5th Generation Maxima (2000-2003) Learn more about the 5th Generation Maxima, including the VQ30DE-K and VQ35DE engines.

Frankencar exhaust and D2s installed

Thread Tools
 
Search this Thread
 
Old Nov 11, 2004 | 05:47 AM
  #1  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Frankencar exhaust and D2s installed

Finally got everything I needed and installed all the goodies. Once again Frankencar came through for me and delivered within a week. I highly suggest contacting them first and making sure they have something on the shelf before you order and get your hopes up.

The D2 install wasn't bad. The one on the front driver is making a little noise, cant make out exactly where it is coming from yet. The ride is nice and tight. Came back from a long trip and had to cross through a super twisty road in the backwoods of Kentucky. The D2s performed extremely well.

Check out pages 7 and 8 of my link below for pics.

http://www.cardomain.com/memberpage/190388/7
Old Nov 11, 2004 | 06:03 AM
  #2  
maximillus's Avatar
Senior Member
iTrader: (1)
 
Joined: Feb 2002
Posts: 386
how much did u drop?
Old Nov 11, 2004 | 06:09 AM
  #3  
VMaximus02's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2002
Posts: 806
How do you like the FrankenCar Exhaust so far?
I've just checkout your webpage. I don't see any aftermarket Y-pipe or header installed on your car? Nice car you got there, btw.
Old Nov 11, 2004 | 06:20 AM
  #4  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
It is probably only dropped 2" total. At first it was real low, but I took it up when I got home and put it at what I feel was a safe height.

The Frankencar exhaust is real nice. A bit tight to put in, but good to go now. I used an exhaust hanger like you said to keep it tight and off the car. It is real quiet which I like over what I had. I am going to get the hotshot headers or catman headers in the spring and then the pipes will sound perfect, but right now I like it quiet. I am not affraid of the local PD pulling up behind me now.

I think I lost a little bit of power from the Magnaflow setup, that setup pulled the hardest of the 3 setups I did. It doesnt matter though, the Franken is still providing better power over the stock, looks good, and will sound real good when I do the headers.
Old Nov 11, 2004 | 07:18 AM
  #5  
Cubanato's Avatar
Joo wanna play??......ok we go to war
 
Joined: May 2003
Posts: 1,274
Yes!! Frankencar with Hotshot headers sounds sweet!!!!! i love it!!
-J
Old Nov 11, 2004 | 07:47 AM
  #6  
sarmstrong's Avatar
Senior Member
 
Joined: Jul 2004
Posts: 127
Sharp!!....drop and exhaust look great.
Old Nov 11, 2004 | 08:14 AM
  #7  
scopium
Guest
 
Posts: n/a
fankencar.. sounds like stock... and its heavy as ****
Old Nov 11, 2004 | 09:17 AM
  #8  
BeSeenWithGreen's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2004
Posts: 304
From: Philadelphia
That does look real nice
Old Nov 11, 2004 | 10:26 AM
  #9  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Originally Posted by scopium
fankencar.. sounds like stock... and its heavy as ****
Actually no. The stock exhaust and the Frankencar are about the same... Maybe 5-8 lbs difference. There is a little sound added, but very little. Once you go to headers or a Y pipe though, it all changes.

After 4 different setups on my car, I think I can claim the "Unofficial Exhaust Guru"
Old Nov 11, 2004 | 10:34 AM
  #10  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Tell me this doesnt sound sick.....

(Right Click-> Save As)
Cubanato's Sweet Sound
Old Nov 11, 2004 | 10:39 AM
  #11  
VMaximus02's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2002
Posts: 806
Up to 10# is nothing. The SS-exhaust materials will probably last for lifetime of the car. The most heaviest part of the exhaust is the muffler. This is due to the extra insulator materials inside the muffler housing.
Old Nov 11, 2004 | 10:40 AM
  #12  
sooner02r1's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2004
Posts: 848
Originally Posted by dblrr900
Tell me this doesnt sound sick.....

