1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

6th Gen Max my personal best 1/4 mile Sunday NA without the juice!

Thread Tools
 
Search this Thread
 
Old Apr 1, 2008 | 03:53 PM
  #1  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
6th Gen Max my personal best 1/4 mile Sunday NA without the juice!

I ran two passes NA on Sunday and ran my best NA times 14.1@97MPH and 14.2 and 99MPH.



Old Apr 1, 2008 | 06:57 PM
  #2  
grey99max's Avatar
LandShark has Cosworth
iTrader: (12)
 
Joined: Jan 2004
Posts: 4,327
From: Topeka, KS
Originally Posted by kevin007
I ran two passes NA on Sunday and ran my best NA times 14.1@97MPH and 14.2 and 99MPH.
Not bad, not bad at all - which intake manifold did you have mounted for this day ???

Last edited by grey99max; Apr 1, 2008 at 07:04 PM.
Old Apr 1, 2008 | 10:32 PM
  #3  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
I ran with the Kinetix on.

Last edited by kevin007; Apr 2, 2008 at 04:57 AM.
Old Apr 1, 2008 | 11:19 PM
  #4  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
sweet times any changes made since your last run

and what your n/a goal
Old Apr 2, 2008 | 01:24 AM
  #5  
331TwistedWedge's Avatar
Newbie - Just Registered
 
Joined: Mar 2008
Posts: 13
From: Cincinnati Ohio
nice 60ft times, on street tires i assume ... i just joined the board and made a post in another thread, but i could only nail a 2.29 60ft ~ the track was stripped with NO rubber on it ... i managed one 14.62 run, but the mph shows promise ...

can you guys share what you've done to your cars and the gains you recieved ... im pretty much a gear head, but only fool around with mustangs ... im new to the nissan world (other than my 1988 nissan pickup with 305,655 miles) but im finding these maximas very entertaining ...
Old Apr 2, 2008 | 04:38 AM
  #6  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
Originally Posted by t6378tp
sweet times any changes made since your last run

and what your n/a goal
I lowered the car with the Eibach Pro Kit 2" drop up front and .08" drop in rear
Old Apr 2, 2008 | 04:45 AM
  #7  
Elite6's Avatar
Member
 
Joined: Mar 2008
Posts: 50
From: Canada
Originally Posted by 331TwistedWedge
nice 60ft times, on street tires i assume ...
I think he is running drag radials
Old Apr 2, 2008 | 04:46 AM
  #8  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
Originally Posted by 331TwistedWedge
nice 60ft times, on street tires i assume ... i just joined the board and made a post in another thread, but i could only nail a 2.29 60ft ~ the track was stripped with NO rubber on it ... i managed one 14.62 run, but the mph shows promise ...

can you guys share what you've done to your cars and the gains you recieved ... im pretty much a gear head, but only fool around with mustangs ... im new to the nissan world (other than my 1988 nissan pickup with 305,655 miles) but im finding these maximas very entertaining ...
I was on Nitto drag radials. My mods are: Greddy SP-2 Catback, F5CAI, Cattman y-pipe, Kinetix Upper Intake Manifold, Eibach Pro Kit 2" drop in front and .08" in rear. Nitto DR's 245/45/17 Stock timing 15 BDTC, Governer removed and 7100 Rev limiter. NO Headers, NO UDP, NO Spacers NO SAFC.
Old Apr 2, 2008 | 08:02 AM
  #9  
Elite6's Avatar
Member
 
Joined: Mar 2008
Posts: 50
From: Canada
Originally Posted by kevin007
I was on Nitto drag radials. My mods are: Greddy SP-2 Catback, F5CAI, Cattman y-pipe, Kinetix Upper Intake Manifold, Eibach Pro Kit 2" drop in front and .08" in rear. Nitto DR's 245/45/17 Stock timing 15 BDTC, Governer removed and 7100 Rev limiter. NO Headers, NO UDP, NO Spacers NO SAFC.
Did you purchase the consult tool the dealers use to increase the RPM limit and advance timing? How safe is 7,100 RPM on the 3.5? Have you dynoed to determine if the increased RPM limit is useful?
Old Apr 2, 2008 | 08:10 AM
  #10  
NmexMAX's Avatar
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Originally Posted by Elite6
Did you purchase the consult tool the dealers use to increase the RPM limit and advance timing? How safe is 7,100 RPM on the 3.5? Have you dynoed to determine if the increased RPM limit is useful?
My guess is that he has an L-Spec TS ECU, is this correct OP?
Old Apr 2, 2008 | 10:27 AM
  #11  
DandyMax's Avatar
3.5 in the works
iTrader: (7)
 
Joined: Jun 2004
Posts: 2,477
From: Ontario, Canada
Pretty good kevin007, nice 60 ft times.


