Which Michelin-Pilot Sport A/S 3+s did you get?

 

heres the reciept, 1st one

 

Where did you get your hydro dipping done at?

 

I got my hydro dipping done at RPM performance in Burlington Washington. They are a local outfit by the dealership I purchased my car at

 

Just installed the diffuser. My second mod and slowly more to come (first mod I wrapped the roof guards black). I’m only 20 in college and paying it myself so money is always tight �� my diffuser is not completely flush where the 3M tape is at the corners under the tail light near motion sensors have very small gaps. Did this happen to anyone else? I’m almost certain I lined it up correctly

 

 

Stillen. I fixed it its like 99% good now. I used a blowdryer and heated the bumper/diffuser while applying more pressure so it would adhere better

 

Looks good man!!! dumped too much money on the stillen exhaust and intake, gotta wait til i get can get the cosmetic stuff

 

Thanks man! I'm more of a cosmetic guy so I like to make it look nice before performance mods next up is to slightly tint headlights/taillights, then front lip, wheels, then intake/exhaust. Might go for an intake earlier though

 

Keep an eye out for a used stillen intake if you want to save money, got mine off ebay for 80$ barely used, didnt even have to clean the filter.

 

Thanks for the heads up man! Will definitely look out for that to save big time $$$

 

How do u like ur intake and exhaust. I have them but haven't had time to install. I also got the rear sway bar as well. How many miles did u have on ur car before installing the intake and exhaust?

 

The stillen intake/exhaust combo sounds amazing together, I kept it with the stock resonator for 3 weeks and wanted it a little louder so i ended up changing to a 12" resonator. I'm happy with it now, I put it on very late.. my car had 33k miles when i installed it, would of done it way earlier if i knew how simple it was. I posted a video clip of the sound in this thread. hard to hear unless you have speakers or headphones. it's a deep sound. also an intake sound video on there too. you will notice a dramatic difference in sound once installed for sure, im sure you wont be disappointed

 

New lights behind the grill

 

Now that I like.

 

Any of you guys that are using the front splitter have any problems with it coming off yet? Im looking to install mine soon, wondering if people did anything extra to make sure it stays put? ie: nuts more tape etc


curious.. not worried about the rear diffuser coming off.

i took the chance and ordered the ikon diffuser and front splitter.. i know there are mixed reviews but I'm going to try it out..some people say its great, hmm I can't justify the stillen price right now. if it looks like junk or fitment is bad i'll be sure you tell you guys

Stillen: $823 shipped for both
ikon: $297 shipped for both..

we will see...

 

This was a big issue for me too but let me know how the front lip fits because if its good then i might just do that instead! Will stay posted

 

with something that requires glue and tape, I would take it to have professionally installed. Make them use more screws in the areas that usually detach. Just my 2 cents, take it for what its worth.

 

yeah most people do it themselves, i considered having it professionally installed so i have no issues, assuming they know what they are doing.. not even sure how to go about looking for a shop that would do that though

 

Resonator delete, quad exhaust tips, 20% tint.

 

looks sick man, how do you like the resonator delete? I went with a tiny 12" resonator instead of a full delete. would of been way cheaper to just delete it but i was worried the drone would be too much

 

I like it. It sounds nice when I start the car and it's definitely the sound i wanted. As far as drone I don't hear it city driving and on the highway I can hear it a little bit only if the radio is off

 

Do you have a video of the sound and revs?

 

https://www.youtube.com/channel/UCb_...GlcqjbeyoHhB2g

 

Where did u find the quad tips?

 

found em on eBay by searching for "4.0 quad exhaust tips" the inlet size on the tips I got are 2.5" with each tip outlet at 4".

 

Having the roof wrapped gloss black!

 

roof wrap came out nice. $250

 

Well my ikon diffuser and lip came in today... looks okay... test fitment seems alright. Need to decide if i want to try install it myself or look for a bodyshop.. hmm

 

Just got my maxima a month ago now and excited. Changed the front blinkers, Fog LEDs, back blinkers and brake light LEDs, backup light LED, and all interior LEDs.

Tip: If you are going to change the front blinkers and the fog lights, do them at the same time because you will have to remove the front bumper for the turn signals and have access to the fog lights. If you change the fog lights only, go from underneath. Don't do the wheel well access that you see on youtube.

Before changing to LED Fog
After LED replacement. Left rear blinker LED, brake light also changed.

 

 

I did not use any resistors on the car. These anti hyperlink LED bulbs by iJDMTOY work as advertised:
I'm not a fan of the switch back mod, and I did not want to open the headlight housing to install that mod either. The LED's are very bright anyway.

 

 

Cf rear window spoiler



20x8.5 Giovanna wheels

 

Did you ever get it installed? Hows the fitment?

 

great thread !!! keep the mods coming !!

 

Ok, not really "mods", but I recently got the cup holder lights that say Nissan. Ordered them off Amazon for $20, took about 4 weeks to arrive from China, but they look great for the price.

Also just got the back seat Weathertech mat. Was originally planning on getting Weathertech mats, but the dealer threw in the Maxima rubber mats so I didn't bother. Finding the back seat carpet taking a beating this year (doesn't seem to be good quality) with my kids getting in and out with all the snow, wet sludge, and such. Love how it covers pretty much everything. Nice piece of mind.

 

I ordered a pair, coming next week. What was the easiest way to access the bulbs? Looks like you can't get it from the top, and wheel well seems like it may be too far to reach. Did you drop the bumper or unscrew the headlight assembly.? thanks!

 

 

wonderful, how fun..