FS: *NEW* V1 S/C Plate Kits... - Maxima Forums

Go Back  Maxima Forums > Advanced Performance > Supercharged/Turbocharged
Reload this Page >

FS: *NEW* V1 S/C Plate Kits...

Supercharged/Turbocharged The increase in air/fuel pressure above atmospheric pressure in the intake system caused by the action of a supercharger or turbocharger attached to an engine.
Sponsored by:
Sponsored by:

FS: *NEW* V1 S/C Plate Kits...

Old 12-19-2005, 03:05 PM
  #1  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
FS: *NEW* V1 S/C Plate Kits...

For more Information Please Check here. http://forums.maxima.org/showthread.php?t=312870

Part list other than my Kit needed: http://forums.maxima.org/showthread.php?t=341026

As you know Stillen has discontinued the Supercharger kit for the 95-01 Nissan Maxima. The only real way to get a Supercharger kit for your maxima is to buy it used, or build your own kit. Well finding a plate that works with the Vortech blower is kind of tough...

For the past few months I have been gauging interest on a plate kit that is an Exact Replica of the 9 year old V1 Plate that Stillen Produced. This plate is notorious for being Really Reliable, unlike the comman V2 Kits that have melting pullies and Shredding Belt Problems.
The V2 Plates are made of Aluminum and when exposed to heat, it tends to shift a tad bit while boosting. While the plate is slowly moving away from the motor, that crucial blet alignment, that you spent hours getting perfect with shims and washers (on the V2 kit only), tends to get out of wack and shredding your belt is very comman.

The major advantage in buying the kit directly from me is that you will have a Super Reliable SuperCharger Kit, NO shredding Belt Issues, and the Major advantage is that you can build a kit on a budget. Spending $3500 from Stillen was never fun. With this kit, you can have a Full Kit, the way you like it, for less then $2500...

The Plate Kits are professional made by a CNC Machinest. They are an exact replica of the 12 year old V1 Kit that was sold by Stillen.


**V1 Full Starter Kit:**

-V1 Steel Plate
- Modified Aluminum Thermostat Housing (Welded and Pressure Tested)
- NEW Nissan Thermostat
- NEW Nissan Thermostat Gasket
- Fenner Drive Idler Pulley (Rare pulley, Stillen used these)
- Pulley Bearing Spacer
- Idler Pulley Bolt
- Full Bolt Kit...
...All Bolts Needed:
**Plate to Blower
**Plate to Engine
- Nissan Modfied Drain Back Housing


V1 Starter Kit Price:

$1620 + Shipping and paypal fees
+$150 Optional Nickle Coating




**V1 Convertion Kit:** Converting From V2 To V1 Due to Belt Shredding Issues**Very Common with the V2 Kits**

- V1 Steel Plate
- Modified Aluminum Thermostat Housing (Welded and Pressure Tested)
- NEW Nissan Thermostat
- NEW Nissan Thermostat Gasket
- Fenner Drive Idler Pulley (Rare pulley, Stillen used these)
- Pulley Bearing Spacer
- M8X40mm Alternator Bolt
- Idler Pulley Bolt


$1225 + Shipping and paypal fees
+$150 Optional Nickle Coating


**STILLEN used to sell JUST the V2 plate for $1025 + shipping and $825 with a discount...and that was for the V2 plate ALONE**

Building Your Own Kit:

Here is a list of What you will need, besided my V1 Starter Kit:

Complete Parts List and Prices: http://forums.maxima.org/showthread.php?t=455158

Feed line, Rubber Drain Line, Fittings + Couplings, Rubber Power steering lines (Any Auto Parts Store), Vortech V1 or V2 Blower (Counter Clockwise Rotation, Straight Discharge), Charge Pipe 3" or 2.5", FMU (Vortech or Cartech), Fuel pump (Walbro In-tank), BOV (any type you want). All these can be had for < $1200 including blower

Optional Nickle Coating


Payment Options:


