Audio and Electronics Discuss in-car entertainment systems, audio and video systems, car alarms and other electronics topics.

bose head unit problems, help?

Thread Tools
 
Search this Thread
 
Old Sep 6, 2004 | 12:53 PM
  #1  
gixxermike's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 30
bose head unit problems, help?

I keep getting a cd error in my 96 max. when I try to play a cd. If i screw around with the forward and reverse buttons a little bit it sometimes works. I saw on a site that I may have a bad resistor in the head unit. Anyone know how to fix it or been through this before.
Old Sep 7, 2004 | 09:02 PM
  #2  
BlackMAX96SE's Avatar
Newbie - Just Registered
 
Joined: Oct 2003
Posts: 2
I havent tried to fix my bose but I looked around and this might help you out http://madchef.5u.com/maxima/bose/fixes.html
Old Sep 8, 2004 | 01:52 PM
  #3  
way2fast95's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 334
From: Dallas, TX
I had this exact same thing happen in my '93 J30 Bose HU, lookily I worked around the corner from a guy here in Dallas, Willman's Electronics, he only works on Bose HU and speakers, he fixed it liked new for $180. However on my current '95 Maxima Bose HU, when I turn on the headlights my HU display goes out, so I am going to take it apart on Friday and try to MadChef resistor fix.

Here is his site, www.willmanselectronics.com
Old Sep 8, 2004 | 03:53 PM
  #4  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
this seems to be a re-occuring issue with the Maxs

My HU isnt playing CD's also I get the "CD Errr"

I have seen the write up on how to fix the CD Err message (solder all the resistors) I would like to know if anyone has done this and restored their cd player back to life?

I took apart my bose, and was about to take off thd Cd player unit to check the resistors I got a little worried and didnt want to mess up my unit, so if someone has done this sucessfully then I will attempt, if not I'll see if a electronic shop can do it, just to solder all check all resistors shouldnt cost too much right?

thanks.
Old Sep 10, 2004 | 02:05 AM
  #5  
gixxermike's Avatar
Thread Starter
Member
 
Joined: Aug 2004
Posts: 30
I saw the website that show how to disassemble and fix the hu, but it wasn't too clear on where all the resistors were and how many there are. Anyone done this or have a good pic of the problem parts?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
9aj9
7th Generation Maxima (2009-2015)
5
Apr 5, 2020 12:11 AM
slowlifer
5th Generation Maxima (2000-2003)
0
Sep 8, 2015 05:53 AM
Pnjboyzz
6th Generation Maxima (2004-2008)
1
Sep 4, 2015 09:04 AM
A32goldylocks
4th Generation Maxima (1995-1999)
2
Sep 2, 2015 06:39 AM




All times are GMT -7. The time now is 12:32 PM.