I see no mechanism for doing this. Has anyone come up with a way to do this? Does shimming up the bolts that hold the lens and stuff in place do anything? I tried bending it upward but it falls back down. I should have taken some pictures.

 

This should help you. http://forums.maxima.org/showpost.ph...68&postcount=4

 

I beleive the 2 bolts under the pop-up plastic cover can be used to adjust the fogs...

 

I'm pretty sure the outter one adjusts it horizontally and the inner one adjust it vertically.

 

Awesome. Thanks.

 

yea have fun adjusting them.. they are a pain in the ***....

 

Tell me about it...sometimes I wish I didn't have fogs at all when it came time to adjust them. I had another member do mine for me cuz I couldn't get it right the first 40 times.

 

I have a very weird prob with my driver side fog. The lens cracked and now it's full of water. Gives it a nice orange glow... it's discusting, and I need to change it :-(

 

best thing i could find was just using washers to shim it like you mentioned, but it is a royal pain in the nuts. there's not a lot of room to work in there and it will take you a while to get it just right. try to get some thin washers cuz they move the beam a lot more than you think