Hi everyone! A friend of mine has a company that makes LED light boards for interior lighting in cars/homes and he makes something VERY similar to Metal Max's LED lights.
Who would be interested in a set? I have them installed in my doors, really bright and fit perfectly in the casing. I'll have pics tonight.

For a pair of them it'll cost $40 or for one $25. These are 12 LEDs boards with a resistor.
Also 28 LED boards for dome lights for $30.

If a lot of people are interested I'll ask and see if you guys could get a discount. i'd say 10 at a time? These can be used anywhere else just needs a positive and negative connection. I plan on using two for my trunk. and maybe two for my licenses plate lights.

 

pics would be nice.

 

bump for pics PLEASE

 

as promised pics!
the light color is actually a little more on the whit side than blue (which i personally like)


From inside the car.


Passenger side (door closed) sitting on the driver's side

 

Close up of the LED on

Driver's side light from outside


Thickness

Close up of the actual product


I took the pictures at a fairly fast shutter speed so that the pictures represent what i see in person the best i could.

If enough people are interested i'll let him know to make some in bulk.

Basically the best way I could describe these is that they are STUPID bright, its insane. haha and are not even as hot as regular bulbs

 

I'm in for a dome light, does fit inside the cover? or entire housing replacement?

Edit: the doors look nice too, I'll take a pair, but please explain the installation procedure.

 

I`d like to see the license plate ones too, if there as bright as the new lexus`s ones I would be down for a set.

 

I can do a little how to, but basically you can do two things:

1. splice into red and black wires in the door.
2. get a wedge adapter that plugs right into the reg bulb (i'll have to ask if he will be including this as apart of the package.
The board itself fits perfectly on top of the housing and the clear lens snaps over that without any extra pressure.

I didnt get the adapter so i just spliced, simple enough.

As for the dome light i have to check the fitting as I didn't get that when i bought the doors. I'll get back to you on that.

They will be brighter I'm 100% sure of it. I'll try to get pics tonight after i do the fitting for them.

 

The List:

Set of doors and/or License Plate (2 boards of 18 LEDs) $42 Shipped w/tracking:
Name- How many sets you want



Dome (1 board of 28 LEDs) $32 Shipped w/tracking
Name- How many you want.



if you buy them together I'll combo ship it of course

Once we get 5 sets signed up I'll let him know. and when I get them IN HAND you guys could pay me through paypal. Maxima112@sbcglobal.net

I have a great rep on ebay lbcaznguy is my username, and I've been around here for quiet some time.

 

sounds good , how many LED bulbs are used for the license plate? or r u just usin the door ones? And I think u can sell a lot more if he can include those adaptors, so it will be pretty much plug n play sounds like.

 

Intersetd in the licence plate ones. Can we get a pic of that one.

Also the pics are 18 leds is that correct because you put 12 leds

 

oops! thanks yeah its the one pictured (those are the smallest anyways) so 18 LEDs. And I'm going to try and use 18 LED for the lic plate tonight, check here for an update later. put your name on the list if you are interested.

I plan on using 18 LED boards.

 

It'd be great if he can provide the wedge adapter. Also, if the LED boards simply stay in, won't it rattle around?

 

yea I'm gonna wait till I see the pics n make sure they don't rattle around . and see if he can lower the price if we get close to 10 people. And also let us know bout the adaptor as well that will really help. thanx

 

actually no if you look at the picture with the flash drive the one with the LED's pointing down it has 3M adhesive on the back (red color plastic is the peel) that will stick on the housing, i'll take some pictures of that for you guys since some are concerned about it. stay posted.

 

Angle view of the fit in the housing.

where it fit inside the housing

Holding it up-side-down

 

Looks good, if he can provide the wedge adapter, I'm in 100% for a dome and 2x doors.

 

any pics of the licence plate

 

YES! good news guys! i found out he makes 8 LED boards too that measure 1.5 x .8 in!! that should fit fine in the lic plate, I measured out the space last night and it'll be fine. I dont have pics of this as i'd have to order a couple first. I'm actually going to place an order with him for some lic plate lights and a dome light.