[email protected]
Paypal (add 3%), Money Order, Personal Check.
Once you get a shipping quote from me, and I recieve the money via paypal or money order, the kit will ship following business day


[SIZE="2"]**If you have ANY questions, feel free to PM me, post up on the original thread http://forums.maxima.org/showthread.php?t=417703 or call me.
**973-557-3849** SIZE]

Belt Sizes For the Kit:
These are all Gatorback Belts Website is http://www.hotrodlane.cc/PRODUCTS/goodyearbelts.htm

3.6 (stock).......4060705 6PK1790 70 1/2"--71 1/4"
3.33................4060705 6PK1790 70 1/2"--71 1/4"
3.48................4060705 6PK1790 70 1/2"--71 1/4"
3.25................4060695 6PK1765 69 1/2"--70 1/4"
3.125..............4060695 6PK1765 69 1/2"--70 1/4"
3.00................4060690 6PK1755 69 "--69 3/4"
2.87................4060690 6PK1755 69 "--69 3/4"



***Shipped Kits:***

First Run (11 Kits)

1. Slimer (Convertion Kit) Shipped 12/5/05
2. wadecarlson (Convertion Kit) Shipped 12/5/05
3. Curt (Convertion Kit) Shipped 12/18/05
4. 96sleepergle (Convertion Kit + Nickel Coating) Shipped 12/29/05
5. Slamdmax98 (Convertion Kit) Shipped 1/15/06
6. i30ds (Starter Kit + Nickel Coating) Shipped 1/20/06
7. maxima8624 AKA juani ( Starter Kit + Nickel Coating) Shipped 2/28/06
8. MyownNismo (Starter Kit) Shipped 11/6/06
9 + 10 Bob Franco + Juliet Romaro (2Full Starter Kits + Nickel Coating) Shipped 1/31/06
11. PharoNDmist (Starter Kit + Used Vortech V1 Blower) Shipped 3/28/06

Second Run (4 Kits)

1. mjk (Starter Kit + Nickel Coating) Shipped 3/28/06
2. Carlo (Conversion Kit) Picked up 4/09/06
3. Local Sale (Plate, Thermo, Drain) Shipped 4/12/06
4. Local Sale (Plate, Thermo, Drain) Shipped 4/12/06
5. Edmonius (V1 Starter Kit) Shipped 5/16/06


Third Run (14 Kits)

1. Customer1 blarg (April 30th) (V1 Conversion Kit) Shipped 9/18/06
2. Eric Holmes (V1 Conversion Kit) AOL ($770) Shipped 10/20/06 [email protected]
3. BlackCat (V1 Convertion Kit) Shipped 9/18/06
4. dfownz (V1 Starter Kit) Shipped 10/12/06
5. doublea (V1 Starter Kit) Shipped 9/29/06
6. maximasrule (V1 Starter Kit + Nickel Coating) Shipped 4/27/07
7. twoconfusedants (V1 Starter Kit) Shipped 9/23/06 [email protected]
8. NCSU_MAX (V1 Starter Kit) Shipped 11/6/06
. Sean05 (V1 Starter Kit) $300 Deposit 8/7/06 **ORDER CANCELLED**
9. Matt *** (Canada mathew.***@edu.sait.ca) (V1 Conversion Kit/Nickle Coating) Shipped 11/30/06
10. [email protected] Jeff Nard (V1 Starter Kit) Shipped 1/31/07
11. Kevin Burrowes Email order [email protected] Shipped 6/4/07
12. DanIAm (V1 Convertion Kit) Shipped 6/28/07
13. Grey00lustre (V1 Convertion Kit) Shipped 7/31/07
14. krzysztof kowalski Email Order [email protected] (V1 Starter + Nickle) Shipped 8/15/07


Forth Run (7 Kits)

