I Need Honest Advice On Pulley Size For V2
#1
Guest
Posts: n/a
I Need Honest Advice On Pulley Size For V2
well i got jay's V2 laying here...waiting to go in...
hes got a 3.25 pulley..laying in there...
now i got a 96 SE auto ...
with 79k miles on it ..
Jeff's VB mod with Tranny Cooler On it ...
My ? Is...
3.25 pulley..or leave it @ stock size 3.60
i dont wanna blow my tranny into pieces....
i wanna play it safe...
jay had this set up...wit the 3.25
but who knows...
i just want some good advice...
- Will
hes got a 3.25 pulley..laying in there...
now i got a 96 SE auto ...
with 79k miles on it ..
Jeff's VB mod with Tranny Cooler On it ...
My ? Is...
3.25 pulley..or leave it @ stock size 3.60
i dont wanna blow my tranny into pieces....
i wanna play it safe...
jay had this set up...wit the 3.25
but who knows...
i just want some good advice...
- Will
#4
Re: Re: I Need Honest Advice On Pulley Size For V2
Originally posted by RBa
I'll said it a 1000 times and I'll say it for the 1001th time.. Go with the dam 3.60 and keep your tranny from blowing..
I'll said it a 1000 times and I'll say it for the 1001th time.. Go with the dam 3.60 and keep your tranny from blowing..
3.25 , if you dont you will regret. Then what are you looking at....hmm.....alot of hours taking it back off and putting it back on.Its yours do what you want.
#5
Guest
Posts: n/a
Re: Re: Re: I Need Honest Advice On Pulley Size For V2
Originally posted by 96shogunmax
3.25 , if you dont you will regret. Then what are you looking at....hmm.....alot of hours taking it back off and putting it back on.Its yours do what you want.
3.25 , if you dont you will regret. Then what are you looking at....hmm.....alot of hours taking it back off and putting it back on.Its yours do what you want.
i dont want that problem!
#9
Originally posted by GoldenGlory
by the way ..
im a everyday driver...
mostly from home to work then back home..
days im out...juss B/S driving nuttin serious...
1-2 times a week..ill be messin around..when im out with the fellas..
by the way ..
im a everyday driver...
mostly from home to work then back home..
days im out...juss B/S driving nuttin serious...
1-2 times a week..ill be messin around..when im out with the fellas..
#11
Re: Re: I Need Honest Advice On Pulley Size For V2
Originally posted by RBa
I'll said it a 1000 times and I'll say it for the 1001th time.. Go with the dam 3.60 and keep your tranny from blowing..
I'll said it a 1000 times and I'll say it for the 1001th time.. Go with the dam 3.60 and keep your tranny from blowing..
#12
Re: Re: Re: I Need Honest Advice On Pulley Size For V2
Originally posted by PCGuRu2K
Will.. I had the 3.33 and I blew my tranny about 1 month after using it.. Auto's just can't hold up when you run that much boost.. But then again there is a huge difference going from a 3.6" to a 3.125".. Boost is addicting, you always want more power.. Hey I got the stock 3.6 still here.. I'll even trade ya on the 3.125". I wanna go smaller
Will.. I had the 3.33 and I blew my tranny about 1 month after using it.. Auto's just can't hold up when you run that much boost.. But then again there is a huge difference going from a 3.6" to a 3.125".. Boost is addicting, you always want more power.. Hey I got the stock 3.6 still here.. I'll even trade ya on the 3.125". I wanna go smaller
Too bad.. I got 1st dibs..
JK...
#13
I couldn't fix your brakes, so I made your horn louder
iTrader: (6)
Join Date: Jan 2002
Posts: 2,588
Re: Re: Re: Re: I Need Honest Advice On Pulley Size For V2
Originally posted by RBa
Hahahha.. I knew you would wanna trade..
Too bad.. I got 1st dibs..
JK...
Hahahha.. I knew you would wanna trade..
Too bad.. I got 1st dibs..
JK...
Tranny is fine....
