slider, like a sliding bulb that moves back and forward or up and down.

 

what would the total be if i wanna add a pair of 6k D2R bulbs?

 

$50 more for those bulbs.

 

Paypal sent for 6000k (bright white)

 

are you ok with $190?

9008 HID kit
H11 HID kit
a pair of D2R HID bulbs

all in 6k and shipped to Canada declare as replacement parts for like $30 in value

 

ok with $195 but we'll do the other request.

 

i was wondering, does the kits supposed to come w/ mounting kits? i just received mine and no mounts.

also, on the bulb side, there are 2 wires, red and black, where do they connect to?

**edit** was i supposed to specify the car i have? or it doesn't make a difference?

i have 04 sentra ser specv.

 

They don't come with mounting - but usually DS tape or velcro works perfectly
Those 2 wires attach to your existing connector if you need to use them, if you have 9006, you don't need to do anything except plug it in.

 

thanks. I'll be installing them this weekend. most likely saturday. I'll let you know the how it goes.

later

chris

 

I'm looking for a 6000k kit.....I have aftermarket halo headlights, with 9006 bulbs in a 2001 max. Below is a pic of the back of the headlight.

Can you tell me what kit I would need, and does it come with the relay? Also, can I still retain high beam halogen functionality with the kit installed?

 

that actually looks like an h3 or H7, pull the cap off, what does the bulb say on it.

 

its a 9006 bulb that has the harness to fit into my stock H4 connector

 

No problem, we can do that.

 

come with relay installed? And high beam halogen can still be used, correct? (gotta be able to pass inspections)

 

you don't need a relay the high beam will still be used.

 

question? i was installing mine and i noticed that the part next to the bulb. like the white line thing, is cracked on it. they both still work, but would i be able to get a new one?

lmk

thanks again

chris

 

Please send us a photo, it's probably fine.

 

Ok, so I need two 6000k 35w slim digital, at $85/ea = $170, correct?

Kit 1 - H3 bulbs and connectors
Kit 2 - 9006 bulbs with H4 connectors (aftermarket headlight uses 9006lows and plugs into stock 2001 H4 harness)

How/where would you like me to specify this when I order?

 

Order status? Thanks

 

in the comments. That's correct.

We can't easily do order status via user names, but if you email us, we can look up your order.

 

Email sent

 

Payment sent for 6000k H3 kit and 6000k H4 kit (with 9006 bulbs).......

 

Alrighty partner, you'll be seein your order shortly

 

Pay attention, he paid us, we have shipped the product.

 

sshhhhhh, don't tell him...
got your tracking number

P.S. Why the he11 is Operatic replying in the Umnitza thread? lol

 

 

i am looking for 6k 9004 hid kit with h4 amp connectors. would this setup be part of the 50$ hid special as well? thanks

 

looking to buy 55w h4 bi xenon hid kit 6k or 8k how much?

 

Quotes for both the 35w and 50w for H3 kit in 6000k shipped to 78660?
Also, are these slim kits?

 

i need 6k 9007 for my sentra...you get those in the 55w? is the middle one for hi+lows?

 

IGHT
any h3 and h7s? 8 k for both

and h3 3k
h3 12k

 

Thanks Umnitza for the 8k fogs!

 

Thanks
I just love how the competition is rating this thread with only 2 stars

 

My 6k headlights and 8k fogs from you works perfect!

 

Hey boss, I've got a question about installing the kit I just received...

I'm a little confused as to how I'm going to install the low beam bulbs. Your setup doesn't allow me to seal the black cap on the back of the headlamp assembly.

Here is the pic I posted prior to placing my order...


Also, are these two sets of wires for an optional relay, or am I overlooking something?

 

You have to drill a 1" hole in the back cap.

 

well that blows...how bout those two wires in the 2nd pic?

 

those will be your adapter wires and will go through that same hole that will be covered by the grommet on the bulb.

 

hmmm, I'm not sure what exactly they are going to adapt to. Take a look how I have this set up and let me know what I'm doing wrong. Apologies ahead of time for my electrical stupidity, but I don't want to start splicing/cutting wires incorrectly and turn this into a 4hour install. Maybe this will even save you time in explaining to someone else in the future.



H4 adapter - plugs into factory H4 harness
1 - splice to high beam
2 - splice to a ground/ground to frame
3 - plug into factory H3 fog harness
4 - splice to a ground/ground to frame
5 - ???
6 - ???
7 - ???

 

I need some new bulbs (5 or 6000K) to replace my stock ones and a quote for HID Fogs while you're at it. All Shipped to 32514. Thanks!