1.Cli-max ($300 Deposit Paypal) (V1 Starter Kit) 8/29/07 [email protected] Shipped 3/27/08
2. iLLin-2k1 ($300 Deposit Paypal) (V1 Starter Kit) 9/2/07 Shipped 4/7/08
3. 98whitemax ($300 Deposit Paypal) (V1 Starter Kit/Full Kit) 12/10/07 [email protected]Shipped 4/7/08
4. Localsale ([email protected])(V1 Starter Kit + Nickle Coating) 1/4/08 [email protected] Shipped 3/25/08
5. scmax2000 (scmax2000 @yahoo.com) (V1 Convertion Kit) Shipped 3/17/08
6. Jordandalley (V1 Convertion Kit) Shipped 3/20/08
7. VTMaxima (V1 Starter Kit + Nickel Coating) Shipped 8/22/08


[SIZE="3"][FONT="Georgia"]Fifth Run of Kits **
1. rdoug26 (V1 Starter Kit/Nickel Coating) $300 Payment 02/20/2009 Shipped 12/2/09
. joesae01max (V1 Starter Kit/Nickel Coating) $300 Payment 01/14/2009 **ORDER CANCELLED**
2.maxima1239 (V1 Conversion Kit Shipped on 4/30/10) Paypal
3.Mista0406 (V1 Starter Kit/Nickle Coated) Shipped 02/21/11

6th Run of Kits **
1.MAXecutive (V1 Conversion Kit/Nickle/Bolt Kit) Shipped 3/4/11

2. Samuel Cruz (V1 Starter//Nickle Plating) $300 paypal recieved 07/21/11
3. 89boostedmax (V1 Conversion//Nickle Coated) Shipped 8/8/11
4. maxprivate (V1 Starter/NICKEL COATED) 04/12/13 PICKED UP

INDIVIDUAL KITS
1) charlescws (V1 Starter Kit) Shipped to JAPAN 09/28/2013
2) 8000watta (V1 Conversion/Bolt Kit) $300 deposit received 11/8/13

**PM Me, E-Mail Me, Or Call Me to Place Your Order**

Last edited by matty; 11-08-2013 at 02:56 PM.
matty is offline  
Old 12-19-2005, 03:08 PM
  #2  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Thermostat Housing

Drain Back Plate


Last edited by matty; 06-26-2008 at 02:25 PM.
matty is offline  
Old 12-19-2005, 03:27 PM
  #3  
Licensed to Spell
iTrader: (12)
 
ptatohed's Avatar
 
Join Date: Feb 2001
Location: Murrieta (southern California)
Posts: 4,508




.
ptatohed is offline  
Old 12-19-2005, 03:29 PM
  #4  
Supporting Maxima.org Member
iTrader: (89)
 
Zack342's Avatar
 
Join Date: Mar 2004
Location: Quincy, MA
Posts: 6,240
Very nice once i sell my Pioneer AVIC N2 i am so in.
Zack342 is offline  
Old 12-19-2005, 03:46 PM
  #5  
Senior Member
iTrader: (9)
 
Join Date: Apr 2004
Location: Appleton, WI
Posts: 1,748
looks great man, AWSOME job!! good to finally see some pictures and everything its been such a long wait. Cant believe somone finally came through with this theres been so many BSers around in the past couple years. AWSOME!
-Ryan
joosdawg is offline  
Old 12-19-2005, 03:49 PM
  #6  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
This is the Convertion Kit, but you can still produce a Full kit out of by adding the parts above.

You can wait, if you like, for the Drain Back plates to be made. The "Starter Kit" will include the Full V1 Plate Kit, Full Bolt Kit for Blower to Plate, and Plate to Motor, and the Custom Drain Back Plate I'm having made. That will be a tab bit more money for the "Starter Kit" compaired to the Convertion Kit
matty is offline  
Old 12-19-2005, 05:11 PM
  #7  
Hella internets
iTrader: (13)
 
XeroX's Avatar
 
Join Date: Oct 2003
Location: Sacramento, CA
Posts: 3,808
ABOUT TIME!!!!

sweet, i guess i dont have to go turbo anymore.