Boost has only been in for about a month
#14
Just stick with the 3.25
I have gone through two SC. Yes two. My tranny is holding up fine. I have a '96 auto with Don's VB and tranny cooler as the only tranny mod. I had a 3.125 pulley on both the V2 and V1 SC. I started out with the 3.33 on the V2 though. Btw, I definitely did not take it easy on the car with the SC. Maybe I'm lucky that my tranny hasn't blown yet. If I kept the SC, my next step would have been swapping in the 2.87" pulley. So go with the smaller pulley, the stock 3.60" won't be enough, it will feel weak IMO.
Btw, if anyone want, I still have the 2.87" pulley for sale.
I have gone through two SC. Yes two. My tranny is holding up fine. I have a '96 auto with Don's VB and tranny cooler as the only tranny mod. I had a 3.125 pulley on both the V2 and V1 SC. I started out with the 3.33 on the V2 though. Btw, I definitely did not take it easy on the car with the SC. Maybe I'm lucky that my tranny hasn't blown yet. If I kept the SC, my next step would have been swapping in the 2.87" pulley. So go with the smaller pulley, the stock 3.60" won't be enough, it will feel weak IMO.
Btw, if anyone want, I still have the 2.87" pulley for sale.
#16
Go with the smaller pulley, you'll regret having to pay to get it swapped later or having to do it yourself. With the stock pulley, you feel it, but it doesn't improve performance that much.
You can have the smaller pulley, just get a boost gauge and watch your boost level. Just because you can make 10 psi, doesn't mean you have to everytime you boost. But having the extra power available will come in handy .
You can have the smaller pulley, just get a boost gauge and watch your boost level. Just because you can make 10 psi, doesn't mean you have to everytime you boost. But having the extra power available will come in handy .
#17
Originally posted by RBa
I guess there is a car god. Too bad he only likes 4thgeners..
If his tranny blows, I'm gonna host a fund raiser.. U guys donate.!!
I guess there is a car god. Too bad he only likes 4thgeners..
If his tranny blows, I'm gonna host a fund raiser.. U guys donate.!!
#18
Supporting Maxima.org Member
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Originally posted by PCGuRu2K
Yeah that's weird.. It's seems like boosted auto 4thgen's have stronger tranny's for some reason
Yeah that's weird.. It's seems like boosted auto 4thgen's have stronger tranny's for some reason
My opinion, leave the 3.25 pulley in there. Your foot will determine how long your tranny lives. Just by having the pulley in there does not mean your car will boost all the time. You can be on the freeway running 110MPH and never boost. I hope you understand that. You punch it hello boost you drive normally no boost. I have the 3.25 driving normally all I see is vacuum 5Hgs plus<---just an example.
#19
Originally posted by JAY25
My opinion, leave the 3.25 pulley in there. Your foot will determine how long your tranny lives. Just by having the pulley in there does not mean your car will boost all the time. You can be on the freeway running 110MPH and never boost. I hope you understand that. You punch it hello boost you drive normally no boost. I have the 3.25 driving normally all I see is vacuum 5Hgs plus<---just an example.
My opinion, leave the 3.25 pulley in there. Your foot will determine how long your tranny lives. Just by having the pulley in there does not mean your car will boost all the time. You can be on the freeway running 110MPH and never boost. I hope you understand that. You punch it hello boost you drive normally no boost. I have the 3.25 driving normally all I see is vacuum 5Hgs plus<---just an example.
#20
Guest
Posts: n/a
Originally posted by PCGuRu2K
Good point there.... Maybe it's just me.. I seem to have a heavy foot
Good point there.... Maybe it's just me.. I seem to have a heavy foot
j/k
well imma jeff inspect the pulley be4 the install...
if hes sayd good to go ...its in ..if not..then i will have to rob another bank
#21
Re: Re: Re: Re: Re: I Need Honest Advice On Pulley Size For V2
Ditto here, only I'm a wimp with a 3.33" pulley for now. Went S/C'd on the July long weekend, and went 3.33 in November. The tranny has held up just the same as with the 3.6" - just remember it depends on your driving too!
Car has 91,000km's, blower installed at 68,100km's! You figure it out in miles
Car has 91,000km's, blower installed at 68,100km's! You figure it out in miles
Originally posted by seximagtr
I went straight to the 3.125 inch pulley... and it's sweet.
Tranny is fine....
Boost has only been in for about a month
I went straight to the 3.125 inch pulley... and it's sweet.
Tranny is fine....
