3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

I can't open the passenger front door!

Thread Tools
 
Search this Thread
 
Old Oct 22, 2003 | 11:26 AM
  #1  
JamesDwan's Avatar
Thread Starter
Member
 
Joined: Oct 2003
Posts: 44
I can't open the passenger front door!

I have a '91 Maxima. The other day the door just refused to open (as I was dropping off my wife at her office). It still won't open! I tried taking off the door panel to get at the inside, tried the keyless enty-nothing worked. I am convinced some little plastic catch has broken. Does anyone have any suggestions?
Thanks in advance for any help on this matter.

JamesDwan
Old Oct 22, 2003 | 11:45 AM
  #2  
Maxima-4DSC's Avatar
YoU CaNt SeE mE
iTrader: (1)
 
Joined: May 2003
Posts: 3,433
From: Jersey
so the doors locked and wont unlock ? if the rod is broken on the inside your going to have to lower the window and get in there with something to unlock it. either a lockout kit or a coat hanger !
Old Oct 22, 2003 | 11:48 AM
  #3  
KLoWnPR109's Avatar
Supporting Maxima.org Member
iTrader: (9)
 
Joined: Aug 2001
Posts: 3,515
From: Irving, TX
one word ===>> crowbar

When you pull on the handle, is there resistance? Or does it just flop around?
Old Oct 22, 2003 | 12:12 PM
  #4  
JamesDwan's Avatar
Thread Starter
Member
 
Joined: Oct 2003
Posts: 44
Originally Posted by KLoWnPR109
one word ===>> crowbar

When you pull on the handle, is there resistance? Or does it just flop around?

There is no resistance, and the door lock moves up and down like it should
Old Oct 22, 2003 | 12:14 PM
  #5  
JamesDwan's Avatar
Thread Starter
Member
 
Joined: Oct 2003
Posts: 44
Originally Posted by gowirelessnj
so the doors locked and wont unlock ? if the rod is broken on the inside your going to have to lower the window and get in there with something to unlock it. either a lockout kit or a coat hanger !
The locks go up and down when I lock/unlock the car. I opened up the door panel & found everything intact.
Old Oct 22, 2003 | 12:20 PM
  #6  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
Originally Posted by JamesDwan
There is no resistance, and the door lock moves up and down like it should
sounds like the rod from the handle to the latch. does the inside door handle work?
Old Oct 22, 2003 | 02:01 PM
  #7  
Bill Doran's Avatar
Junior Member
 
Joined: Jun 2001
Posts: 94
Originally Posted by JamesDwan
I have a '91 Maxima. The other day the door just refused to open (as I was dropping off my wife at her office). It still won't open! I tried taking off the door panel to get at the inside, tried the keyless enty-nothing worked. I am convinced some little plastic catch has broken. Does anyone have any suggestions?
Thanks in advance for any help on this matter.

JamesDwan
My 92 GXE has had same problem in front passenger door for over 1 year. I, like you removed enough of the door panel to access the rods from the door handle & lock and no matter how hard I pull/push no good. 2 Dealer's have said they need to break door latch to open door and replace with new latch. Estimate $250+. I left car with one dealer for a day & then he told me he had to order parts and wanted deposit! Door latch is down low in door and can't be seen thru cut outs on inside of door. I hope to try myself to repair when my courage is up. If you repair let me know. Good luck
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
King_Ten_Ahead
5th Generation Maxima (2000-2003)
14
Sep 30, 2015 04:27 PM
delerium75
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
2
Aug 19, 2015 11:08 AM
shaunkey1
5th Generation Maxima (2000-2003)
4
Aug 18, 2015 10:09 PM
george__
5th Generation Classifieds (2000-2003)
0
Aug 18, 2015 07:06 PM
kjm900r
4th Generation Maxima (1995-1999)
6
Aug 5, 2015 07:14 AM




All times are GMT -7. The time now is 11:07 AM.