(Right Click-> Save As)
Cubanato's Sweet Sound

Dude that's one of the best sounding maximas I've heard. Awesome
Old Nov 11, 2004 | 11:17 AM
  #13  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Yes. A little rumble to let ya know you have something, but not enough to let the whole street know....
Old Nov 11, 2004 | 11:31 AM
  #14  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,551
From: Fairfax, VA
Originally Posted by dblrr900
Yes. A little rumble to let ya know you have something, but not enough to let the whole street know....
Unlike my fartcan GReddy (but I still love it)... the FC sounds great, esp with the headers...
Old Nov 11, 2004 | 12:06 PM
  #15  
MaxedOut's Avatar
Senior Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 2,104
i love my frankencar exhaust.. soemtiems its too quiet.. but then i remeber.. headers are comin on shortly then it will sound sweet.. i still havent fixed my exhaust hangers soo it bangs around soemtimes.. but im used to it
Old Nov 11, 2004 | 12:11 PM
  #16  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Originally Posted by MaxedOut
i love my frankencar exhaust.. soemtiems its too quiet.. but then i remeber.. headers are comin on shortly then it will sound sweet.. i still havent fixed my exhaust hangers soo it bangs around soemtimes.. but im used to it
Yeah, after I had that loud exhaust taken off, I honestly didnt know if the car was running. :/ but it is all good. I too will have the sounds of headers.

For the banging... get a hold of an exhaust hanger and wedge it between the cross section and the pipe, then use some device to secure it. We used a zip tie that runs up into the rubber and back out. It has not banged anything yet. That and the steel tie-rings from franken on the rear... it isnt moving.
Old Nov 11, 2004 | 12:17 PM
  #17  
Cubanato's Avatar
Joo wanna play??......ok we go to war
 
Joined: May 2003
Posts: 1,274
Originally Posted by sooner02r1
Dude that's one of the best sounding maximas I've heard. Awesome
thanx alot bro .... i used to have a greddy catback it was way way way too loud with the headers.....now im finally happy with this exhaust setup.......ASk POLO.....i botherd him day in and day out on what exhaust i should get haha
-J
Old Nov 11, 2004 | 12:51 PM
  #18  
PoLo's Avatar
2-Wheelin it...
iTrader: (7)
 
Joined: Aug 2000
Posts: 3,147
Originally Posted by dblrr900
Yeah, after I had that loud exhaust taken off, I honestly didnt know if the car was running. :/ but it is all good. I too will have the sounds of headers.

For the banging... get a hold of an exhaust hanger and wedge it between the cross section and the pipe, then use some device to secure it. We used a zip tie that runs up into the rubber and back out. It has not banged anything yet. That and the steel tie-rings from franken on the rear... it isnt moving.
you talkin about where it curves? where you connect both sections of the exhaust? that part?
Old Nov 11, 2004 | 01:00 PM
  #19  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
The tight little spot that the pipe goes through the whole in the cross section. Right above the connetion point.... I will find a pic.
Old Nov 11, 2004 | 01:06 PM
  #20  
Cutler's Avatar
......................
iTrader: (3)
 
Joined: Oct 2000
Posts: 18,913
From: Virginia
Originally Posted by sooner02r1
Dude that's one of the best sounding maximas I've heard. Awesome
As as this may sound, Igor's car actually sounds pretty damn mean if I do say so myself
Old Nov 11, 2004 | 01:07 PM
  #21  
PoLo's Avatar
2-Wheelin it...
iTrader: (7)
 
Joined: Aug 2000
Posts: 3,147
Originally Posted by dblrr900
The tight little spot that the pipe goes through the whole in the cross section. Right above the connetion point.... I will find a pic.
so that's the noise?
why did i have a feeling it was heatshield noise? or is it that as well?
Old Nov 11, 2004 | 01:17 PM
  #22  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
OK. Here is a pic of where I wedged in the rubber bushing

Old Nov 11, 2004 | 01:57 PM
  #23  
Glude's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
So do the headers make the greddy exhaust to loud? I figured with a nice resonator it wouldnt be loud at all. Man that FC exhaust sounds sick with the headers!
Old Nov 11, 2004 | 02:01 PM
  #24  
Puppetmaster's Avatar
Supporting Maxima.org Member
iTrader: (48)
 