Might be a while till i save up the money, but this is added to my list hehe
XeroX is offline  
Old 12-19-2005, 05:51 PM
  #8  
Future Camaro SS owner
iTrader: (13)
 
MyownNismo's Avatar
 
Join Date: Dec 2001
Location: MN
Posts: 3,205
Matt I'll wait for the starter kit. Thanks again for putting this together. Now I can still reach my goal of 300HP. Look what I missed out on since I had to work this morning. My bid was for $800.00. I knew I should of stayed up till it ended.
http://cgi.ebay.com/ebaymotors/ws/eB...ABCA%3AUS%3A11
MyownNismo is offline  
Old 12-19-2005, 05:59 PM
  #9  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by MyownNismo
My bid was for $800.00. I knew I should of stayed up till it ended.
http://cgi.ebay.com/ebaymotors/ws/eB...ABCA%3AUS%3A11
I was looking at the same blower unit. The thing that steared me away from it was that the owner didnt know what Trim it was from Vortech. If its a smaller trim than the S, like the ones they use for the Civic, then you would be an Un-happy camper

Keep looking..they are on there alot

-matt
matty is offline  
Old 12-19-2005, 06:15 PM
  #10  
Future Camaro SS owner
iTrader: (13)
 
MyownNismo's Avatar
 
Join Date: Dec 2001
Location: MN
Posts: 3,205
Originally Posted by matty
I was looking at the same blower unit. The thing that steared me away from it was that the owner didnt know what Trim it was from Vortech. If its a smaller trim than the S, like the ones they use for the Civic, then you would be an Un-happy camper

Keep looking..they are on there alot

-matt
I called vortech with the serial number. It was a S trim SQ.
MyownNismo is offline  
Old 12-19-2005, 06:30 PM
  #11  
The only 4.5 gen in da 956
iTrader: (2)
 
NismoMaxman2's Avatar
 
Join Date: Apr 2004
Location: Brownsville Texas
Posts: 513
so what else would i need to complete (in other words, what else do I need to make it a complete supercharger?) my "starter kit", and what am I looking spending at for all the parts?
NismoMaxman2 is offline  
Old 12-19-2005, 06:58 PM
  #12  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by MyownNismo
I called vortech with the serial number. It was a S trim SQ.
See, that sold for $910 and it was a Polished Unit


Originally Posted by NismoMaxman2
so what else would i need to complete (in other words, what else do I need to make it a complete supercharger?) my "starter kit", and what am I looking spending at for all the parts?
Once I get the drain back Plates, the rest of the kit is very easy to peice together.

Like I stated above, everything else can be had for < $1200 Including the blower.
SS Feed line, Rubber Drain Line (nissan part), Fittings + Couplings, Vortech V1 or V2 Blower (Counter Clockwise Rotation, Straight Discharge), Charge Pipe 3" or 2.5", FMU (Vortech or Cartech), Fuel pump (Walbro In-tank), BOV (any type you want). All these can be had for < $1200 including blower

-matt
matty is offline  
Old 12-19-2005, 07:49 PM
  #13  
Rockin' VK56!!
iTrader: (15)
 
juani's Avatar
 
Join Date: Feb 2003
Posts: 1,382
I hope you'll continue producing these until i save up some money!
but it won't be long until I save up for the kit.
Very nice job!!!
juani is offline  
Old 12-19-2005, 08:12 PM
  #14  
Supporting Maxima.org Member
iTrader: (27)
 
Join Date: Aug 2004
Posts: 776
V1 Conversion Plate

Well done, my friend.
Congrats, and Merry Christmas.
Curt
Curt is offline  
Old 12-19-2005, 08:14 PM
  #15  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by Curt
Well done, my friend.
Congrats, and Merry Christmas.
Curt
Curt,

Your Kit will be shipped in the a.m.
I sent you an Email.

Keep me posted on the delivery and I will send ya a tracking #.

-matt
matty is offline  
Old 12-19-2005, 09:08 PM
  #16  
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
slimer's Avatar
 
Join Date: May 2002
Posts: 5,533
Hey guys, I have mine too. The guy added a bunch of extra welds to make the posts stronger. The edges on the plate are clearer too.

