow. Sounds wicked. I went to the track tonight to make some runs, but there were over 500 cars since the weather is so cool. So, I turned back around and went home. =( I can't wait to see what this thing does to my times.
05-14-2007, 08:00 PM
#160
Senior Member
Join Date: Jan 2006
Posts: 210
Originally Posted by stealthmax
I WANT ONE OF THE BLACK WRINKLE INTAKES!!!
ILL TAKE DIBS TOO.......... IM IN FLORIDA NOW. I USED TO LIVE IN ROCKVILLE,MD!!!!!!!!
EMAIL ME AT onefastwrx555@msn.com
im new on here and cant PM yet
ILL TAKE DIBS TOO.......... IM IN FLORIDA NOW. I USED TO LIVE IN ROCKVILLE,MD!!!!!!!!
EMAIL ME AT onefastwrx555@msn.com
im new on here and cant PM yet