How to Chang Fog Lights on a 96 I30t
#1
How to Chang Fog Lights on a 96 I30t
Does anyone knows how to change the foglights on a 96 Infiniti I30t. If anyone has done this before or has access to a repair manual you help will be appreciated.
Thanks Guys!!
Thanks Guys!!
#2
I don't have a manual or anything, but I switched out the foglights on my I30 a while ago. It is kind of hard to do it when the car is flat, so if it is possibly to safely lift the front end somehow, whether it be by jacking it up or driving onto a ramp, I'd suggest that. I also needed a socket set because there is a piece of plastic underneath that protects the area, and it is held on by bolts I believe. Once you reach the area inside, taking out the old bulbs and putting in the new ones is pretty much like changing your headlights.
Someone feel free to correct me if I missed anything, I did this about 7 months ago so I may have forgotten.
Someone feel free to correct me if I missed anything, I did this about 7 months ago so I may have forgotten.
#3
Originally Posted by infintishock
I don't have a manual or anything, but I switched out the foglights on my I30 a while ago. It is kind of hard to do it when the car is flat, so if it is possibly to safely lift the front end somehow, whether it be by jacking it up or driving onto a ramp, I'd suggest that. I also needed a socket set because there is a piece of plastic underneath that protects the area, and it is held on by bolts I believe. Once you reach the area inside, taking out the old bulbs and putting in the new ones is pretty much like changing your headlights.
Someone feel free to correct me if I missed anything, I did this about 7 months ago so I may have forgotten.
Someone feel free to correct me if I missed anything, I did this about 7 months ago so I may have forgotten.
#4
Step:
1. Jack up the car.
2. Engage parking break
3. Unscrew the plastic undercarriage protector
4. Locate the foglight bulb
5. Undo the metal spring holding the bulb in place.
6. Disconnect the wires.
7. Put in new bulb
8. Connect wires.
9. Put the metal spring back in.
10. Screw the protector back in.
11. Disengage parking break.
12. Unjack car.
*EDIT* Be very careful not to apply excessive force to the plastic protector screws. I broke 3 of mine because they were practically rusted through. I would just recommend buying new screws and replacing the old ones while you are doing the swap.
1. Jack up the car.
2. Engage parking break
3. Unscrew the plastic undercarriage protector
4. Locate the foglight bulb
5. Undo the metal spring holding the bulb in place.
6. Disconnect the wires.
7. Put in new bulb
8. Connect wires.
9. Put the metal spring back in.
10. Screw the protector back in.
11. Disengage parking break.
12. Unjack car.
*EDIT* Be very careful not to apply excessive force to the plastic protector screws. I broke 3 of mine because they were practically rusted through. I would just recommend buying new screws and replacing the old ones while you are doing the swap.
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 12:46 PM
Viralkill
7th Generation Maxima (2009-2015)
1
08-17-2015 10:54 AM
98nismomax
4th Generation Classifieds (1995-1999)
0
08-13-2015 12:44 PM