I've looked through the stickies with no luck. The one I found with a link to this tek took me to an oddball site.

Can anyone tell me how to reset the ECU codes or point me in the right direction?

Thank you

 

try this

http://www.brianv.net/mods/ecu/

 

I'm surprise you didnt see it in the how to's but.

to reset the ecu, by the accelerator is a plastic guard which is covering the ecu, take it out (2 platic screws)

then get a flash light (dont have to but it will help) you should see an opering with a screw and its protected by a plastic, you can puntcure through the plastic or peel it back. and then turn the screw clockwise till you feel resistance (stop for 2 secs), then turn it back couter clock wise till you feel resistance (stop 2 sec), then turn it back clock wise again and stop and look at your CEL, it should be flashing a code.

record the number of long puses and number of short pulses, remember or better write down that number example 4 long 3 short. then follow the step above again but end with the counter clockwise turn to reset the ecu.

come here check the stickes to find out what the code means.

good luck.

 

damn beat to it!