03 SE - lightly modded..
03 SE - lightly modded..
Stillen aero kit / classic lip
35% Tint
Cleared Headlights
Umnitza DDE Angel Eyes
Clear front side makers
Clear spoiler brake light
Magnaflow 3" Tips
GAB / KN Filter
Advanced Timing
Hayden Trans Cooler
Progress RSB
eBay FTSB
Eibach springs (front only/stock struts)
More on cardomain...
35% Tint
Cleared Headlights
Umnitza DDE Angel Eyes
Clear front side makers
Clear spoiler brake light
Magnaflow 3" Tips
GAB / KN Filter
Advanced Timing
Hayden Trans Cooler
Progress RSB
eBay FTSB
Eibach springs (front only/stock struts)
More on cardomain...

it'll probably stay like this for a while. maybe when it's time for new tires i'll switch it up. at some point headers and the rest of the plumbing will get done (FI for the 3.5L doesn't seem tempting..yet), bbk is also on the map. but for now i'm good to go.
Originally Posted by BP
Stillen aero kit / classic lip
35% Tint
Cleared Headlights
Umnitza DDE Angel Eyes
Clear front side makers
Clear spoiler brake light
Magnaflow 3" Tips
GAB / KN Filter
Advanced Timing
Hayden Trans Cooler
Progress RSB
eBay FTSB
Eibach springs (front only/stock struts)
More on cardomain...

35% Tint
Cleared Headlights
Umnitza DDE Angel Eyes
Clear front side makers
Clear spoiler brake light
Magnaflow 3" Tips
GAB / KN Filter
Advanced Timing
Hayden Trans Cooler
Progress RSB
eBay FTSB
Eibach springs (front only/stock struts)
More on cardomain...

thanks for the comments guys. here's some more pics i took this evening.
short answer...i wanted the drop as even as possible.
plus my max always sat pretty low in the back from the start. after i installed the front springs and took a look it was exactly how i wanted it. the front wheel well sits slightly lower (about 1/4") than the rear. some people have reservations about dropping the front only (especially on stock struts) but in my experience with the eibachs (more of a moderate drop) the ride is very compliant, more stable/firm with much less roll/float, and steering is fairly nuetral with predictable understeer. i think the RSB, FSTB, and a decent set of tires contribute to this setup well.
Originally Posted by Nathan
Why did you choose to lower only the front?
plus my max always sat pretty low in the back from the start. after i installed the front springs and took a look it was exactly how i wanted it. the front wheel well sits slightly lower (about 1/4") than the rear. some people have reservations about dropping the front only (especially on stock struts) but in my experience with the eibachs (more of a moderate drop) the ride is very compliant, more stable/firm with much less roll/float, and steering is fairly nuetral with predictable understeer. i think the RSB, FSTB, and a decent set of tires contribute to this setup well.
Thread
Thread Starter
Forum
Replies
Last Post
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
Sep 8, 2015 12:02 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM




