4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

How do I hook a corner light up to this:

Thread Tools
 
Search this Thread
 
Old Aug 7, 2007 | 05:12 PM
  #1  
Brad23's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 45
How do I hook a corner light up to this:


My last thread, "How do I hook a turn signal up to this" worked out great, I'm hoping you guys can help me out here.


A mean *** fence came by one night and ripped my corner light out, that is whats left. Closer inspection reveals that the light was 100% ripped out except for the little tabs where it screws in, so I should have no problem fastening another light up to that... but what do I do about the light bulb and socket itself, that wire poking out.. I'm assuming that their should have been a socket and light bulb connected to that, right?. What do I need to do/buy to get that light working...


Also I plan to buy a new corner light off of someone on the site here, how do I screw it into those screw holes? Do I have to take the headlight off?


Please help!
Old Aug 7, 2007 | 05:20 PM
  #2  
VANGtastic97's Avatar
Senior Member
iTrader: (8)
 
Joined: Jun 2007
Posts: 422
From: Harrisburg, PA
i don't think there are any screws here. first, you need to get a flathead and pry off the broken plastic piece (lower left) from the metal. you definitely need a new bulb and its bracket. soder the the wires and pop the corner lens in.
Old Aug 7, 2007 | 05:32 PM
  #3  
Brad23's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 45
Originally Posted by VANGtastic97
i don't think there are any screws here. first, you need to get a flathead and pry off the broken plastic piece (lower left) from the metal. you definitely need a new bulb and its bracket. soder the the wires and pop the corner lens in.
Can I buy that bracket for the bulb at a pepboys?

The two things I circled in this pic may not have been screws, but they did look llike it when I was checking it out. Are those the things you are saying I should pry off?
Old Aug 7, 2007 | 06:04 PM
  #4  
VANGtastic97's Avatar
Senior Member
iTrader: (8)
 
Joined: Jun 2007
Posts: 422
From: Harrisburg, PA
I know the bottom piece needs to come off. that's where the lens pops in and out. I'll check tomorrow afternoon for the top part.
Old Aug 7, 2007 | 06:11 PM
  #5  
Brad23's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 45
Check out this pic:

Originally Posted by VANGtastic97
I know the bottom piece needs to come off. that's where the lens pops in and out. I'll check tomorrow afternoon for the top part.
I just went out and popped it off! Thank you!

This car was designed by a genius!
Old Aug 7, 2007 | 06:25 PM
  #6  
VANGtastic97's Avatar
Senior Member
iTrader: (8)
 
Joined: Jun 2007
Posts: 422
From: Harrisburg, PA
damn... i guess i forgot there was one screw on top. I can't tell by the pic, but i think the top piece needs to come off. i'm guessing all you have to do is just buy the lens and bracket. I don't know about pep boys but check courtesy parts in texas. http://www.courtesyparts.com/betasit...1822_1832.html ...
Old Aug 7, 2007 | 06:36 PM
  #7  
maxima985spd
Guest
 
Posts: n/a
the fender got faaawwwwked up
Old Aug 7, 2007 | 09:48 PM
  #8  
Snypa's Avatar
Senior Member
iTrader: (35)
 
Joined: May 2007
Posts: 7,389
From: I-75 4th_Laud
damnn man,u shurr tore that shiet off.it shoudnt be that hard to fix.VANG,sounds like he knows whats going on.
Old Aug 7, 2007 | 10:16 PM
  #9  
Brad23's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 45
The storys:

One day I was pulling in to get gas. The weather was crazy the few days before. I go to pull up to a gas pump but oh... the stupid mother______s that run the place neglected to even put salt on the 1 inch block of ice that covered their entire parking lot. I slid right into a concrete blockade and that was that.

Skip to a year or two later and I am driving my buddy home and he starts barfing out the passenger side window. "oh no you don't!" So I pull down a side street and as I'm driving down I realize its a one way, a LOOOONG one way, and I'm going the wrong way. So I go to turn into a drive way to back out the other way but I didn't even see the fence. Turned my front into it while back out... Ya that sucked.

Hmm and then a week later some D-bag pulled into my lane with out checking to see if I was there first and hit the other side. Small dent on that, but I had to slam on my breaks and these cheap *** tires have flat spots in them now.

So now I need to fix those lights up and pull some dents and I will be good as new.. sortof.

Also thanks for the help vang!
Old Aug 8, 2007 | 05:35 AM
  #10  
VANGtastic97's Avatar
Senior Member
iTrader: (8)
 
Joined: Jun 2007
Posts: 422
From: Harrisburg, PA
well that's philly for ya...if you have 17's i got 3 tires laying around that i could sell.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM
rnb754
4th Generation Maxima (1995-1999)
6
Sep 14, 2015 11:39 PM
Maxie40
General Maxima Discussion
1
Sep 14, 2015 11:28 AM
-ReLLiK-
4th Generation Classifieds (1995-1999)
0
Sep 8, 2015 12:02 PM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM




All times are GMT -7. The time now is 03:37 AM.