When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The day after I added my new badges a Chevy Camaro SS who was accelerating to slow got butt hurt when I tried to pass him and decided to race me. FYI he didn't prevail.
The day after I added my new badges a Chevy Camaro SS who was accelerating to slow got butt hurt when I tried to pass him and decided to race me. FYI he didn't prevail.
That was not a SS. That looked like a V6 Camero which the Maxima would beat. The V8 would leave you in the dust if it was a SS. Morons also like to put on SS badging even though it is a V6. I believe this was the case if you seen SS badging. Nonetheless. How humbling it must feel to get burned by a family hauler when driving a Camero. Embarrassing. Yeah I just made the video full screen and see the fake SS badging. That was not a real SS.
Last edited by FattiesGoneWild; May 20, 2018 at 04:38 PM.
17’ SV
20% tint
20” JNC black wheels 245/45/20
Muffle delete straight pipe w/ stock tips n resornator
Ikon sports front splitter
Chrome side mirror trim markers
Candy apple red metallic painted calipers w matching SV badge. Pending white Nissan decal for calipers
LED 6k reverse,license,trunk,door markers, feet lighting, fog lights
55w HID opt7 6k kit with wiring harness low beams
LED high beams
Black wood grain vinyl wrap interior trim/dash
I wanted to share with the group that I had no luck receiving any replies from Racingline. I wanted to purchase their endlinks for my 2016 maxima. I was able to find a universal kit very similar to that of Racingline. I had to make sure the universal kit was applicable to the 2016 Maxima by measuring the length of the OEM endlinks and the diameter of the studs. For the front endlinks, the measurement is 11.77" with a stud diameter of 12mm. For the rear endlinks, the length is 2.95" with a stud diameter of 10mm. I then went to Whiteline's website. These links are similar to those of Racingline. I cross check their endlinks sizes and was able to find a match. The part number for the fronts are KLC 180-295 Suggested Retail price of +/- $136. Part number for the rears is KLC-140-060, same price. I am going to order these along with Godspeed Mono Coilovers. I already have the Stillen RSB and just purchased the Curva C7 Silver wheels (19 x 8.5 with a 35mm offset for front and rear on 255/40/19 tires. Will later post pictures of the setup.
i wanted to share with the group that i had no luck receiving any replies from racingline. I wanted to purchase their endlinks for my 2016 maxima. I was able to find a universal kit very similar to that of racingline. I had to make sure the universal kit was applicable to the 2016 maxima by measuring the length of the oem endlinks and the diameter of the studs. For the front endlinks, the measurement is 11.77" with a stud diameter of 12mm. For the rear endlinks, the length is 2.95" with a stud diameter of 10mm. I then went to whiteline's website. These links are similar to those of racingline. I cross check their endlinks sizes and was able to find a match. The part number for the fronts are klc 180-295 suggested retail price of +/- $136. Part number for the rears is klc-140-060, same price. I am going to order these along with godspeed mono coilovers. I already have the stillen rsb and just purchased the curva c7 silver wheels (19 x 8.5 with a 35mm offset for front and rear on 255/40/19 tires. Will later post pictures of the setup.
This is the same brand that’s sells the one I bought from eBay advancetuning and ikonsports listed this same one splitter lip with same pics n price on eBay, and it’s pretty much the same as Stillens but I didn’t pay that much, it was like $129, got in like almost 4 months ago. Not sure why they are $100 more now from your link, Stillen wants too much for there’s tho
Last edited by Wolfson23; May 23, 2018 at 09:43 AM.
This is the same brand that’s sells the one I bought from eBay advancetuning and ikonsports listed this same one splitter lip with same pics n price on eBay, and it’s pretty much the same as Stillens but I didn’t pay that much, it was like $129, got in like almost 4 months ago. Not sure why they are $100 more now from your link, Stillen wants too much for there’s tho
Heard the fitment on those cheaper ones is horrible.
