That's my car.. yea, those are just painted altezzas..

 

which altezzas did you use and what kind of paint? is there a write up or is it just painting them......

 

I did mine a while ago, read this . And search for something like "altezzas" or "skyline tails".

 

]


That website doesnt work

 

ok, try this one instead. and do a search for "skyline tails" with WaydeMax or FJC in the screename and in the 4th gen forum. there were a couple good threads on it a lil while ago.

 

Sweeeeet! finally another car like mine

Do you have any more pix of the sides rear and front? how is rear doing with the muffler hole so far?

Looking gooood! Oh yeah, are you lowered?


Also, who installed the kit for you? IS it bolted to the bottom of the frame(the side skirts)? Is it glued? How is the drivers side door doing, is it scratching the side skirt? Cause my driver side door was sagging from years of opening and closing and had to be lifted.

 

rear section for 97-99 for sale 90 dollars plus shipping
http://groups.msn.com/_Secure/0LACvD...fhaMg/rear.JPG pm or email me with offers


mike

 

UPDATE!!!!


The two piece rear valance for the 95-95 Maxima is now available. The prototype is finished and the first pieces should be ready to ship by Thursday

Thanks!

Jose.

 

im going to have to see a side/rear view of a lowered max with a stillen lip and Ionic sides and 2 pc. rear. Anyone yet?

 

With luck Wizzamax will be able to take some pics of his side skirts and two piece rear valance, and his max is lowered.

Thanks!

 

the pic i just posted was of a lowered max but I did take off the stillen side skirts

 

I promised Jose I would get him some high quality shots...credits and kudos to 8702 for the pictures...

Large right rear shot

Large left rear shot

Large front right shot

 

sweeeeeet pix!! ULTRA MEGA HIGH RESOLUTION!

took me 3 minuts each picture to download

I wish my pix were that good....

Great pictures, now you need a new sig

 

damn I am definitely getting the kit now. One thing though Is it me or does the back not look like its lined up properly or attached properly or not flush or something.

 

hey Wizza, i took your rear shot and made the rear pieces molded

I went a little crazy and took off the bumper lines...and went even crazier and took out your gas tank-lid

I dont know...here it is:

http://mozy.cx/images/molded-rear.jpg

oh yeah, i tried molding the side skirts so that they look more flush to the doors, but it didnt work...im not good enough yet.

Thank god for airburshing

 

sweetness! now i just need to see how the 95 rears look and i will probably get it, also wizza how much are you lowered? im at 2 inches so im still a little worried, but i think the front lip is the only piece that would really get scraped up

 

How well would the 97 Ionic 2pc Rear match up with stillen sides? are the ionic rears lower than the stillen sides? I think I want to try something a lil different because I like the way the stillen sides match the lip but the Ionic rears seem to look fore agressive and more pronnounced than the stillen rears. Photoshop experts??

 

Wizza, If it not too much to ask but do you have a side shot of the car? also, how low are the sides compared to the lip?

 

the rear is a little bit larger then the stillen sides but not too much, it matches up pretty well if you ask me, and the ground clearance isnt a problem, I am lowered and the only problem i had was the front lip nothing else

 

I haven't been able to take any more pics because I've been swamped at work and at home. I will try to get some soon. The muffler hole is doing fine thing is, the place that installed the kit for me f'ed up around there so there is a gap by the muffler hole... I had planned on fixing it myself but never found the time. It is held on by screws. I told the guy i wanted to be able to remove it easily whenever I wanted. I haven't had any problems with the sides that I know of.. Now that you mention it, I will have to go check ...

 

this may be already answered and discussed, but does the kit come predrilled? thanks

 

If you would like it to be predrilled then it will come that way. I have had some buyers prefer to have the installer make the holes to ensure a perfect fit.

Take care!

 

ionicmax, I sent you a PM.

 

another question about mounting, ok i can ask for predrilled or not, but what about mounting tape? is it already attached and ready to go?
thanks

 

The mounting tape is not necesary. I have no tape on mine and haven't had any problems.

Take care!

 

so just screws?

 

You're gonna need your own screws...possibly some very very very very very very thin mounting tape for the side skirts???

my installers used glue, so that worked real well (untill the time when I tried to take them off for a sec)...I would be pretty afraid if the side skirts were held on with only two screws one on each side.

 

Is there any PICS of the 95-96 Rear yet..I need to seeee it

 

The two piece rear valance is going to look the same as the 97-99 one.

Sil SE: About the mounting, the side skirts come pre-drilled on the back for three screws and two in the front, so I'm pretty sure that they will stay in place!

The kits are still for sale!

Thanks!

 

How Much for the 95-96 rear pieces.. Does anyone have them yet?

 

120+shipping

 

Sorry to be a pain but can you get these painted also if so how much?

 

r u guys going to make one piece for 96 maxima i really want that..........please guys

 

please make one piece for 96 max....i want one

 

Whoa, so does this mean the 2 piece rear for 95-96 are now available?! If so, then put me down for a pair Ionicmax. E-mail me with the info you need.

 

Yes, you have to email Jose at ionico@hotmail.com in order for him to tell you the price, it depends on the color of your car. If you color is Pearl White, it will be more expensive than Super black.

Yes, you have to e-mail Jose at ionico@hotmail.com he isn't able to check this thread everyday unlike his email.


About the 95-96 one piece, if I recall correctly he is working on those also, stay tuned for his answer.

 

I take it there's no pics yet....

 

MikeD95SE:

Please shop me an email at ionico@hotmail.com with your model year and paint color. It should run you about 80 dlls.

Sorry guys I don't have any pics of the 95-96 two piece rear valance yet, but they look the same as the 97-99 two piece. And yes they are available

About the one piece for the 95-96 model it's going to take a while since I don't have one to work on

Thanks!

 

your killing me with shipping. shipping almost costas much as the valence

 

What pieces are you interested in? I though you wanted the side skirts painted

Since any order that has the one piece rear valance has to be shipped via a freight company the shipping is going to be a bit high, like 75-85 dlls. The shipping will cost you the same if you get the side skirts at the same time if you can find a place where I can ship them at a better price then drop me a note.

Take care!