Email replied to!

 

Just like our other gens of sfcs The price $330 shipped this includes both side rails. A middle cross section and an adjustable x brace system. This GB will only run 15 sets for the first run and we will ship out within a week of payment regardless of # of orders.

You need to supply us with the Gen you have in your order. As well of course we
need your name and address to send these out.

PayPal to truaxmotorsports@gmail.com

Thanks,

The crew at TMS

 

Very nice.. do you have any pics of them installed? I'm ready to buy ASAP

 

Yep, +1 for pics.

 

We will have pics up tomorrow.

 

Weren't the other Gen's $265+ Shipping which made them around $300 all together, not to sound cheap but $30 bucks it alot when ur a broke college student. Any ways can't wait to see some pictures up! When do you plan to ship the first batch out?

 

... i have a full 3" exhaust from the turbo back, will this make it so i can't bolt it up? my exhaust is rather large


will it still fit?

 

The cross bracing most likely not. I can make you one that will but it will be lower than the rest of the kit. The siderails would still work just fine.

 

would sit lower then what kit?
the body of the car?
still the same price $330?

 

He means the cross bracing would sit lower than the rest of the subframe connector kit (ie they'll sit lower than the side 'rails')

Still waiting for pics will pay ASAP just want to see the clearance

 

Ditto ... Any Pictures..?

 

TMS guys: can I get an order confirmation or a reply to my emails or something? I've heard nothing since paying on Tuesday.

 

so you will make them? or you can ...
is it going to be part of the group buy? and will it be just as ridgid

 

They are made just dont have any pics at the moment of them on the car. You do loose some clearance in the rear mid part of the main rails with these about 3/4".

 

You have a new Email.

 

Much appreciated; thanks!

 

Not a problem I hate being left in the dark as well.

 

Do these need to be welded on or are they bolt on?

 

They are weld on.
I promised pics better late than never right?





http://i41.photobucket.com/albums/e2...IC_0002-14.jpg
http://i41.photobucket.com/albums/e2...IC_0001-12.jpg
I didnt install an X brace on that car. therefore theres not one in those pics. I did mock up a center piece on it in one pic just for the visual though.

Thanks for putting up with me,

Sean

 

so about these, how much MORE will it be for the cross peice? and ifit doesnt end up fitting will it be refundalbe?

 

These are 309 shipped for side rails and non adjustable x brace and 330 shipped with adjustable cross bracing. I think I can make you a cross section that will clear. Could you get a clearer pic of the center of the exhaust directly behind were the cat used to be.

 

Just curious, why are they painted red? And, what are the front and rear flanges for? Are there other cross braces that use those flanges? And, by "adjustable cross-brace" do you mean that it would be movable or even removable in order to change or service the exhaust system? Thanks.

 

Hello Guys,
The reason we painted them red was we wanted them to really show up, and red was on sale.
The tabs will be used to bolt on the adjustable cross brace. It can easily be removed to work on your exhaust system. Sean told me he plans to use a very similar cross brace system that we are currently using on the 4th and 5th Gen. This is a great system that works and is very strong, yet light. Total weight is around 40 lbs.
My daughter had rave reviews if it counts. She said what every one else has already stated, less rattles, cars feels much more solid and she also noticed she was able to drive faster going on and off exit ramps, and curvy roads.
Still wish I had my old 3rd Gen, she had over 200K and still didn't use any oil. My best car ever and I have owned around 50.
Please let us know what else you guys need to know about these. We will be back at full strength in the shop next week so we will be cranking out a bunch and prototyping several other cars as well. We anticipate minimal lag time once ordered.


Dan TMS

 

so the new up grade will let you just bolt it on with out have it welded on ??? and is it the same price ??

 

No these still need to be welded on. The upgrade is for One bolt location for alignment of the rails ensuring a good fit everytime. The extra upgrade that costs a bit more Is adjustable X-bracing allowing you to preload Your chassis.

Sean
TMS

 

By adjustable it means the X bars are adjustable in length much like a turnbuckle. We also offer the x bracing non adjustable for 309 shipped. If you dont care for that option. And the flanges are for mounting the X braces to. I didnt install the full X brace on dans daughters car for many reasons. (mainly the value vactor of the car itself, breaks down alot and barely wants to run anyway)

Sean
TMS

 

Good job. I'll be placing my order in about two weeks. Can't wait.

 

For all three gens that we offer. Yes 3rd 4th and 5th. We are running a sale going from now until maxus. The deal is for a complete set with the x bracing. (non adjustable) for $275 shipped.

This special is only good until maxus. There is no number limit on the people that can get in on this one.

Please give us a full 10 days to have your set shipped for this offer.

Thanks,

Sean

TMS

 

I'd love to get on this. What do I need to do? I have a 4th gen.

 

maxus = Christmas??

 

June 22nd...

Hopefully I'll have the $$ before then.

 

So if these are for the non adjustable, are you offering an adjustable set as well? If so what are the benefits of the adjustable set?

Thanks!

Great Price!

 

This deal is for the non adjustables. The adjustable sets are much more labr intensive. The advantage of the adjustable ones is being able to add or subtract tension to any given corner of the connectors.

To get in on this deal you can send 275 to truaxmotorsports@gmail.com via paypal, and include your name and address as well as your org name.

Thanks,

TMS

 

Do you have the bugs worked out of the 5th gen ones yet. I am lloking at getting these. There is a srt4 that's in the local forum I am a memebr of that has you connectors too.

 

Yup and for $50 I can install them for you if you want to treck up to st.cloud. Yeah Scott really likes The ones we put on his srt4.

Sean

 

I can do that.

 

Alright shoot us an email. truaxmotorsports@gmail.com

We might be able to do it this weekend if your available.

 

so if i wanted the a set with the adjustable x brace its 330, and all i have to do is send you some pics of the cat area back? or just the car area? or near the side of the car where the exhaust hugs? just let me know, if i dont get this by fri/sat, ill just post up about 5 more pics.
and how long for you to make that peice?

 

will you do the group deal for the adjustable ones? and for my situation, will i be able to get in on it? >(turbo 3rd gen with the 3" exhaust)

 

this deal is for the non adjustables, simply due to the labor intensity. And yes if you want it custom to fit a 3" that shouldn't be too much of an issue.