Valve-body mod
#4
Originally Posted by pfactor172
I plan on adding nitrous to my Max 01se . I know I should do a drop resister mod and trans cooler but what is a valve-body mod? nitrous
but if you can afford it. why not its a beautiful mod. i ran a 70 shot without either and it didnt cause any problems..
#5
Supporting Maxima.org Member
iTrader: (10)
The VB Mod is a compromise between everyday driving and racing.
The drop resistor mod allows you to have FULL line pressure while racing and stock for everyday, thats why I prefer it. Just make sure to put it on a WOT switch so it is never in use for part throttle.
A tranny cooler is also a must, for me anyway and get a B&M they are the best because of the built in by-pass for hot-cold operation, the Hayden doesn't have that feature. Plus they are a much sturdier construction.
The drop resistor mod allows you to have FULL line pressure while racing and stock for everyday, thats why I prefer it. Just make sure to put it on a WOT switch so it is never in use for part throttle.
A tranny cooler is also a must, for me anyway and get a B&M they are the best because of the built in by-pass for hot-cold operation, the Hayden doesn't have that feature. Plus they are a much sturdier construction.
#6
Originally Posted by Jime
The drop resistor mod allows you to have FULL line pressure while racing and stock for everyday, thats why I prefer it. Just make sure to put it on a WOT switch so it is never in use for part throttle.
#7
Supporting Maxima.org Member
iTrader: (10)
Originally Posted by Tally Max
Jime, do you have any write ups on installing at wot switch for the drop resistor mod or any sugesstions on how to do it? thanks
https://maxima.org/forums/showthread...27#post2720127
Thread
Thread Starter
Forum
Replies
Last Post
zzznightmarezz
Maximas for Sale / Wanted
0
09-21-2015 06:32 PM