Just installed a pedal commander, it's awesome. no throttle lag. sport plus a bit too intense though until I get used too it, way to easy to spin the tires
Just installed a pedal commander, it's awesome. no throttle lag. sport plus a bit too intense though until I get used too it, way to easy to spin the tires
20x8.5" Lexani wheels, carbon fiber roof wing, painted tail lights. LED H11 bulb to replace factory bulb Painted headlights and fog lights. I'm still waiting on my stillen front lip and side skirts to come in. Only thing I'll be missing cosmetically that I want is the diffuser and the trunk spoiler.
20x8.5" Lexani wheels, carbon fiber roof wing, painted tail lights. LED H11 bulb to replace factory bulb Painted headlights and fog lights. I'm still waiting on my stillen front lip and side skirts to come in. Only thing I'll be missing cosmetically that I want is the diffuser and the trunk spoiler.
Stillen axle back exhaust
Stillen cold air intake
All exterior lights upgraded to LED
Pending lowering kit (springs in the trunk) " />Rohana staggered rims 19"
Stillen axle back exhaust
Stillen cold air intake
All exterior lights upgraded to LED
Pending lowering kit (springs in the trunk) My most expensive mod - the damn headlights.... Worth it though.
Installed starry eye halos, switchback drl from diode dynamics, smoked all the lenses. Only expensive because first set of headlights melted 🤣. View from the operating table
Here are some mods I did to my 2016 Nissan Maxima SR: lowered 1.4" in front and rear with Eibach lowering springs, replaced stock rims with black concave rims (no manufacturer name), 35% tint (what is legal in MD), AVS window wind deflectors and cold air intake from K&N, sounds great from inside the car.Daytime at home In parking garage
Hey guys just picked up this Max' last August and have been enjoying it thus far!
Just a few minor cosmetic changes thus far:
Full chrome delete - gloss black wrap.
•Door handles , Window trim , Grille , Rear chrome and roof.
Caliper painted.
Rims coated.
20% front window tint and Limo throughout the back.
Now just waiting on my stillen parts!
Last edited by Kenan Llenes; Oct 14, 2018 at 02:15 PM.
Has anyone tried the akebono brake kit from z1 motorsports? I got 20" Ultra Platinum Smooth Trip wheels and Continental extreme contact tires (getting rubbing while turning). I am trying to figure out if the BBK will fit with these wheels. Also, any recommendations for rim protectors?
Rear springs adjusted & front lip/rear diffuser installed
Whats up all?!
Just wanted to post pics of w/ & w/out front lip & rear diffuser. I was gonna wrap em in carbon fiber but ended up getting them painted. If any ppl close to St Louis like how they came out, I took them to Maaco in Kirkwood. $400 for both. The body shop my local stealership uses, quoted me $625 so I'm happy w/ how they turned out.
Also attaching a pic of how much I had to cut off my rear lowering springs to sit even w/ the front. I didnt want to but this was my 2nd set from Eibach & got the same result as the first, both sets sat the rear about 3/4" higher then the front. I found some info online that if you do it correctly & have the right springs(which pro-kit is-Tangential) then it allows you to get the height where you want it. Initially, I took off half of the distance you want to lower, so in my case I needed it to come down 3/4" so I took off 3/8" but it made no difference so I took off another 3/8" & voila, it now sits even w/ the front. Very happy I dont have to f*ck w/ them again AND I have the first set Eibach sent me that were only on the car 2 months. Selling for $100 plus shipping if anyone is interested, I'll post em tomorrow in the for sale section. ; )
Rohana RFX5 19x8.5 Silver wheels with 35mm offset.
BC racing coil-overs-not sure of the # of inches it’s lowered but that’s how so wanted it.
35% all around window tint.
Powerstop Z23 Evolution Sport Drilled and Slotted Front and Rear Brake Kit - initially had the big brake kit with Akebono calipers but went back to OE due to the subtle squeaking from the big brake setup that was driving me crazy...pun not intended. If anyone’s interested in getting them I still have then packaged.
Future Mods:
Stillen rear diffuser and front lip splitter.
Last edited by jahlove74; Dec 7, 2019 at 02:29 PM.
Yeah I just made the video full screen and see the fake SS badging. That was not a real SS.