I would post my pics up, but I wasn't able to make it nice and shiny yet. I was going to use some polish to clean it completely before I paint it.
slimer is offline  
Old 12-19-2005, 09:22 PM
  #17  
Spelled with a I not a L for Iilac. Prounced Ii-eee-ack.
iTrader: (65)
 
Iilac's Avatar
 
Join Date: Dec 2000
Location: Central Valley, California
Posts: 2,432
Will this kit combined with the supercharger be carb legal?
Iilac is offline  
Old 12-19-2005, 10:55 PM
  #18  
Supporting Maxima.org Member
iTrader: (1)
 
stephenlc's Avatar
 
Join Date: Oct 2002
Posts: 3,243
Originally Posted by Iilac
Will this kit combined with the supercharger be carb legal?
Yeah I think so except you will need a blow off valve that resircolates back into the piping instead of releasing into the air.

But if you want headers which will really open this up, you won't be CARB legal.
stephenlc is offline  
Old 12-19-2005, 11:12 PM
  #19  
Jar
Donating Maxima.org Member
iTrader: (2)
 
Join Date: Oct 2004
Posts: 329
If someone were to need to wait say a year before being able to order a kit, would you still be able to supply this? or is this a short time deal?
Jar is offline  
Old 12-20-2005, 05:00 AM
  #20  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by Jar
If someone were to need to wait say a year before being able to order a kit, would you still be able to supply this? or is this a short time deal?
It all depends on how fast these sell out after the new year. I expect people to start being interested in putting money up after the holidays. I put this out a bit before the holidays to peak people interestes but I know the kind of bills people have.

If they do sell out, I can do another run of em.


Originally Posted by Iilac
Will this kit combined with the supercharger be carb legal?
Thats whats good about this kit..You can make the setup however you want.

When you get to doing the blow off valve, all you will need to do it recirculate the air out of the BOV back into the intake stream before the blower using a peice of tubing. No biggy at all
matty is offline  
Old 12-20-2005, 07:43 AM
  #21  
Kevlo for President
iTrader: (36)
 
Kevlo911's Avatar
 
Join Date: Dec 2000
Location: Lake Orion, MI
Posts: 35,779
Damn Matt, you make me want to get a Supercharger now
Kevlo911 is offline  
Old 12-20-2005, 07:58 AM
  #22  
Moderator who thinks he is better than us with his I30
iTrader: (8)
 
I30tMikeD's Avatar
 
Join Date: May 2002
Posts: 9,336
Sweet. Getting rid of the turbo and going this route!





JK......but your product looks like very nice quality from the pics. If it really is freesable to get blown form less than $1500 I can't see why ton's of people wouldn't do it. Shoot, Cattman headers would cost that much installed.
I30tMikeD is offline  
Old 12-20-2005, 01:12 PM
  #23  
Senior Member
iTrader: (6)
 
Join Date: Oct 2003
Location: Newburgh, NY
Posts: 467
Once I get the drain back Plates, the rest of the kit is very easy to peice together.

Like I stated above, everything else can be had for < $1200 Including the blower.
SS Feed line, Rubber Drain Line (nissan part), Fittings + Couplings, Vortech V1 or V2 Blower (Counter Clockwise Rotation, Straight Discharge), Charge Pipe 3" or 2.5", FMU (Vortech or Cartech), Fuel pump (Walbro In-tank), BOV (any type you want). All these can be had for < $1200 including blower

-matt[/QUOTE]

where would I be able to get the parts other than the Blower? Do you know of anyone who can make a charge pipe? Where do I get the couplers, fittings, rubber drain pipe, SS feed line?
jaemax is offline  
Old 12-20-2005, 01:53 PM
  #24  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by jaemax
where would I be able to get the parts other than the Blower? Do you know of anyone who can make a charge pipe?
YOU can make it !
22" to 24" will work
A charge pipe can easily made with 3" pipeing from ATP Turbo, or Burns Stainless. The upper bend can be made from any 3" 90 degree bend cut a bit.
http://www.atpturbo.com/Merchant2/me...egory_Code=STL