Originally Posted by 331TwistedWedge
nice 60ft times, on street tires i assume ... i just joined the board and made a post in another thread, but i could only nail a 2.29 60ft ~ the track was stripped with NO rubber on it ... i managed one 14.62 run, but the mph shows promise ...

can you guys share what you've done to your cars and the gains you recieved ... im pretty much a gear head, but only fool around with mustangs ... im new to the nissan world (other than my 1988 nissan pickup with 305,655 miles) but im finding these maximas very entertaining ...
They are fun cars for what they are, aren't they. Pretty decent sleepers too if modded well.
Old Apr 2, 2008 | 05:33 PM
  #12  
Elite6's Avatar
Member
 
Joined: Mar 2008
Posts: 50
From: Canada
Originally Posted by DandyMax
Pretty good kevin007, nice 60 ft times.




They are fun cars for what they are, aren't they. Pretty decent sleepers too if modded well.
Dan, I am going to bring the 04 out this year to the track, I promoted the 96 to winter beater status. We will see how bad I lose to Anish in the 540
Old Apr 2, 2008 | 07:23 PM
  #13  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
Originally Posted by DandyMax
Pretty good kevin007, nice 60 ft times.




They are fun cars for what they are, aren't they. Pretty decent sleepers too if modded well.
Thanks! I am really loving her now since I put the lowering springs on its like another car. I cant wait to get on and off the highway ramps now! Lot's of fun.
Old Apr 2, 2008 | 08:48 PM
  #14  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
I see this car in action today, nice ride man
Old Apr 3, 2008 | 06:32 AM
  #15  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
Originally Posted by t6378tp
I see this car in action today, nice ride man
Yo! It was good to see you at the track yesterday. I hope you got everything figured out with the nitrous controller?
Old Apr 3, 2008 | 07:37 AM
  #16  
DandyMax's Avatar
3.5 in the works
iTrader: (7)
 
Joined: Jun 2004
Posts: 2,477
From: Ontario, Canada
Originally Posted by Elite6
Dan, I am going to bring the 04 out this year to the track, I promoted the 96 to winter beater status. We will see how bad I lose to Anish in the 540
Right on, it will be good to see you both out there again! I gotta get out to his new place to say hi sometime too.

I'm planning to go beat my 12.8 (hopefully) with the 3L once or twice this month and then it'll be a few months before I get back out again as there's lots to do on the 3.5 swap yet before it'll be ready to race.
Old Apr 3, 2008 | 10:40 AM
  #17  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
Originally Posted by kevin007
Yo! It was good to see you at the track yesterday. I hope you got everything figured out with the nitrous controller?
nope the best I could do is a 14.1@100mph, I am just going to bypass the controller and hookup a old school wot switch to see what happens. I have been fighting with this controller since I got it
Old Apr 3, 2008 | 10:54 AM
  #18  
kevin007's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2007
Posts: 403
From: Laurel, Maryland
You'll get it worked out.
Old Apr 4, 2008 | 01:46 AM
  #19  
331TwistedWedge's Avatar
Newbie - Just Registered
 
Joined: Mar 2008
Posts: 13
From: Cincinnati Ohio
Originally Posted by DandyMax
Pretty good kevin007, nice 60 ft times.




They are fun cars for what they are, aren't they. Pretty decent sleepers too if modded well.

yes these are fun cars, im glad i bought it ... now that im on this board, it brings even more interest ... i would love to get a 13 second time slip out of the max ... its funny because years ago i wanted a 13 second time slip out of my stang and now look where im at
Old Apr 4, 2008 | 04:19 PM
  #20  
accordingtou's Avatar
VQ30 DE T
iTrader: (41)
 
Joined: Jan 2005
Posts: 2,162
From: Philadelphia
Nice times.
My best n/a @ cecil is 14.5 on street tires. See yuh at the track soon.
Try to make it to the nissan shootout this summer
Old Apr 15, 2008 | 07:35 PM
  #21  
13SEC350Z's Avatar
Junior Member
 
Joined: Apr 2008
Posts: 25
good trap speed.
Old Sep 3, 2008 | 07:37 AM
  #22  
geoffc's Avatar
Supporting Maxima.org Member
 
Joined: Aug 2000
Posts: 94
From: houston, tx
Originally Posted by 331TwistedWedge
yes these are fun cars, im glad i bought it ... now that im on this board, it brings even more interest ... i would love to get a 13 second time slip out of the max ... its funny because years ago i wanted a 13 second time slip out of my stang and now look where im at

it's like looking in a mirror. who are you?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
14
Nov 7, 2024 07:31 PM
CRizz
5th Generation Maxima (2000-2003)
41
Jun 7, 2021 05:42 AM
NissLover
8th Generation Maxima (2016-)
1
Aug 22, 2015 10:26 AM
2k0to2k3
6th Generation Maxima (2004-2008)
0
Aug 18, 2015 09:59 AM
WeetoddA32
New Member Introductions
0
Aug 16, 2015 12:45 PM




All times are GMT -7. The time now is 03:10 PM.