4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Wheel Ballance Problems?

Thread Tools
 
Search this Thread
 
Old Mar 17, 2005 | 11:04 PM
  #1  
r7g7h7's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Feb 2005
Posts: 10
Wheel Ballance Problems?

I recently bought my '98 max and as part of the deal I had new 17" wheels and tyres fitted by a franchised and experienced tyre dealer. So far he has fitted 3 different sets of wheels and 4 different sets of tyres before finally getting them to ballance. But the only set of tyres they could get properly ballenced were noisy. I went back to have a better set fitted and they are shaking again. Can Maximas be particularly sensitive to ballance? Is there any other part of the drive train that can cause problems? eg drive shafts?
Old Mar 17, 2005 | 11:24 PM
  #2  
nick's Avatar
Supporting Maxima.org Member
iTrader: (10)
 
Joined: Dec 2001
Posts: 2,063
From: San Diego
yes , maximas are very prone to balancing issues , especially ones with high miles

check your rotors for run out and wheel bearings might be a issue as well.
As far as drive axles - mine are original , with 145K and my car been shaking for over 2 years now, I have done every thing to get rid of the steering wheel shimmy and jutter , but with no luck.

I am repalcing inner tie rods next week , and i will be installing new driveaxles sometime in spring

Nick.
Old Mar 18, 2005 | 01:18 AM
  #3  
r7g7h7's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Feb 2005
Posts: 10
Ive only got 56000Klm and it's never been bent. Good luck with the tie rods
Old Mar 18, 2005 | 04:50 AM
  #4  
Chickan's Avatar
Supporting Maxima.org Member
iTrader: (12)
 
Joined: Feb 2004
Posts: 1,051
does it appear to be the same wheel everytime, or does it change?

And, as said before, check your rotors.
Old Mar 18, 2005 | 08:26 PM
  #5  
JSMEXUSA
Guest
 
Posts: n/a
I have same problem since got car a year ago with 45000 miles; have some shaking on stering wheel even after balancing new tires. It seems like is a defect from factory. Somebody said changing pinion rack will fix that problem. I really hate that problem, rims are not bent thankgod, alignment, tie rods, etc.. are good.
Old Mar 18, 2005 | 10:04 PM
  #6  
vortechpower's Avatar
Senior Member
iTrader: (1)
 
Joined: Feb 2004
Posts: 1,564
Mine has been shaking for a while now. I can't stand it!
Old Mar 18, 2005 | 10:16 PM
  #7  
maxgtr2000's Avatar
KH3 by popular demand
iTrader: (29)
 
Joined: Sep 2004
Posts: 3,102
From: Detroit, MI
Sometimes its the aftermarket rim itself sometimes they just don't balance well, whenever I throw on my stocks I have no issues.
Old Mar 19, 2005 | 12:30 AM
  #8  
r7g7h7's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Feb 2005
Posts: 10
It seems to be a balance senitivity issue. Not always the same wheel or wheels. have tried 2 different brands of after market wheels and 2 diferent brands of tyres - all in all 16 tyres and 12 rims (at the tyre company's expence than God) Anyway they are going to try again on Tuesday to get it right.
I certainly couldn't live with the shake.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matts95max
General Maxima Discussion
15
Apr 23, 2025 10:44 AM
markevans999
3rd Generation Maxima (1989-1994)
7
Sep 10, 2015 04:29 PM
dcam0326
General Maxima Discussion
4
Sep 8, 2015 11:02 PM
nbstriker10
5th Generation Maxima (2000-2003)
5
Sep 4, 2015 04:26 PM
jfl330
7th Generation Maxima (2009-2015)
4
Sep 4, 2015 01:44 PM




All times are GMT -7. The time now is 07:45 PM.