Boost has only been in for about a month
#23
Originally posted by GoldenGlory
anyone esle ?
anyone esle ?
powerwise - 3.125
save your tranny - 3.6
but remember, SC is linear power increase and you will feel the power at highend. With a 3.6, you prob will see a 5 psi near redline at WOT. You will not be happy with all the money you've spent. Plus it is hard to go to the redline with auto tranny on 1st and 2nd unless you manual shift. I was going to go for the 3.6 initally and my seller told the same thing as I mentioned here.
IMO - 3.33 with CAI.
my 3.33 with stillen intake gets 7 psi at 6000 2nd gear and 5 psi at 5500 on 3rd.
about your tranny....like many others suggested to you. Driving style affects it the most. I would also consider the age/condition of your tranny and your past driving style (were you a stop light to stop light racing freak??). If you shift like a granny, even with a 2.87 pulley, it will not hurt your tranny.
#25
Stay with the 3.25. Jay25 has a very good point about how you can go really fast and not boost at all, and yea, your foot will determine how long your tranny holds up. For me my tranny was already on its way out when the SC w/ 3.33" went in, I lost 1st and reverse after the first month, but then again boosting almost like 3 times a day for the first 2K miles didn't do good either. Boost is addicting, but after my tranny rebuild I decided to lay off the pedal a little, at least until I find all the parts for the 5-spd conversion which I'm in no hurry right now. If you could possibly convert before installing the SC, that could be cool, that's one thing I would have done before installing my SC. But yea, I couldn't see how I would have gone with the stock 3.6", I'm pretty sure the stock pulley would have blown my tranny too.
-Ben
-Ben
#28
Originally posted by Cumalot
Just stick with the 3.25
I have gone through two SC. Yes two. My tranny is holding up fine. I have a '96 auto with Don's VB and tranny cooler as the only tranny mod. I had a 3.125 pulley on both the V2 and V1 SC. I started out with the 3.33 on the V2 though. Btw, I definitely did not take it easy on the car with the SC. Maybe I'm lucky that my tranny hasn't blown yet. If I kept the SC, my next step would have been swapping in the 2.87" pulley. So go with the smaller pulley, the stock 3.60" won't be enough, it will feel weak IMO.
Btw, if anyone want, I still have the 2.87" pulley for sale.
Just stick with the 3.25
I have gone through two SC. Yes two. My tranny is holding up fine. I have a '96 auto with Don's VB and tranny cooler as the only tranny mod. I had a 3.125 pulley on both the V2 and V1 SC. I started out with the 3.33 on the V2 though. Btw, I definitely did not take it easy on the car with the SC. Maybe I'm lucky that my tranny hasn't blown yet. If I kept the SC, my next step would have been swapping in the 2.87" pulley. So go with the smaller pulley, the stock 3.60" won't be enough, it will feel weak IMO.
Btw, if anyone want, I still have the 2.87" pulley for sale.
#32
Originally posted by GoldenGlory
well looks like it will stay...
jay25..will buy me a new tranny if anything
thanx alot bro
well looks like it will stay...
jay25..will buy me a new tranny if anything
thanx alot bro
So test it out bro, with the smaller pulley.
#35
Originally posted by GoldenGlory
legend boys place in the city...i see it coming!
legend boys place in the city...i see it coming!
Someone is selling their S/C b/c he blew his tranny and other reasons.
He had a 3.25 pulley..
http://forums.maxima.org/showthread....eadid=181821:p
#36
Originally posted by RBa
Yo Will,
Someone is selling their S/C b/c he blew his tranny and other reasons.
He had a 3.25 pulley..
http://forums.maxima.org/showthread....eadid=181821:p
Yo Will,
Someone is selling their S/C b/c he blew his tranny and other reasons.
He had a 3.25 pulley..
http://forums.maxima.org/showthread....eadid=181821:p
#39
Guest
Posts: n/a
Originally posted by RBa
Yo Will,
Someone is selling their S/C b/c he blew his tranny and other reasons.
He had a 3.25 pulley..
http://forums.maxima.org/showthread....eadid=181821:p
Yo Will,
Someone is selling their S/C b/c he blew his tranny and other reasons.
He had a 3.25 pulley..
http://forums.maxima.org/showthread....eadid=181821:p