7th Generation Maxima (2009-2015) Come in and talk about the 7th generation Maxima

How much are OEM 18"s worth?

Thread Tools
 
Search this Thread
 
Old Nov 14, 2014 | 06:13 AM
  #1  
andremike's Avatar
Thread Starter
Member
 
Joined: Nov 2014
Posts: 181
How much are OEM 18"s worth?

I have a second set of 18" rims from my 2012 Maxima. They have some discolorization and curb rash. They are light silver How much would they be worth?

I was thinking about using them to send in to one of those companies that offers a wheel exchange. I was looking at getting the chrome ones for my car at $800.00 What do you guys think of the chrome version? Anyone have any pics with the chrome wheel they can post?

Mike
Old Nov 14, 2014 | 07:02 AM
  #2  
andremike's Avatar
Thread Starter
Member
 
Joined: Nov 2014
Posts: 181
Oh and how do you get that stupid paper/glue whatever off on the factory wheels? There is this tab on on each wheel

Mike
Old Nov 14, 2014 | 07:22 AM
  #3  
BIGIRISHSTL's Avatar
Senior Member
 
Joined: Jun 2014
Posts: 561
As far as trading them in I wouldn't know but I would look at the classified section to get some ideas as I have seen some OEM wheels on there recently. The trade part depends on if you are getting refurbed wheels that have been redone with the finish you want or new. Like the propane exchange, you don't know how full they are and you can tell the cans are old sometimes by the paint job.

As far as the tabs, goo gone and elbow grease is how I've gotten these off in the past. You have to be careful not to use something too abrasive or harsh as the clear can come off...then again if you're trading them they probably don't care since they will refinish them and sell them anyway. Good luck.
Old Nov 14, 2014 | 07:44 AM
  #4  
andremike's Avatar
Thread Starter
Member
 
Joined: Nov 2014
Posts: 181
Originally Posted by BIGIRISHSTL
As far as trading them in I wouldn't know but I would look at the classified section to get some ideas as I have seen some OEM wheels on there recently. The trade part depends on if you are getting refurbed wheels that have been redone with the finish you want or new. Like the propane exchange, you don't know how full they are and you can tell the cans are old sometimes by the paint job.

As far as the tabs, goo gone and elbow grease is how I've gotten these off in the past. You have to be careful not to use something too abrasive or harsh as the clear can come off...then again if you're trading them they probably don't care since they will refinish them and sell them anyway. Good luck.
I have 2 sets of factory 18's. The original ones from my 2012 and then I just bought a brand new set from a 2014 maxima. The brand spanking new ones have that stupid tab. Almost seems painted on.

I posted my original 2012 wheels on CL for $400.00 and i am getting alot of responses already. just wondering if i listed them to low.
Old Nov 14, 2014 | 09:10 AM
  #5  
MaximaDrvr's Avatar
Senior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 1,269
From: Charlotte, NC
I sold mine for $300, after no hits at $400.
Don't think you are priced too low.
Old Nov 14, 2014 | 10:17 AM
  #6  
andremike's Avatar
Thread Starter
Member
 
Joined: Nov 2014
Posts: 181
does anyone see a reason to save my second set of OEM wheels? Save it for a spare? Save them in case 1 gets damaged.. IDK anything?
Old Nov 15, 2014 | 06:51 AM
  #7  
BIGIRISHSTL's Avatar
Senior Member
 
Joined: Jun 2014
Posts: 561
A second set of rims could be useful if you track or live in a seasonal spot where you could use winter tires. Also as winter tires they could be your winter rims so your chrome is not exposed to salt etc. You could trade those in on your new set of rims you want or have them powdered or painted for a completely different look to the car. Otherwise, they will take up room in your garage or basement! It's a good problem to have.
Old Nov 24, 2014 | 11:00 AM
  #8  
andremike's Avatar
Thread Starter
Member
 
Joined: Nov 2014
Posts: 181
no dice

I guess I am going to let them go... been hesitent.. still hesitent.



I also got that stupid tab off the rim with goo-off.
Old Nov 25, 2014 | 04:14 AM
  #9  
VVhite-0ut's Avatar
Member
 
Joined: Mar 2014
Posts: 283
From: Pittsburgh, PA
Originally Posted by MaximaDrvr
I sold mine for $300, after no hits at $400.
Don't think you are priced too low.
Did you sell those as wheels/tires from stock? Or just the wheels?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Forge277
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
12
Jun 13, 2016 09:26 PM
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
6
Oct 5, 2015 10:40 AM
atriuum
4th Generation Classifieds (1995-1999)
3
Sep 28, 2015 01:19 PM




All times are GMT -7. The time now is 03:04 PM.