Joined: Apr 2004
Posts: 16,551
From: Fairfax, VA
Originally Posted by Glude
So do the headers make the greddy exhaust to loud? I figured with a nice resonator it wouldnt be loud at all.
I would say that you're right... a GReddy muffler with any well resonated B-pipe would be less loud.... at least that's what I'd think, based on how small the resonater is on my GReddy B-pipe and what I've seen with the Cattman and FC B-pipes, since those 2 have the most quiet exhausts...
Old Nov 11, 2004 | 03:51 PM
  #25  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Originally Posted by Puppetmaster
I would say that you're right... a GReddy muffler with any well resonated B-pipe would be less loud.... at least that's what I'd think, based on how small the resonater is on my GReddy B-pipe and what I've seen with the Cattman and FC B-pipes, since those 2 have the most quiet exhausts...

I think you would need a resonator larger than the greddy can....

You have to remember that the headers removed two pre-cats and opens up the size of the pipes. I dont think any resonator will make it sound normal after doing headers. Even the stock exhaust is going to sound beefy after a set of headers and a new B-pipe....
Old Nov 11, 2004 | 08:09 PM
  #26  
VMaximus02's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2002
Posts: 806
Originally Posted by dblrr900
OK. Here is a pic of where I wedged in the rubber bushing

Looking at your posted pic, the area where you "wedged in the rubber bushing" isn't the same location that I had talked about. I used the hose clamp (2-included) and wrapped it around the stock rubber hanger and tighten it to push the muffler higher for clearance. The banging noise occurred at the rear of the muffler (upper edge of the muffler's canister) where it would hit the car frame over heavy road bump. But hey if it works for you, then there is another solution to the FC-catback banging noise issue!
Old Nov 12, 2004 | 03:48 AM
  #27  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Yeah. My exhaust is so tight we were hanging on the end of the tips. and it didnt move. There is plenty of clearance on the back of mine, but if you look close at the picture you will see a little rust on the cross section, that is where my exhaust has been knockin around for the last year, and this setup was tight there too. So that is where we used the rubber stop.

There is no banging at all on mine, although I am keeping my eye on this tight spot next to the heat shield. With a stock setup, this exhaust is def quiet. maybe too quiet, but if you are going to do headers or a Y... well, that all changes and I cant imagine going with anything but a catman or frankencar. just my .02
Old Nov 12, 2004 | 05:59 PM
  #28  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
I just have to say that I am very happy with these D2s. They are real nice once you have them dialed into your likes... Today in heavy rain, new toyo tires, wooo hoo, I was 100% confident in my car for the first time, and was driving as if there was no major water laying around. The D2s and the tires are def my best mods yet. I can't say enough of how my car feels now. I have been waiting for this so long. The maxima should have come like this, or at least close to it with a "SE" package. Not sitting 5 inches off the tires.

At less than $1k the D2s are well worth it. Time will tell if we all still feal the same after a year.
Old Nov 12, 2004 | 06:05 PM
  #29  
BLKMAX005SPD's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Sep 2002
Posts: 1,565
looks awsome man
Old Nov 13, 2004 | 04:23 PM
  #30  
dblrr900's Avatar
Thread Starter
Supporting Maxima.org Member
 
Joined: Feb 2002
Posts: 1,489
Hey Blkmax005spd -

I am coming up that way in a couple weeks. Would love to check out your max. My wife's family is up there and we are coming up Friday 11-26. PM me with your contact info if you are down to meet.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
Jun 27, 2019 01:37 PM
TheMafia
5th Generation Maxima (2000-2003)
6
Sep 4, 2015 08:26 AM
Johnny9595
4th Generation Maxima (1995-1999)
5
Sep 3, 2015 05:18 AM
Justin Kroll
5th Generation Maxima (2000-2003)
7
Sep 2, 2015 11:06 AM
A32goldylocks
4th Generation Maxima (1995-1999)
2
Sep 2, 2015 06:39 AM




All times are GMT -7. The time now is 12:50 PM.