Stops pulling around 3400 RPM?
Stops pulling around 3400 RPM?
Hi everyone,
My 5 spd seems to run fine, I have a bone stock 2000 GXE with a drop in K&N air filter only. I am the second owner, it has 65K. The car pulls like crazy up to around 3400 RPM, then you can feel a change, almost as if the cam profile changed to something less aggressive, and the car stops pulling, changing to a smoother/slower acceleration. There's no bucking, just a slight SOTP change. Does this in all gears. I can't imagine valve float or anything like that at such a low RPM. Maybe coil pack(s) that are going south, but not enough to throw a code?
Thanks!
My 5 spd seems to run fine, I have a bone stock 2000 GXE with a drop in K&N air filter only. I am the second owner, it has 65K. The car pulls like crazy up to around 3400 RPM, then you can feel a change, almost as if the cam profile changed to something less aggressive, and the car stops pulling, changing to a smoother/slower acceleration. There's no bucking, just a slight SOTP change. Does this in all gears. I can't imagine valve float or anything like that at such a low RPM. Maybe coil pack(s) that are going south, but not enough to throw a code?
Thanks!
Originally Posted by dvanorder
Hi everyone,
My 5 spd seems to run fine, I have a bone stock 2000 GXE with a drop in K&N air filter only. I am the second owner, it has 65K. The car pulls like crazy up to around 3400 RPM, then you can feel a change, almost as if the cam profile changed to something less aggressive, and the car stops pulling, changing to a smoother/slower acceleration. There's no bucking, just a slight SOTP change. Does this in all gears. I can't imagine valve float or anything like that at such a low RPM. Maybe coil pack(s) that are going south, but not enough to throw a code?
Thanks!
My 5 spd seems to run fine, I have a bone stock 2000 GXE with a drop in K&N air filter only. I am the second owner, it has 65K. The car pulls like crazy up to around 3400 RPM, then you can feel a change, almost as if the cam profile changed to something less aggressive, and the car stops pulling, changing to a smoother/slower acceleration. There's no bucking, just a slight SOTP change. Does this in all gears. I can't imagine valve float or anything like that at such a low RPM. Maybe coil pack(s) that are going south, but not enough to throw a code?
Thanks!
Originally Posted by Kiosk
I had the same problem as you described on mine w/o any codes, after doing all kinds stuff the problem was solved by cleaning my air flow meter (MAF)....
Thread
Thread Starter
Forum
Replies
Last Post
JoshG
4th Generation Maxima (1995-1999)
51
Sep 21, 2015 10:41 PM




