I had my belts changed out at this place called brakes plus here in colorado while i had my alignment done. The job for replacing the belts was a shade over 100 bucks but due to the crazy weather and time constraints from school, I submitted and gave them the go.

after they replace my serpentine and power steering belts, the engine from the inside of the car seems to "woes" when in drive and at idle. This "woe-ing" sounded suspicious to me so I took it back 15 minutes after i drove it off there lot. I told the guy that the "woe" sound wasnt there before but now after they change the belts out its there and can definitely be heard when the car stereo is off. the guys checked it and said that its my bearing?? WTF is that all about?

I'm hoping that a can of belt spray from a local pepboys shop would help do the trick to quiet the belt "woe" noise sound. If not...what shall i do guys?

 

Did you even check your belts? What "bearing" is your mechanic referring to?

 

Might be too tight or too loose!

 

I agree, just play with the Tensioner nut, i'd loosen it a little first (not too much) then start the car. See how it sounds. If not then go the other way.