A32 JDM Cefiro Dual Piston Caliper w/ JDM Nissan Brake Pads
I had sold few of these and just want to put it out there and let ya'll know.
These are used in JDM Skyline R32, Silvia S13, Laurel and Cefiro A31, A32. I do not think this applies to A33 though..

Advantage:
Better Brake Response (2 Piston JDM Cefiro Front brake Caliper)
Cheaper upgrade - Can fit in Stock 15, 16" Wheels (Cheaper; so you don't need to upgrade your wheels, cheaper tires).

If you want a BIGGER Rotor, I can source a adaptor bracket later on.

Please see the photos for your reference:

 

Please feel free to ask me any question you might have.
Working hard for both A32 and A33 community.

Regards,
SY
sycefiro@yahoo.com

 

hmmmm.... how much are these running? and how much are the pads running alone?

 

The pads won't fit your USDM stock A32/A33 Caliper. The JDM Nissan OEM pads are about U$145~155+ shipped for the pair (I am assuming you are asking for replacement).

Buying these Caliper Kits (including Pads) along, they are about U$499+ S/H (my other customers paid about U$550 shipped Int'l Priority SH)..

These are FRONT's only.

I was reading that A33 has thicker rotors than A32, unless you want to use A32 Rotors... this is NOT recommanded for A33... If you are doing an upgrade for A33, you might wanna consider going 6th Front Brake conversion.. BIGGER ROTORS, and 6th Gen Calipers.. but you will of course need BIGGER wheels to accomodate these

I am working on getting these along with SS brake lines..(but JDM SS lines are very expensive). Working on 'em right now.

I'd recommand to go with Goodridge SS Brake lines.
You can use your A32 Stock size Rotor (OEM or aftermarket).
I was told that these will work with Steel Wheels (aka GXE wheels with wheel covers)

If you are plan on going bigger Rotors, it's possible. I am working on getting the adaptor brackets right now....
But you will need BIGGER wheels to make sure you have the caliper clearance.

SYCEFIRO

 

**** how much does this run, and i take it my 97' i30 is a32

 

Please email me

sycefiro@yahoo.com
Thanks
SY