Originally Posted by jaemax
Where do I get the couplers, fittings
ATPTurbo.com for all the Silicone Couplers once you decide between 3" or 2 1/2".
http://www.atpturbo.com/Merchant2/me...egory_Code=SIL

Originally Posted by jaemax
rubber drain pipe, SS feed line?
The Rubber Drain line is a Stock Nissan part. Front bank of Cylinders, Vent Tube..I dont have the Part number. The SS Feed line can be made out of any type of SS Line. I recommend using a NOS 4ft SS Fuel feed line. It's really inexpensive at a local parts shop.


All these answers can be easily answered in the other Thread. I have alot of Valuable Information in the other thread as we discussed the additional partes needed. Alot of these parts arent writen in stone, you can do it 1000 different ways with 1000 differnt parts

-matt
matty is offline  
Old 12-20-2005, 02:20 PM
  #25  
Future Camaro SS owner
iTrader: (13)
 
MyownNismo's Avatar
 
Join Date: Dec 2001
Location: MN
Posts: 3,205
Originally Posted by slimer
Hey guys, I have mine too. The guy added a bunch of extra welds to make the posts stronger. The edges on the plate are clearer too.

I would post my pics up, but I wasn't able to make it nice and shiny yet. I was going to use some polish to clean it completely before I paint it.
Can you do something for me. Stick a magnet to it. If it stays is carbon steel. If it doesn't it's stainless. If not it's stainless. This effects my chances of electroplating it.
MyownNismo is offline  
Old 12-20-2005, 02:27 PM
  #26  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
It is Magnatized. The plates can be painted or Nickle Coated fairly easily. Doing the project in Stainless would be nearly a 1/3 more in cost

-matt
matty is offline  
Old 12-20-2005, 02:59 PM
  #27  
Future Camaro SS owner
iTrader: (13)
 
MyownNismo's Avatar
 
Join Date: Dec 2001
Location: MN
Posts: 3,205
Originally Posted by matty
It is Magnatized. The plates can be painted or Nickle Coated fairly easily. Doing the project in Stainless would be nearly a 1/3 more in cost

-matt
Yeah I'll have to powdercoat it. That's not a problem it's picking a color.
MyownNismo is offline  
Old 12-20-2005, 03:07 PM
  #28  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
The "Starter Kit" that I will add when I recieve the Drain Back plates will be a really Sweet Setup. It will include everything listed above: Plus ALL the Bolts needed for "Plate to Motor" and ALL Bolts needed for "Blower to Plate", and of course the Oil Drain Back Plate. It will be a seperate kit from the "Conversion Kit".

Remember guys, I cant setup the entire S/C kit for you ! One reason is because I dont have several thousands of dollars to go around and source parts for several kits and second, I'm in school and work 30 hrs a week. By doing it yourself, you will learn alot about your car, alot about the setup, and save a considerable amount of money.

-matt
matty is offline  
Old 12-20-2005, 04:34 PM
  #29  
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
slimer's Avatar
 
Join Date: May 2002
Posts: 5,533
Alright, time for me to post some pics.

First I will show y'all how everything came and how its wrapped.

#1: The box. How pretty.

#2: Damn thats a lot of peanuts.

#3: Thermo housing in bubble wrap, nice and safe.

#4: Fenner drive pulley. Coole.
slimer is offline  
Old 12-20-2005, 04:37 PM
  #30  
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
slimer's Avatar
 
Join Date: May 2002
Posts: 5,533
#5: Its the plate!

#6: Everything layed out.