If anyone wants their order asap i can place you order with mine (and a few of my friends). Ordering in 2 days

Set of door LEDs (2 boards of 18 LEDs) with adapter $42 Shipped w/tracking:
Dome LEDs (1 board of 24 LEDs) with adapter $32 Shipped w/tracking
Lic plate LEDs (2 boards of 8 LEDs) with adapter $33 Shipped w/tracking
Map LEDs ( 2 boards of 16 LEDS) $38 Shipped <~~~ added to the list 12/10
I'm charging like $3 for shipping FYI

if you buy them together I'll combo ship it of course

PM me with what you want and I'll write it down, over the weekend I'll place the order for whoever PM's me, once I get them in my hand I'll request money then ship within the next day.

 

Does the door led come with the wedges?

 

I'm going to try and get those included. I'm just a really small order and i don't want to bug him too much. I'm doing this with the lic plate as well. and the dome also has an adapter (i believe)

 

You should have a list of what people want and have them build off the list so you can see how many people want what.

Door Lights:
1. The Law 2x (depending if it has adapters or not)

Dome Lights:


License Plate Lights:

 

Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:

 

If you can provide license plate and dome light pic, that would be nice. Btw which dome lights? the one in the middle or the one in the front next from sunglasses holder.

 

Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 1x (depending if it has adapters or not)

 

dome, center, not the sunglass one....although i think the lic plate measurements will fit in that spot. there is also a square on available which measures 1.38 x 1.38. I plan on eventually buying on of everything to test fit if there is enough demand. but I personally only wanted doors, lic, and dome. i'll keep everyone updated over the weekend. please be patient.

 

put me down for a set of lic. plate LED`s if the adaptors are included as well.

 

How about you put yourself on the list?


Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 1x (depending if it has adapters or not)

 

I'm going to clear up the adapter question this weekend. so i'm assuming if they do include it you guys want your order in with mine correct?

Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 2x (depending if it has adapters or not)
2. mitymax03 2x (depending if it has adapters or not)

you'll need 1 set of boards (2 boards) for the lic plate LEDs.

 

Any way you can get these made for the map lights?

 

map lights will be an 18 LED board measuring a little less than 2 x 1.

 

Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)
3. Maximo-SE (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 2x (depending if it has adapters or not)
2. mitymax03 2x (depending if it has adapters or not)

you'll need 1 set of boards (2 boards) for the lic plate LEDs.[/QUOTE]



Im still wondering if I should get the LED license plates but do I really need people to see my plates from afar?...

 

I wanted something in writing saying that it would include the adapters and waiting on that before i order, as i dont want to get stuck with all these and lights b/c no adapter. I'll keep everyone updated.

I think the lic LEDs will match up perfect with Lexus lic lights. not too bright but more sharp in lighting.

 

What is going on with this maxima112?

 

im in the final stages of confirming the wedge adapters they take a couple of days to reply, i usually reply within a few hours. sorry for the deal i just dont want to front the money then have everyone bail b/c no adapters....

 

can i see a pic of the plug ....

 

Need an update please.........

 

Need an update please.........

 

well I was told that the adapter will be included with the boards. So I'll be making an order tomorrow based on the list below.

Door Lights:
1. The Law 2x (depending if it has adapters or not)
2. n3985 2x (depending if it has adapters or not)
3. Maximo-SE (depending if it has adapters or not)

Dome Lights:
1. n3985 1x (depending if it has adapters or not)

License Plate Lights:
1. Kristoefur 2x (depending if it has adapters or not)
2. mitymax03 2x (depending if it has adapters or not)

once i get them in I'll let everyone know by PM how to pay and how much, etc etc and pics of their boards if they want. So add yourself to the list if you want in on this first round. after this you'll have to wait until i get about 5 people (10 boards). then I can actually order them.

 

Cool!!! I'll be waiting.