Yes a 5th gen Supercharger will fit a 4th gen maxima except one pipe
11-30-2003 | 08:02 PM
#1
Thread Starter
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Yes a 5th gen Supercharger will fit a 4th gen maxima except one pipe
For you guys that dont know today I was working on my motor. Made lots of progress. All of a sudden Dixit (Bigdogjohnx) drops buy and looks at my new project. We talk and all of a sudden I forgot
the motor is out. Test fitted the 5th gen supercharger plate and everything lined right up. I even place two of the bolts in. Perfect fit. The only thing that does not fit is the top cross over pipe to the throttle plate. That is the only thing that wont fit. Stay tuned as I will post pictures as soon as I am done with my motor project.
I had this supercharger for quite a while now. Was going to Soup up the daily driver (sleepy) as we call it. I may sell it now since the motor set me back with all the BS I had to buy to include the engine hoist, engine stand, and a bunch of parts to replace while the engine is out. How ever if my brother comes up with the cash the blower is his since it has some shine to it.
the motor is out. Test fitted the 5th gen supercharger plate and everything lined right up. I even place two of the bolts in. Perfect fit. The only thing that does not fit is the top cross over pipe to the throttle plate. That is the only thing that wont fit. Stay tuned as I will post pictures as soon as I am done with my motor project. I had this supercharger for quite a while now. Was going to Soup up the daily driver (sleepy) as we call it. I may sell it now since the motor set me back with all the BS I had to buy to include the engine hoist, engine stand, and a bunch of parts to replace while the engine is out. How ever if my brother comes up with the cash the blower is his since it has some shine to it.
11-30-2003 | 09:02 PM
#3
Yeap, no reason it wasnt going to fit, but I had a fairly good feeling that the MAF was no where near the same spot as the 4th gens. And Jaime proved it by putting up the charged pipe.
I told him it would be fairly easy to make the pipe. I can weld one up really quickly and easy.
Dixit
I told him it would be fairly easy to make the pipe. I can weld one up really quickly and easy.
Dixit
11-30-2003 | 10:38 PM
#4
Originally Posted by BigDogJonx
Yeap, no reason it wasnt going to fit, but I had a fairly good feeling that the MAF was no where near the same spot as the 4th gens. And Jaime proved it by putting up the charged pipe.
I told him it would be fairly easy to make the pipe. I can weld one up really quickly and easy.
Dixit
I told him it would be fairly easy to make the pipe. I can weld one up really quickly and easy.
Dixit
Well that's pretty freakin' cool. You guys are just running your own version of Monster Garage !
12-01-2003 | 07:32 AM
#6
Thread Starter
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by BigDogJonx
Hahha, we can only dream to be like Jesse James. We can only strive to even come 1/10th of like him.
Dixit
Dixit
You have the skills to weld, if you redid your kit, how hard would it be to custom make our own 2.5-3 inch cross over? Just a bit of patience
12-01-2003 | 12:51 PM
#9
Thread Starter
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by Street Reeper
I wondered if my 4th gen kit would fit on a 5th gen (00-01.) Looks like it will other than maybe the pipe.
I added some pictures check them out
, they are on the first post. Finally got cleaned out the PC
12-01-2003 | 01:12 PM
#10
Originally Posted by 96shogunmax
welding is the easy part if you went to school for it.
Dixit
12-01-2003 | 07:43 PM
#12
Thread Starter
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by bijan gxe
JAY25 w/ 2 boosted 4th gens
not fair
not fair
check it out I am about to look for a 3.25 pulley. Thats my favorite size pulley
12-01-2003 | 09:01 PM
#13
Originally Posted by BigDogJonx
If my garage and few days a week and a few nights of the smoke detector going off and shiet is school, then Yes I went to school.
Dixit
Dixit
I took welding for a year , thats what I was referring to.
12-01-2003 | 09:40 PM
#14
Originally Posted by 96shogunmax
I took welding for a year , thats what I was referring to.
Dixit
12-03-2003 | 08:37 AM
#20
Originally Posted by JAY25
I added some pictures check them out, they are on the first post. Finally got cleaned out the PC
, they are on the first post. Finally got cleaned out the PC
12-06-2003 | 02:30 AM
#23
Originally Posted by JAIMECBR900
What size is that? Is it a 6 or 8 rib? V1 or V2?
All 5th gen superchargers are V2s. Also all the maxima vortech s/c for the maxima are 6rip cause the main crank pulley is 6rib
Dixit
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
Greenmaxspeed
4th Generation Classifieds (1995-1999)
6
08-31-2015 09:06 PM
ViciousVQ30
4th Generation Classifieds (1995-1999)
0
08-05-2015 05:40 PM