#7: Unwrapped.
slimer is offline  
Old 12-20-2005, 04:38 PM
  #31  
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
slimer's Avatar
 
Join Date: May 2002
Posts: 5,533
Here's 8, 9, and 10, the thermo housing.


slimer is offline  
Old 12-20-2005, 04:39 PM
  #32  
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
slimer's Avatar
 
Join Date: May 2002
Posts: 5,533
I will post more later.
slimer is offline  
Old 12-20-2005, 07:21 PM
  #33  
Jar
Donating Maxima.org Member
iTrader: (2)
 
Join Date: Oct 2004
Posts: 329
Damn thats a sweet looking setup, I wish I was ready for this part of my project now, but i'm afraid that i'm a long ways off......sigh , LOL
Jar is offline  
Old 12-21-2005, 12:57 AM
  #34  
Sports Button FTW
iTrader: (22)
 
meccanoble's Avatar
 
Join Date: Jan 2002
Location: NJ
Posts: 9,294
omg, forget exhaust, at 2000< supercharger is the way to go, just run stock power and as u upgrade exhaust u upgrade pulley size, kind of like warming up the engine to real power .

that charge pipe was the only thing that worried me. thought we would have to purchase seperate from stillen or something.
meccanoble is offline  
Old 12-21-2005, 08:16 AM
  #35  
Supporting Maxima.org Member
iTrader: (27)
 
Join Date: Aug 2004
Posts: 776
Stillen Inventory

Has anyone considered negotiating with Stillen to purchase all of the leftover parts and pieces associated with their VQ30 superchargers for cheap, like 25 on the dollar? Something like that would have to be a decision by someone much further up their food-chain than Adam Hume. But as a business proposition, once they decided to discontinue the product and have sold off the last of the complete kits, bulk disposal of the rest of that inventory might make good sense (at least to someone with a sharp business mindset like Steve Millen).
Curt is offline  
Old 12-21-2005, 11:15 AM
  #36  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by Curt
Has anyone considered negotiating with Stillen to purchase all of the leftover parts and pieces associated with their VQ30 superchargers for cheap, like 25 on the dollar? Something like that would have to be a decision by someone much further up their food-chain than Adam Hume. But as a business proposition, once they decided to discontinue the product and have sold off the last of the complete kits, bulk disposal of the rest of that inventory might make good sense (at least to someone with a sharp business mindset like Steve Millen).
The problem with that is that they dont have much left

-matt
matty is offline  
Old 12-21-2005, 09:12 PM
  #37  
Supporting Maxima.org Member
iTrader: (1)
 
stephenlc's Avatar
 
Join Date: Oct 2002
Posts: 3,243
question is that all the bolts and nuts we need? We just use the bolts from the timing chain cover to secure the plate?
stephenlc is offline  
Old 12-21-2005, 09:25 PM
  #38  
Supporting Maxima.org Member
Thread Starter
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,162
Originally Posted by stephenlc
question is that all the bolts and nuts we need? We just use the bolts from the timing chain cover to secure the plate?
NO. You will need longer M6 bolts and M10 bolts to reach the Timing cover. All the bolts you need will be included in the Starter Kit along with washers or they can added to the "Convertion Kit". The reason they're not included in the convertion kit is because the people purchasing the "Convertion Kit" will already have a full V2 kit. But will want to Invest in the V1 Plate Setup so they'll have a Worry FREE, Belt Shredding FREE, Blower Setup...

I added the Case Bolts and the bolts for the "Plate to Blower" so its one less thing you will need to worry about. The Drain back plate is also being added so no-body will have to make the crusial desicion on what Angle to put the drain port on, worry about getting it welded, and worry about purchasing more then one water pump cover from Nissan incase they mess up.

-matt
matty is offline  
Old 12-21-2005, 09:39 PM
  #39  
Member
 
Join Date: Mar 2004
Posts: 170
mine will be on by friday so i will have to put together a write up. looks great so far.
wadecarlson is offline  
Old 12-22-2005, 09:32 AM
  #40  
Senior Member
iTrader: (7)
 
Join Date: Oct 2000
Location: Montreal - Qc
Posts: 4,553
PM sent Matty.
doublea is offline  

Thread Tools
Search this Thread
Quick Reply: FS: *NEW* V1 S/C Plate Kits...


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.